AG Publications Aquafax Equipment Catalogue

TRIM TABS

www.aquafax.co.uk

LENCO EMLEACINTRHICEATDRINMGTAB KITS

EXTREME DUTY (XD) PERFORMANCE TRIM TAB KIT

EXTREME DUTY (XD) PERFORMANCE TRIM TAB KIT

12V SYSTEM/DUAL ACTUATOR

12V SYSTEM/SINGLE ACTUATOR

All the robust features of our single actuator XD series with twice the actuator power for large, faster boats that don't back away from rough conditions. Boat lengths 23' (7m) to 50' (15.2m).

The only single actuator Extreme Duty design offered. This kit is similar to our Heavy Duty Performance series with a thicker, stronger blade for those boaters who run hard in extreme conditions. Boat lengths 20' (6.1m) to 40' (12.2m).

5 YEAR WARRANTY

5 YEAR WARRANTY

SUPPLIED FULLY ASSEMBLED

SUPPLIED FULLY ASSEMBLED

Blades are constructed of Electro-Polished 10-gauge (3.4mm) laser cut 304 stainless steel with 1" (2.5cm) turned up edges and 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5mm) diameter hinge pin. Full transform back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5mm) stainless steel mounting bolts. 3.75" (9.5cm) sacrificial anodes installed. Kit includes: • (2) 10-gauge stainless steel electro-polished blades. • (2) 4-46579 XD Extreme Duty actuators 6' (1.8m) leads and Deutsch connectors. • Lenco owner's/installation manual. • Note: boat-mounting hardware to be supplied by the customer. • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required).

Blades are constructed of Electro-Polished 10-gauge (3.4mm) laser cut 304 stainless steel with 1" (2.5cm) turned up edges and 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5mm) diameter hinge pin. Full transform back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8" (9.5mm) stainless steel mounting bolts. 3.75" (9.5cm) sacrificial anodes installed.

147

Kit includes: • (2) 10-gauge stainless steel electro polished blades. • (2) 4-46579 XD Extreme Duty actuators 6' (1.8m) leads and Deutsch connectors. • Lenco owner's/installation manual. • Note: boat-mounting hardware to be supplied by the customer. • Note: Actuator extension harnesses not in kits, must be purchased separately (2 required).

SIZE DESCRIPTION L = Length of tab

The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transform. This applies to all products with back plates.

W

= Width of Hinge

Size description to be used with chart below.

The actuator leads pass through the water-tight mechanical strain-relief cable seal and the back plate before passing through the transform. This applies to all products with back plates.

MIN. TRANSON HEIGHT

BOAT LENGTH

PART NO.

L X W

4-46572 4-46573

19"X14" 24"X14"

23'-45' 25'-50'

10.5" (26.7cm) 10.5"(26.7cm)

MIN. TRANSON HEIGHT

BOAT LENGTH

PART NO.

L X W

4-46571

17"X12"

20'- 40'

10.5" (26.7cm)