AG Publications Aquafax Equipment Catalogue

PAINT & VARNISH

www.aquafax.co.uk

MAIN HEADING INTERNATIONAL PRIMERS & OSMOSIS PROTECTION VC ® TAR2 2 Pack • Osmosis defence for GRP and anticorrosion barrier for metal. • Advanced self-levelling formulation requires no sanding between coats. • Smooth surface – ideal primer base for antifoulings. Area: Below the waterline. Finish: Semi Gloss Practical Coverage (m²/Lt): 11.3 No. of coats: 3 - 7 Substrates: GRP, Steel, Aluminium, Lead Application: Brush, Roller, Spray Thinner: VC ® General Thinner Black COLOUR 5-60850 5-60851 5-60852 750ML 2.5 LITRE 5 LITRE

PRIMOCON ® Grey Single Pack Primer • Conventional one-part primer for use below water.

• Quick drying, with anticorrosive properties. • Can be used under all major antifoulings* or as a conversion coat over incompatible or unknown antifoulings. Area: Below the waterline. (*Do NOT use with VC ® 17m systems) Finish: Matt No. of coats: 1 - 5 Practical Coverage (m²/Lt): 7.4 Substrates: GRP, Wood, Steel, Aluminium, Lead, & Zinc Application: Brush, Roller Thinner: No. 3

1 LITRE

2.5 LITRE

5-60870 5-60871

Off White 5-60872

–

GELSHIELD ® 200 • Quick drying, easy to apply, epoxy primer for protection of GRP against osmosis. • Provides protection against osmosis in 5 coats. • Usable down to 5°C. • Fast drying allows multiple coat application in a single day. Area: Below the waterline. Finish: Matt Practical Coverage (m²/Lt): 8.1

INTERPROTECT ® • Quick drying, easy to apply, two-part epoxy primer. • Offers excellent anticorrosive protection. • Can be used as an antifouling tie-coat over existing epoxy primers or unknown primers. Area: Above & below the waterline. (Do NOT use over one-part products or

antifoulings) Finish: Matt Practical Coverage (m²/Lt): 8.1 No. of coats: 1 - 5 Substrates: Wood, Steel, Aluminium, Lead, Zinc Application: Brush, Roller Thinners: No.7

253

No. of coats: 5 - 6 Substrates: GRP Application: Brush, Roller Thinner: No. 7

White 5-60880 5-60881 Grey 5-60882 5-60883 COLOUR 750ML 2.5 LITRE

Green 5-60860 5-60861 Grey 5-60862 5-60863 COLOUR 750ML 2.5 LITRE

INTERTUF 16

GELSHIELD ® PLUS • A high build, solventless epoxy primer. • Available in two colours to aid self-on-self application. • Contains no harmful solvents to migrate into the hull and cause reblistering. Area: Below the waterline. Finish: High Sheen Practical Coverage (m²/Lt): 6.0 No. of coats: 4 Substrates: GRP. Apply to hull after removing Gel coat Application: Brush, Roller DO NOT THIN UNDER ANY CIRCUMSTANCES

Narrowboat Hull Blacking • Specifically developed for the economical protection of steel. • Tough, non-cracking coating offers protection against rust and is ideal for narrow boat Blacking. • Chemically resistant to mild acids & alkalis. Substrates: Steel Application: Airless Spray, Brush, Roller INTERZONE 954 A two component, low VOC, high solids, mod ified epoxy barrier coat designed to give long term protection from a single coat application. It will continue to cure when immersed in wa ter and has excellent cathodic disbandment re sistance. Interzone 954 was primarily designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions make it ideal for coping with tidal movements & surges. It may be applied to re oxidised and slightly damp surfaces and should be mixed in a 4:1 mix by volume. Can be tinted to any BS or Ral number, contact us for details. Also available in 20 litre drums. Finish: Gloss Application: Airless Spray, Air Spray, Brush, Roller Black

Applies to 20L

COLOUR 5 LITRE

20 LITRE

5-60891 5-60892

COLOUR 2.25 LTR

5-60867 5-60869

Green

Blue

NEW PRIMER / UNDERCOAT

One UP is a single pack primer/undercoat for use above the waterline with International one-pack finishes and deck paints. Simple yet effective, making

painting easier for DIY customers without compromising on aesthetic appearance or substrate protection. Replaces Yacht Primer and Pre-Kote whilst still delivering the same levels of adhesion and protection.

5-60800 5-60801 5 LITRE 20 LITRE

Applies to 20L