AG Publications Aquafax Equipment Catalogue

PAINT & VARNISH

www.aquafax.co.uk

MAIN HEADING INTERNATIONAL COMMERCIAL MARINE PAINT PRODUCTS

FOR PROFESSIONAL USE ONLY

INTERTUFF 362 BLACK 20L • Hard wearing, surface tolerant two pack epoxy primer. • High performance anticorrosive coating for use from keel to rail. • Suitable for use with controlled cathodic protection. • Supplied as 15L Base & 5Ltr Curing agent. Part No. 5-60895 Theoretical Coverage (m²/Lt): 4.47 @ 150 microns dft Substrates: Steel/Iron & Concrete Application: Airless spray, brush/roller Thinners: No. 7

INTERTUFF 203 ALUMINIUM 20L Vinyl Anticorrosive • One pack tar free vinyl anticorrosive for both above and below the waterline. • Can be used as a sealer coat over Tributyltin (TBT) antifoulings. • Suitable for use with controlled cathodic protection. Part No. 5-60893 Theoretical Coverage (m²/Lt): 5.33 @ 75 microns dft Substrates: Steel, Cast Iron, Lead Application: Airless spray, brush/roller Thinners: No. 3

CLEAR WOOD SEALER Clear Polyurethane Primer

• Premium fast drying, clear two-pack polyurethane primer. • Fast drying properties enables up to 4 coats to be applied in one day (at 23ºC un-thinned). • Suitable for use above the waterline on both interior and exterior surfaces. • Provides an exceptional impact, scratch and wear resistant primer surface ready for over coating. Practical Coverage (m²/Lt): 10.0 (Brush/Roller) No. of Coats: 4 Coats minimum. No. of coats depends on the porosity of the wood. More coats may be required to fill the wood grain. Substrates: Marine plywood and tropical hardwood Application: Conventional Spray, Brush/roller Thinners: No. 9

261

2 Part Epoxy 1:1 volume mix, order base and curing agent separately. 5-60740 Curing Agent (Fast) 5L 5-60741 DESCRIPTION PART NO. Base (Fast) 5L

EPIGLASS HT9000 Epoxy Resin • Versatile epoxy resin system

suitable for sheathing, laminating, filling and fairing, & gluing on boats of all types. • Solvent free and low odour ensuring a cleaner environment.

INTERFILL 830 Epoxy Profiling Filler • Suitable for profiling above and below the waterline on steel, aluminium and composite hulls. • Two part light grey epoxy formulation can fill up to 1" (25mm) thick in one coat without sagging or slumping. • High strength and impact resistant waterproof filler. • Particularly suitable for application over large areas at low temperatures & easily sanded. 2 Part Epoxy 1:1 volume mix, order base plus either standard or fast curing agent separately. Applies to 10L

• Low viscosity for ease of mixing and wet out.

Applies to 20L

BULK PACKS

PART NO.

DESCRIPTION

2.5 LITRE 10 LITRE

5-60770 5-60771 5-60772 5-60773 5-60774

Epoxy Resin Base 20L Std Curing Agent 5L Fast Curing Agent 5L Slow Curing Agent 5L

5-60754 5-60756 5-60758

5-60755 5-60757 5-60759

Base

Std Curing Agent Fast Curing Agent

HT80 Pump Set

INTERFILL 833 Epoxy Finishing Filler

2 Part Epoxy resin 4:1 volume mix, order base plus either standard, fast or slow curing agent and pump set for ease of measuring mix quantities.

• For use over Interfill 830 to correct minor surface defects before applying finishing coats. • Fine grade extenders give extra smooth results. • Contrasting colour to Interfill 830 for easier surface preparation & easily sanded. • Can be applied using a trowel, filling knife or fairing batten to a thickness of 0.3cm.

DESCRIPTION

2.5 LITRE

PROJECT PACKS

PART NO.

2 Part Epoxy 1:1 volume mix, order base plus either standard or fast curing agent separately.

5-60775 5-60776 5-60843

5-60760 5-60761 5-60762

Project Pack Fast 3.8L Project Pack Std 3.8L

Base

Std Curing Agent Fast Curing Agent

HT55 Pump Set