AG Publications Aquafax Equipment Catalogue

PAINT & VARNISH

www.aquafax.co.uk

MAIN HEADING OWATROL COATINGS

OWATROL MARINE OIL

DEKS OLJE D1 WOOD OIL

• Can be applied to both horizontal or vertical surfaces. • Saturates and protects all woods – soft and hard; oily and dense. • Excellent penetration – non-film forming. • Replaces the natural oils lost from the wood – will not blacken the timber. • Transparent – enhances the woods natural grain. • Deep penetrating, stabilises the timber - protects against moisture ingress. • Easy maintenance - no sanding or stripping. • Used alone, gives a silken matt finish or overcoat with DEKS OLJE D2 for a high gloss finish. For use on: Hardwoods and Tropical Timber (Oak, Chestnut, Teak, Mahogany, Movingui, Ipe, Bangkirai), Softwoods (Pine, Spruce, Larch). Interior or Exterior: boat decks, topsides on boats, flooring, paneling etc. Marine: Can be applied above or below the waterline, excellent PA-500 5-25011 1 LITRE 2.5 LITRE

Penetrating Rust Inhibitor • Stops rust and protects the base metal from further rusting. • Penetrates and protects down to the sound metal. • Drives out moisture and air and stabilises. • Leaves a bonding film on all surfaces. • Excellent adhesion including on galvanised steel, aluminium, zinc, wood. • Maintains the natural look of the surface (metal, wood, etc.) • Enhanced adhesion, ideal foundation for primers or finishing coats. • Allows paint to be applied direct to firm rust. • Heat resistance up to +175°C. Paint Conditioner • Makes alkyd paint rust inhibiting. • Improved paint flow and workability. • Better viscosity which allows painting to be carried out in cold, warm or windy conditions. • Replaces damaging thinners; improves hiding power of paint. • Deeply penetrates and seals wood. • Protects metal parts. 500ML 1 LITRE For use on: Ferrous and non ferrous metals, wood, plastics & glass. Coverage: 18m²/l Application: Brush, Roller, Spray CIP CORROSIVE INHIBITING PRIMER • Universal rust inhibiting primer for all paint types - will not dissolve or break down when high solvent paints are applied. • Penetrates and stabilises the surface, forming a solid stable layer that other coatings can firmly adhere to. • P igmentation offers increased protection and perfect film-forming qualities. • Easy to use, no need for sanding or sandblasting. • Use on new or rusted surfaces – interior and exterior. For use in: all severe environmental conditions: marine or tropical climates, corrosive fumes, protection of motor vehicles, ballast tanks of ships as well as every day items e.g. railings. Coverage: 15m²/l Application: Brush, Roller, Airless Spray OWATROL DECK CLEANER • L ightens & restores colour to all greyed weathered wood without bleaching. • Cleans and neutralises staining caused by tannins. • Removes all traces of weathering attributed to mould, mildew, pollution. • Restores luster to plastics dulled by weathering and UV rays. • Excellent degreaser for tropical hardwoods prior to applying DEKS OLJE D1 saturator. • Non aggressive – harmless to plants and shrubs. • Biodegradable – does not contain solvents or bleach (rinse with water). AC-145 1 LITRE For use on: Exterior wood – weathered grey or dirty: Cedar, Larch, Pine, Teak, Iroko, Ipe. For cladding, fences, decks, plastic, GRP. Coverage: 5 to 10m²/l Application: Stiff bristle brush AC-043 5-25003 5-25006 5-25005 750ML 2.5 LITRE • High temperature resistance up to 175 °c. • Especially recommended where a high resistant paint or two-pack finish (urethane, epoxy, chlorinated rubber, synthetic) is to be applied.

270

primer for conventional single pack marine coatings Coverage: 4m²/l (multicoat) 12m²/l (maintenance) Application: brush, roller

DEKS OLJE D2 WOOD OIL

• Flexible film that does not crack, peel or flake. • High gloss finish. • Highly transparent varnish – enhances the natural beauty of the wood.

• Offers long term protection. • No sanding between coats. • Easy maintenance. • Easy repair, no stripping.

1 LITRE

5-25015 2.5 LITRE

PA-501

For use on: Exotic hardwoods (Teak, Ipe, Mahogany, Movingui, Bangkirai) new or weathered. Interior or Exterior: window & door frames, paneling etc. Horizontal & Vertical. Boats – all applications above waterline. Coverage: 15m²/l Application: brush, roller GELCOAT RESTORER • Revives the colour and appearance of tarnished and dulled plastics and fibreglass (GRP) e.g boat hulls. • Rejuvenates and restores flat and chalky paint and varnishes dulled by weathering. • Restore the shine and protects chrome or polished metals: aluminium, chrome, brass, bronze. OWATROL MARINE STRIP • Solvent free, non-flammable, no toxic fumes - is easily removed with water. • Safe on all surfaces except Aluminium. Does not harm plastic, safe on GRP. • Very efficient - Will remove up to 8 coats of paint in one operation. • Will not affect 2 component or baked-on paints, polyurethane paint and varnishes. • Does not evaporate - long active work time. • Easy to apply Gel with prolonged stripping action. Does not run. AC-170 1 LITRE For use on: GRP, painted surfaces, polished metals. Coverage: 18m²/l Application: brush, rag 5-25018 500ML

For use on: All surfaces except Aluminium. Coverage: 4m²/l Application: brush, roller