AG Publications Aquafax Equipment Catalogue

SEALANTS & ADHESIVES

www.aquafax.co.uk

MAIN HEADING POLYURETHANE SEALANTS

3M 4200 FC ONE-PART ADHESIVE SEALANT REMOVEABLE

• A one-part general all-purpose polyurethane that chemically reacts with moisture to delivery flexible bonds with good adhesion to wood, fibreglass, gel coat, plastics and metals. • Paintable and sandable. • Forms watertight, weather-resistant seals on joints and boat hardware above or below the waterline.

Specifications: Size: 310ml Curing Time: 24 hours Tack Free : 2 hours

DESCRIPTION

PART NO.

5-06560/1 5-06564/1

White

Black

Note: Not recommended for sealing wood decks because it may be permanently softened by certain teak cleaners or sealers.

3M 5200 FC MARINE ADHESIVE SEALANT UNREMOVEABLE

3M 4000 UV ONE PART ADHESIVE SEALANT • A marine sealant and marine adhesive in one. • Seals joints on wood, fiberglass, metal and most plastics. • Resists weathering, saltwater, and stresses caused by joint movement. • This fast-curing high-performance polyurethane becomes tack free in one hour and fully cures in approximately 24 hours. • The seal is extremely strong, retains it’s strength above or below the waterline. It stays flexible too - allowing for structural movement. Stress caused by shock, vibration, swelling or shrinking is effectively absorbed. • Has excellent resistance to weathering and salt water. KORAPUR 925 MARINE Elastic one-part paintable polyurethane sealant / adhesive Korapur 925 is a new improved formula with reduced shrinkage (-3% instead of -6%), and provides better creep resistance while offering higher UV resistance for marine industry sealing and adhesive • Bonding: suitable for most marine substrates such as aluminium, stainless steel, plywood, glass, GRP, wood and for reducing vibration, (the use of a suitable Korabond primer is recommended to increase adhesion). • Sealing: Ideally suited for sealing joints above the waterline such as windows, portholes, hatches as well as bedding deck fittings. applications. Applications:

Specifications: Size: 295ml Curing Time: 24 hours Tack Free : 1 hour

DESCRIPTION

PART NO.

5-06520/1

White

283

Specifications: Size: 295ml

DESCRIPTION

PART NO.

5-06580

White, box of 12

Curing Time: 24 hours Tack Free : 22 minutes

• Fast curing and over paintable. • Elastic vibration-resistant joints and seals. • Non-slumping, ideal for vertical and overhead applications. • Good resistance to humidity, weathering & seawater. • Meets International Maritime Organization (IMO) requirements. • Non-corrosive, non-toxic and non-staining. • Low odour. • Available in either black or white 310ml cartridges.

DESCRIPTION

COLOUR SIZE

PART NO.

Technical Specifications

Korapur 925 +5ºC to +35ºC -40ºC to +90ºC

5-70124/1 5-70125/1

Polyurethane Sealant

White 310ml

Application Temp.:

Polyurethane Sealant

Black

310ml

Service Temp.:

Skin (Tack Free) Time*: Cure Rate (24 hours): Hardness (Shore A):

45 mins*

SEALANTS COVERAGE CHART (310ML CARTRIDGES)

3mm

45

WIDTH

Tensile Strength: Volume Change:

3 N/mm 2

3mm

5mm

9mm 12mm

3%

3mm 5mm 9mm 12mm

34.4

20.7 12.4

11.5 6.9

8.6 5.2

Elongation at Break:

650%

Shelf Life:

12 months

3.8

2.9

Storage Conditions: Store Dry at 5ºC to 25ºC *Standard Conditions: 23ºC & 50% Relative Humidity

DEPTH

2.1

Estimated average figures only. Coverage will vary with materials, application techniques & environmental conditions. Sealant coverage in metres.

KORABOND HG73 SEALANT PRIMER Primer for the pre-treatment of coated surfaces, glass, ceramics & stainless steel as a basis for subsequent bonding. 1Lt Part No. 5-70145