AG Publications Aquafax Equipment Catalogue

VENTILATION

www.aquafax.co.uk

RADIAL BLOWERS

JOHNSON PUMP HEAVY DUTY RADIAL BLOWER • Designed for engine compartment ventilation prior to start-up. • Motor rated for continuous operation and can be used as air intake or extraction to ventilate bilges, galleys, accommodation and other compartments. • Flange mount or flex mount design. • Double ball bearing motor with corrosion resistant stainless steel shafts and screws.

• High-impact anti-shock ABS body for Air 3 blower. • Nylon, glass-fiber reinforced body for Air 4 blower.

Specification:

Air 3

Air 4

Capacity: Voltage:

280m 3 /hr 163cfm 12V Amps: 3.9A 24V Amps: 2.5A

750m 3 /hr 441cfm 12V Amps: 4.5A

Air 4

Air 3

–

Air 3" 90º Bilge Blower 12V 10-47416-01 Air 3" 90º Bilge Blower 24V 10-47416-02 Air 4" 90º Bilge Blower 12V 10-47421-01 DESCRIPTION PART NO.

Mounting:

Flange Mount

Flex Mount

Dimensions (H x W x L):

198 x 171 x 195mm

297 x 257 x 182mm Inlet: Ø 150mm Outlet: Ø 110mm

Port Connections:

Inlet: Ø 75mm

Outlet: 92 x 80mm

ECS VENTILATION

The ecs ventiduct system This is one of the original ventilation systems specifically designed for marine use and is still one of the best. It is a proven reliable product; with thousands of units installed on both commercial and pleasure craft throughout the world in the last four decades.

Ventair & Ventilite Static Ventilators Attractive ventilator with low profile design to avoid snagging on ropes and offering safe ventilation at all times. With components made from non-corrosive materials, these vents give waterproof ventilation* and can be mounted at any angle. All units are supplied with an insect screen. The Ventilite versions allow sunlight to illuminate the interior space through the ventilator.*Except when submerged.

367

VENTILITE ROOF VENT No Cover High impact, virtually unbreak able. Size: 7" (17.8cm). Part No. 6-04201

VENTILITE ROOF VENT c/w S/Steel Cover Polished stainless steel with clear centre moulding. Size: 9" (22.8cm). Part No. 6-04205

VENTAIR ROOF VENT No Cover High impact, virtually unbreak able. Size: 7" (17.8cm). Part No. 6-04200

VENTAIR ROOF VENT c/w S/Steel Cover Polished stainless steel with white centre moulding. Size: 9" (22.8cm). Part No. 6-04204

VENTAIR & VENTILITE SHUT OFF UNITS These are a completely waterproof version of the ECS Ventair/Ventilite ventilators. In cases of excessive water flow over the decks or coach roof, an inner sleeve complete with flush handle, is closed by moving in an upward direction to ensure 100% waterproofing. This simple operation is carried out from within the cabin or wheelhouse, and vice versa; a downward motion returns the unit to the standard Ventair/Ventilite version. The inner sleeve does not inhibit airflow under normal circumstances. The inner baffle fits into a 92mm deck aperture and has a depth of 18mm below deck.

Ventilite Shut-off Vent c/w S/S cover Part No. 6-04480 Ventair Shut-off Vent c/w S/S cover Part No. 6-04481