AG Publications Aquafax Equipment Catalogue

First page Previous page 40 Next page Last page

PRODUCT GROUP SKIN FITTINGS & SCOOPS

MAIN HEADING www.aquafax.co.uk FORESPAR’S ® MARELON ® INTEGRATED PLUMBING SYSTEM Marelon ® is a proprietary formulation of polymer composite compounds that produces a superior marine grade product. For use above and below the waterline; precision moulded plumbing systems offer complete freedom from corrosion and the ravages of electrolysis. Forespar’s “93” series of valve systems are U. L. approved and A.B.Y.C. accepted. They also meet and exceed all mechanical property requirements specified by the International Standards Organization and are ISO Certified. Marelon plumbing components are also at least half the weight of their bronze counterparts. All Marelon ® integrated valves are sold as a complete system. The assembly consists of thru-hull, valve body and tailpipe barb or female pipe thread end. The thru-hulls use a Buttress style thread for exceptional strength and are not compatible with any other valves. Thru-hulls cannot be sold or used separately. All valves have one part number for the complete assembly. Each valve is factory assembled and pressure tested. Forespar ® cannot be held responsible for valves disassembled & modified or reassembled improperly. In case of an emergency; all non-screened thru-hull style valves are supplied with a handle cap/bung that is designed to plug the thru-hull from the outside. This plug can be put in place while vessel is in water. The valve can then be removed from the king-nut and any blockage cleared. Never leave a boat unattended while bung is in place and valve disassembled. This bung plug is for temporary use only. The bung can also be used during Winter storage to keep debris from collecting inside thru hull. Per ABYC/UL requirements, a flat surface approximately the same diameter as the king-nut is needed inside the hull for proper installation. All valves are full port. The I.D. of the hose barb is carried thru the ball so there is no restriction of flow. Dimensions available on request.

Special features: • For use above & below waterline. • Range of compact valve configurations to fit confined spaces. • Complete freedom from corrosion. • No electrical bonding required. • Can be used on aluminium, steel, wood and GRP hull forms. • Lightweight, yet extremely strong injection moulded parts. • UV Resistant, temperature range between -30ºC to + 80ºC. • U.L. approved & ISO certified A.B.Y.C compliant.

REINFORCED PLASTIC SEACOCKS SERIES 93 SEACOCK Mushroom outboard fitting.

Countersunk outboard fitting.

PART NO. HOSE CONNECTION

3-80161 3-80162 3-80163

3-80171* 3-80172 3-80173*

1/2" BSP 3/4" BSP

1" BSP

3-80164

3-80174

11/4" BSP

3-80165

3-80175*

11/2" BSP

Mushroom Illustrated

3-80166

3-80176*

2" BSP

SEACOCK Mushroom outboard fitting.

Countersunk outboard fitting.

PART NO.

CONNECTION

PART NO.

CONNECTION

3-80111 3-80112 3-80113

3-80141 3-80142 3-80143

1/2" Hose straight 3/4" Hose straight

1" Hose straight

3-80114

3-80144

11/4" Hose straight

3-80115

3-80145*

11/2" Hose straight

Counter Sunk Illustrated

3-80116

3-80146*

2" Hose straight

SEACOCK Mushroom outboard fitting.

Countersunk outboard fitting.

PART NO.

CONNECTION

PART NO.

CONNECTION

3-80121 3-80122 3-80123

3-80151* 3-80152 3-80153

1/2" Hose R/angle 3/4" Hose R/angle

1" Hose R/angle

3-80124

3-80154

11/4" Hose R/angle

3-80125

3-80155

11/2" Hose R/angle

Mushroom Illustrated

3-80126

3-80156*

2" Hose R/angle

Locking handle option available to order.

* Available to order.

Made with FlippingBook Ebook Creator