AG Publications Aquafax Equipment Catalogue

HORNS

www.aquafax.co.uk

MARINCO HORNS

SINGLE TRUMPET (24V)

• 100% stainless steel exterior. • Type 304 stainless steel diaphragm. • Includes laminated horn signal card and stainless steel mounting screws. • Dimensions (LxWxH): 419mm (16.5") x 101mm (4") x 120mm (4.75")

AIR HORN COMPRESSOR • Fits all Marinco AFI™ Air Horns. • Dimensions (DxL): 66mm (2.625") x 127mm (5") • Includes mounting bracket. • Maximum amp draw: 20 amps, produces 9 - 11 PSI.

• Maximum amp draw: 2.5 amps. • dB(A) rating: 118 at one meter. • Fundamental frequency: 390±15Hz. Part No. 6-11041

12V Part No. 6-11030 24V Part No. 6-11031

MARINCO WIPER SYSTEMS

The motor choice is based primarily on the size of the windshield and where the motor is to be installed, either in an exterior or interior location. Marinco motors are split into two categories, standard and heavy-duty with the categories being defined by the power range of the motors.

523

Within the two categories , there are motors designed for interior or protected installations, and motors designed for exterior installations.

The standard motor category includes the STD, WMW and 500 which are all designed for light duty use, defined as being able to drive a 14" arm and a 14" blade. When coverage of a larger windshield is required, Marinco offers the heavy-duty motors, which are capable of driving a wide range of arm and blade sizes, up to a 26" x 26" deluxe arm and blade combination, which would cover windshields up to 39". The 1000 motor can pull up to a 16" x 16" deluxe arm and blade combination.

The MRV is built for interior or well-protected locations, and has the power to pull a 22" x 22" deluxe arm and blade combination.

The 1.5 motor has the power to pull a 22" x 22" deluxe arm and blade combination like the MRV, but is awaterproof and builit for exposed installations. The 2.5 motor has the power to pull a 26" x 26" deluxe arm and blade combination and is waterproof for exposed installations.

CHOOSING THE RIGHT MOTOR

STALL TORQUE/ STALL CURRENT

COMPATIBLE BLADE LENGTHS

AVAILABLE SHAFT LENGTHS

MODEL VOLTAGE SPEEDS

SWEEP ANGLES

HOUSING

139 in-lbs/ 9A-10.5A 109 in-lbs/ 11.5A-13A 159 in-lbs/ 10.2A-12.2A

26" Deluxe 24" Premier 22" Deluxe 20" Premier 26" Deluxe 26" Premier 16" Deluxe 18" Premier 22" Deluxe 20" Premier (at 800 sweep)

Factory preset: 800 or 1100. Adjustable: 450 or 600 Factory preset: 800 or 1100. Adjustable: 450 or 600

Fully sealed powder coated aluminum Fully sealed powder coated aluminum

2.5

12V & 24V 2 Speed

2.5"

1.5" 2.5" 1.5" 2.5" 1.5" 2.5" 1.5" 2.5" 3.5"

1.5

12V & 24V 2 Speed

Factory preset: 800 or 1100 Adjustable to 400, 500 , 600 , 700, 800, 900 , 1000 or 1100 Factory preset: 650, 800 or 1100 Adjustable: 500 , 650 , 800 or 1100 Factory preset: 650, 800 or 1100 Adjustable: 500 , 650 , 800 or 1100

30.00

12V

2 Speed

Fully sealed aluminum

55 in-lbs/ 9.8A-10A

Fully sealed, UV stabilized hi-temp thermoplastic

1000

12V

Single

2 Speed (but can operate as 1)

109 in-lbs/ 11.5A-13A

Corrosion resistant cast housing

MRV 12 & 24V

Fully sealed, UV stabilized hi-temp thermoplastic Chrome plated brass case Corrosion proof aluminum alloy case

500

12V

Single

-

14" Deluxe

2.5"

Factory preset: 650, 800 or 1100

WMW 12V

Single

-

14" Deluxe

2.5" 2.5" 3.5"

Factory preset: 1100

Factory preset: 800 or 1100 Adjustable: 800 or 1100

STD

12V

Single

-

14" Deluxe