AG Publications Aquafax Equipment Catalogue

CIRCUIT PROTECTION

www.aquafax.co.uk

BLUE SEA FUSES & FUSE BLOCKS

ANL FUSE BLOCK SYSTEMS • Accepts 5/16" (M8) ring terminals. • Insulating cover satisfies ABYC/USCG insulation requirements. • Cover breakouts allow wire access in any direction. • Insert molded studs ensure secure fuse mounting. • Stainless steel studs provide resistance to corrosion and high torque. • UL 94-V0 base resists high heat. • Swing out design allows fuse replacement without removing fasteners.

8-25503 Fuse not included

Specifications

8-25503

8-25005

Voltage Max Operating: Amps Max Operating:

32 Volts DC

32 Volts DC

750A DC

300A DC

Terminal Stud Size: Mounting Holes:

5/16"-18 (M8)

5/16"-18 (M8)

Accept 1/4" Screw

Accept #10 (M5) Screw Up to 2/0 AWG (70mm 2 )

Cable Size:

Up to 4/0 AWG (120mm 2 )

Fuse Mounting Blocks: ANL Fuses available:

Tin-Plated Copper

Tin-Plated Copper

35 - 750 Amps

35 - 300 Amps

PART NO.

DESCRIPTION

AMPERAGE

WEIGHT KG (LB)

8-25503

ANL Heavy Fuse Block with cover

35-750A

0.66 (1.45)

8-25005 Fuse not included

8-25005

ANL Fuse Block with cover

35-300A

0.16 (0.35)

ANL FUSES • 6,000 Ampere Interrupt Rating satisfies ABYC requirements for main DC circuit protection on large battery banks. • Silver-plated connector blades for corrosion resistance. • Visible indication of blown fuse condition. Regulatory: Meets ISO 8846 and SAE J1171 external ignition protection requirements (40–500 Amps only).

PART NO.

AMPS

PART NO.

AMPS

562

8-25164* 8-25165* 8-25122* 8-25123* 8-25124* 8-25125* 8-25126* 8-25127* 8-25128*

8-25129*

35 Amp

200 Amp

8-25131*

40 Amp

250 Amp

8-25133* 8-25135* 8-25136* 8-25137*

50 Amp

300 Amp

60 Amp

350 Amp

80 Amp

400 Amp

100 Amp

500 Amp

8-25161

130 Amp

600 Amp

8-25163

150 Amp

750 Amp

Specifications Interrupt Capacity:

ANL ® Fuse

175 Amp

* Ignition Protected

6,000 Amps DC

Max. Voltage:

32 Volts DC

CLASS T FUSE BLOCK WITH INSULATING COVER - 110 TO 200A Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics. • Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse. • Insulating cover satisfies ABYC/USCG insulation requirements. • Cover breakouts allow wire access in any direction. PART NO. AMP REVISIONS ZONE REV. DESCRIPTION DATE APPROVED THIS DRAWING AND THE INFORMATION CONTAINED WITHIN IT ARE CONFIDENTIAL AND MAY NOT BE COPIED OR DISCLOSED WITHOUT THE WRITTEN PERMISSION OF BLUE SEA SYSTEMS.

8-25112 8-25113 8-25114 8-25115 8-25116

110 Amp 125 Amp 150 Amp 175 Amp 200 Amp

• Stud design ensures secure fuse mounting even with high heat. • Stainless steel studs provide resistance to corrosion and high torque. • One-piece stainless flange nuts ensure safe and secure connections. • UL 94-V0 base resists high heat. • Ignition Protected. 1.32in 33.5mm 2.00in 50.8mm 1 PRODUCTION RELEASE

2017.7.7 S. SCHANKEN

Specifications: Max Operating Voltage:

MOUNTING HOLES FOR 1/4" OR M6 HARDWARE

160V DC

Mounting:

1/4" (M) screws

6.25in 158.8mm 7.00in 177.8mm

THIS DRAWING AND THE INFORMATION CONTAINED WITHIN IT ARE CONFIDENTIAL AND MAY NOT BE COPIED OR DISCLOSED WITHOUT THE WRITTEN PERMISSION OF BLUE SEA SYSTEMS.

Fuse Mounting Blocks:

Tin-plated copper

ZONE REV.

1

PRO

1/4"-20 STUDS ACCEPT 1/4" OR M6 RING TERMINALS

SERRATED FLANGE NUTS - USE 7/16" SOCKET MAXIMUM TORQUE: 72 in-lb [8.1 Nm]

2.3in 58.4mm

1.32in 33.5mm

2.00in 50.8mm

1.17in 29.6mm

MOUNTING HOLES FOR 1/4" OR M6 HARDWARE

NAME

DATE

DIMENSIONS ARE SHOWN IN INCHES AND [MILLIMETERS] UNSPECIFIED TOLERANCES ARE:

DRAWN

2016.7.27 2016.7.26

J. RAU S. SCHANKEN

CHECKED - - -

425 Sequoia Drive Bellingham, WA 98226 Phone (360)738-8230 Fax (360)734-4195

ANGLES ±0°30'

MM

INCH

6.25in 158.8mm 7.00in 177.8mm

- - -

- - -

.0±.254 .00±.127 .000±.051

.0000±

.005 .002 .010

Part Number 5007100 Fuse Block ClassT IP 110-200A

.000± .00±

MATERIAL FINISH

COMMENTS:

THIRD ANGLE PROJECTION

--

1/4"-20 STUDS ACCEPT 1/4" OR M6 RING TERMINALS

DWG. NO.

SIZE A

REV.

--

5007100 --

1

DO NOT SCALE DRAWING

SCALE 1:2

WEIGHT:

SHEET 1 OF 1

SERRATED FLANGE NUTS - USE 7/16" SOCKET MAXIMUM TORQUE: 72 in-lb [8.1 Nm]

2.3in 58.4mm

1.17in 29.6mm

NAME

DATE

DIMENSIONS ARE SHOWN IN INCHES AND [MILLIMETERS] UNSPECIFIED TOLERANCES ARE:

DRAWN S. SCHANKEN

2016.7.26