AG Publications Aquafax Equipment Catalogue

CIRCUIT PROTECTION

www.aquafax.co.uk

BLUE SEA EASY ID ATC FUSES

EASYID™ ATC ® FUSES Fast-acting easyID™ illuminated blade fuses use Light Emitting Diode (LED) technology to show when a fuse has blown. • Tin-plated connector blades for corrosion resistance. • Sold in packs of 2.

EasyID™ ATC

® Fuses 30

PART NO. AMPS

Piece Kit contains: 3x 3A, 3x 5A, 3x 7.5A, 3x 10A, 6x 15A, 3x 20A, 3x 25A, 3x 30A, 3x 40A. Part No. 8-25290

8-25291 8-25292 8-25293 8-25294 8-25295 8-25296 8-25297 8-25298 8-25299

3A 5A

7.5A 10A 15A 20A 25A 30A 40A

Specifications Interrupting Capacity: Voltage Max. Operating:

1,000A 32V DC

BLUE SEA CLB CIRCUIT BREAKER BLOCKS

ST CLB CIRCUIT BREAKER BLOCKS

Compact surface mount solution providing secure screw termination where Push Button Reset-Only CLB Circuit Breakers are desired. • Quick connect clips allow circuit breakers to snap easily into place. • Tin-plated copper busses and screw terminals. • Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements. • Easy to open clip on cover. • Breakouts allow wire access in two directions. • Accepts ring terminals • Optional push button waterproof boots or dress nuts can be installed over cover. • Accepts square labels. • CLB circuit breakers sold separately (see below). Specifications Voltage Max. Operating: 32V DC Amperage Max. Operating: 32A (per circuit) Amperage Max. Operating: 100A (per block - common source) Temperature Min. Operating: -10°C Temperature Max. Operating: 60°C Breaker Type: Push Button Reset-Only Circuit Breaker with Quick Connect Terminals Screw Terminal: #8-32 Screws with Captive Star Lock Washer Mounting #8 Screw (M4) or #8 Nut PUSH BUTTON RESET-ONLY CIRCUIT BREAKERS • Branch circuit breakers (also used for 24-hour circuit protection). • Compact design enables high density circuit protection configurations. • Push-to-reset operation. • Trip Free design cannot be held ON during fault current condition. • Optional push button waterproof boot protects circuit breaker in wet environments. Regulatory: CE marked. UL Recognized - UL 1077–UL/cUL (USA and Canada), TUV certified. Meets UL 1500 and ISO 8846 external ignition protection requirements. PART NO. CIRCUITS NEGATIVE BUS SOURCE [A] WIDTH MM (IN) 169.90 (6.69) 284.20 (11.19) 8-25052 8-25054 6 Yes Yes Common Common 12

567

8-25052

8-25054

[B] MOUNTING CENTRES MM (IN)

143.0 (5.63) 257.3 (10.13)

WATERPROOF BOOT For push button reset-only CLB circuit breaker. • Incorporated into waterproof panels (p.584 585). • Protects circuit breaker in wet environments. • Replaces dress nut mounting on circuit breakers. • Sold in packs of 2. Regulatory: IP67 - protected against immersion up to 1m for 30 mins.

Specification: Interrupting Capacity:

PART NO. AMPS

3,000A @ 14.7V DC 2,500A @ 28V DC

8-27052 8-27054 8-27056 8-27057 8-27058 8-27059 8-27061

5A DC 10A DC 15A DC 20A DC 25A DC 30A DC 40A DC

Clear Part No. 8-24135 Specifications: Thread Material:

Voltage Max Operating:

32V DC

Temp Operating:

Min: -10°C, Max: 60°C

Nickel-Plated Brass

Type:

Thermal trip, manual reset 1/4" Male Quick Connect

Thread:

3/8"-27

Terminals: Mounting:

3/8" - 27 UNS

Mount Screw Torque:

6–8 in-lb Recommended