AG Publications Aquafax Equipment Catalogue

ELECTRICALS

ELECTRICAL PANELS

www.aquafax.co.uk

www.aquafax.co.uk

BLUE SEA METERS & MONITORING BLUE SEA MONITORING

24" Gasoline Tank Sender for exclusive use with VSM 422 • For tanks up to 24" deep Part No. 8-21811 When configured as a tank input, tank status can be represented in both capacity (gallons or litres) or as a percentage of capacity. Custom tank shapes can be auto calibrated or programmed. Both high and low level alarms can be set for all tanks. Part No. 8-21850 Regulatory Monitor face is IP66 - protected against powerful water jets, when installed according to instructions (see inside back cover). DC Specifications Nominal System Voltage: 12V, 24V, 36V, 48V Operating Voltage: 7–70V Minimum Current Draw: 15mA @ 12V, display off, 8mA @ 24V, display off Voltage Accuracy: +/- 1% Current Range: -500A to 500A Current Accuracy: +/- 1% M2 VESSEL SYSTEMS MONITOR (M2 VSM) Performs comprehensive monitoring of four critical systems in one compact organic LED digital monitor DC System Monitoring (up to two batteries) One input monitors the DC voltage, state-of-charge, current for one battery bank and another input monitors the voltage of an additional battery bank. Alarms include high and low voltage, high current, and low battery. AC System Monitoring The VSM monitors a single AC voltage, current, and frequency. Alarms include high and low voltage, high current, and high and low frequency. Bilge & Tank Monitoring The M2 VSM has two inputs that can be configured as a bilge or tank monitor. When configured as a bilge input, monitoring functions include pump active, cycle count in the last 24-hours, average cycles in a typical 24-hour period, and total cycles. High alarms can be set for both the minutes of run time in the last hour as well as the number or cycle counts in the last 24-hours.

27

598

VSM 422 ULTRASONIC TANK SENDERS • Anti-slosh algorithms for accurate readings • Ignition protected. • 32V DC Voltage Max. Operating. Connection Table System Inputs Functions DC 2

DC Voltage Battery 1, State-of-Charge, & Current DC Voltage Battery 2 AC Voltage, Current, & Frequency

AC

1

Limitations And Considerations For Mounting The Ultrasonic Tank Senders: • Senders are calibrated to the VSM 422 and will not function with other monitors. • Senders must be mounted 4" or greater distance from a tank side or baffle • Tank floor must not be sloped. • Tanks must not be deeper than 24" for the 8-21811 or 32" for the 8-21810. • Sender must be mounted perpendicular to the surface of the liquid. • To avoid voltage drop, the sender negative connection should be made as close as possible to the VSM 422. • Rapid filling and draining may interrupt reading output. Auxiliary 2 Auxiliary 1: Tank or Bilge Auxiliary 2: Tank or Bilge Retail Packaging Includes: Head unit, display cover, surface mount bezel, surface mount gasket, DC Current Shunt (8-28255), AC Current Transformer (8-28256), connectors, mounting screws and screw driver

8-21811

MINI CLAMP MULTIMETER • Clamp allows measurement of AC and DC current in wires without disturbing the circuits or contacting live terminals. • Auto range simplifies operation: 0.01 - 400 Amps, 0.001 - 600 Volts. • Auto power-off selection - power turns off automatically after 10 minutes of non-use. • True RMS - required for accurate measurement of inverter output. • Large digital display makes reading measurements easy. • Data hold - press “HOLD” button during measurement to lock reading value. • Test leads & carry case included with meter. Part No. 8-28110 AC Specifications Nominal System Voltage: 230V @ 50Hz, (Europe) Operating Voltage: 40–300V Voltage Accuracy (RMS): +/- 1% Current Range: 0–150A Current Accuracy (RMS): +/- 2% Frequency: 40–90Hz 8-21811 8-21810 Tank Senders Supported: 10–180 Ω VDO, 240–33 Ω Teleflex Blue Sea Systems Ultrasonic Tank Senders (sold separately) • For diesel, water, or waste Part No.8-21810 (32" tank depth) • For gasoline Part No. 8-21811 (24" tank depth) 32" Diesel/Water/Waste Tank Sender for exclusive use with VSM 422 • For tanks up to 32" deep Part No. 8-21810 8-21810

Specification AC Voltage: AC Current: DC Current: DC Voltage:

0.001 - 600 Volts 0.01 - 400 Amperes 0.01 - 400 Amperes 0.001 - 600 Volts

Resistance/Continuity Alarm:

0.1 - 40 Mohms

Maximum Clamp Size: Safety Classification:

30mm (1.18")

600 Volts, Category III

Range:

Auto

Low Battery Indicator:

Yes

LCD Display:

33/4 digits

Measurement Resolution:

4300 Counts

Sampling Rate:

Approximately 2 times/second

Operating Temperature Range:

0-50C (32-122F)

Operating Humidity: Operating Elevation: See page 588 of the Aquafax main catalogue for VSM 422 Ultrasonic Senders Below 80% RH (no condensation) up to 2000m above sea level