AG Publications Aquafax Equipment Catalogue

SHORE POWER DEVICES

www.aquafax.co.uk

SHORE POWER ACCESSORIES For use with 120/240V 50/60Hz Correctly installed the galvanic isolator will block galvanic currents in the shore earth connection up to 1.1V. Above this level current is allowed to pass maintaining the safety earth connection. For almost every combination of metals likely to be found at a mooring the 1.1V maximum is sufficient to block corroding currents. When the voltage at the earth connection is greater than 1.1V, current is allowed to flow through the galvanic isolator potentially corroding submerged metals on the boat. In this situation the shore power should be disconnected to avoid hull corrosion. DC galvanic current can also be caused by other shore earth connections such as telephone and cable TV. GALVANIC ISOLATOR WITH INDICATOR

• Designed, manufacturered and tested to meet ABYC. A28 standard. • Meets requirements of British Marine Industry Federation. • CE Marked • Fully encapsulated. • RF suppression built in. • Analogue indicator shows any DC current flowing in an easy to understand scale.

Amps:

16A

32A

Width: Depth: Height: Part No.

110mm

160mm

60mm

90mm

90mm*

130mm*

8-40990

8-40991

*(including mounting hole tabs).

MAINS CONSUMER UNIT This unit gives you maximum security with

MAINS INSTALLATION KIT A full kit to fit mains electricity into your boat. Part No. 8-50000

mains electricity in your boat. Dimensions : 110 x 95 x 180mm Part No. 8-50005

• 25 Amp 2 Pole 30mA RCD (Residual Current Devise) • A double pole 10A Miniature Circuit Breaker MAINS EXTENSION LEADS Sheath Colour: Orange Cable Diameter: 2.5mm 2 Part No. Length

622

Mains Installation Kit Contents: • Consumer unit (see 8-50005). • Surface mounted mains inlet. • 1.5m orange cable 3 x 2.5mm 2. • 1.5m yellow/green 6.00mm 2 earth bonding cable.

• 6m white 1.5mm flexible cable. • 2 single gang 13A switched socket including surface mounted boxes. • All necessary cable clips and fixing screws.

8-50010 10m site plug/coupler 8-50015 15m site plug/coupler 8-50025 25m site plug/coupler

8-50030

8-50033

8-50032A

8-50031

CONVERSION LEADS 13Amp plug to site coupler Part No. 8-50030 13Amp socket to site plug Part No. 8-50031

MAINS CONNECTION Mains site plug 55 x 120mm Part No. 8-50032A Mains site coupler 55 x 113mm Part No. 8-50033

FLUSH MOUNTED MAINS INLET SOCKET Aperture size (H x W x D): 90 x 80 x 90mm Overall Dimension (H x W x D): 105 x 106mm

SURFACE MOUNTED MAINS INLET SOCKET Surface mounted inlet. Complete with waterproof flap. Part No. 8-50034

Beige Part No: 8-50035 White Part No: 8-50036 Black Part No: 8-50037