AG Publications MC Equipment Catalogue Issue

- Water & Gas

Rule Bilge Pumps

Snap to shop these pages!

Rule Automatic Electric Bilge Pumps

Rulemate RM800B Submersible Bilge Pump The Rule RM800B is a fully automatic bilge pump incorporating field sensor technology that eliminates the need for a mechanical float switch. A great solution for a modern engine bay, the level sensor is sealed into the body of the pump and the pump is automatically activated when the sensor detects a 50mm level of water and switches off at 9mm.

Rule LoPro Automatic Submersible Bilge Pump LP900S

12V low profile automatic bile pump, ideal for tight areas. 3

Rulemate RM500B Submersible Bilge Pump The Rule RM500B is a fully automatic bilge pump incorporating field sensor technology that eliminates the need for a mechanical float switch. A great solution for a modern engine bay, the level sensor is sealed into the body of the pump and the pump is automatically activated when the sensor detects a 50mm level of water and switches off at 9mm. automatic modes, high level, low level and timer. 900 GPH, 3407 LPH. Fully rotational discharge outlet, and comes complete with hose tails for 3/4”, 1” and 1. 1/8” pipe. Power consumption 4A, use 7.5A fuse. WB-050

• Connections: For 19mm (3/4”), 25mm (1”) or 29mm (1 1/8”) bore hose on inlet and outlet. Straight or 90 deg elbow. • Dimensions: 112mm high, 130mm long, 73mm wide • Output: Up to 56 litres/minute (12 gallons/minute). Max. recommended discharge head 3m. • Fully automated bilge pump with integral sensor. • Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. • Back flow prevention to reduce the amount of water left over in the bilge. • Air vents in the body to help prevent air locks in challenging installations. • Quick release inlet strainer allows rapid cleaning. • Low current draw conserves batteries. WP-131

Rulemate RM1100B Submersible Bilge Pump

• Connections: For 19mm (3/4”) or 25mm (1”) bore hose on inlet and outlet. Straight or 90deg elbow. • Dimensions: 112mm high, 130mm long, 73mm wide. • Fuse Size: 4A • Output: Up to 31 litres/minute (7 gallons/minute). Max. recommended discharge head 2m. • Fully automated bilge pump with integral sensor. • Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. • Compact pump for smaller vessels. • Tough plastic body. • Back flow prevention to reduce the amount of water left over in the bilge. • Air vents in the body to help prevent air locks in challenging installations. • Quick release inlet strainer allows rapid cleaning. • Low current draw helps minimise battery capacity consumption. • Ignition protected and built in thermal cut-off. WP-130

The Rule RM1100B is a fully automatic bilge pump incorporating field sensor technology that eliminates the need for a mechanical float switch. A great solution for a modern engine bay, the level sensor is sealed into the body of the pump and the pump is automatically activated when the sensor detects a 50mm level of water and switches off at 9mm.

• Connections: For 19mm (3/4”), 25mm (1”) or 29mm (1 1/8”) bore hose on inlet and outlet. Straight or 90deg elbow. • Dimensions: 112mm high, 130mm long, 73mm wide. • Fuse Size: 7.5A • Output: Up to 69 litres/minute (15 gallons/minute). Max. recommended discharge head 2m. • Fully automated bilge pump with integral sensor. • Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode. • Compact pump for smaller vessels. • Tough plastic body. • Back flow prevention to reduce the amount of water left over in the bilge. • Air vents in the body to help prevent air locks in challenging installations. • Quick release inlet strainer allows rapid cleaning. • Low amp draw conserves batteries. • Ignition protected. • Actual Weight: 0.48 kg WP-132

Rule 98B Shower Sump Pump

Rule 98B shower sump box, for discharge of shower/basin waste water. Easy to remove clip on lid and mounting, Rule 800 bilge pump and Rule-matic float switch. • Connections: For 19mm (3/4”), 25mm (1”) or 29mm (1 1/8”) bore hose on inlet and outlet. Straight or 90deg elbow. • Dimensions: 230mm x 240mm x 130mm high.

• Fuse Size: 5A • Output: 50 litres/minute (11 gallons/minute). Max recommended discharge head 2.5m. • Contains Rule 800 Submersible. • Pump controlled by a Rule-a-Matic float switch. • Clip in, removable pump, strainer and cover allows easy cleaning and servicing. • Sealed clear screw-down cover. • Integral non-return valve. • Ignition protected. • Multi-port inlet. • Actual Weight: 1.58 kg WP-125

105

Tel: +44 (0)2476 390111

Fax: +44 (0)2476 390110

www.midlandchandlers.co.uk Midland Chandlers