AG Publications MC Equipment Catalogue Issue

Heating -

Stove Accessories

Roof Collar 5” Cast 13” x 6-1/2”

Squirrel Flue Collar 5”

Morso Squirrel stove 5.5” flue collar. Colour: Matt black Diameter (O/D): 5.5” Diameter (I/D): 5.1/4” Construction Material: Cast iron. HS-216

Roof collar suitable for solid fuel stove installations to fit 4” steel flue pipe. Specs: • Dimensions: (H x W x D) 5 3/4” x 13” x 6 1/2” • Flue pipe hole: 5” OD x 4 1/8” ID PLEASE NOTE: 2 x Hole Fixing Coach Bolts (product code HC-602) are required for fitting the collar. HC-501/M Roof collar with angled base for radius of roof, suitable for solid fuel stove installations to fit 4 1/2" steel flue pipe. Specs: • Dimensions: (H x W x D) 5 1/2" x 13" x 7" • Flue pipe hole: 6" OD x 5" ID PLEASE NOTE: 2 x Hole Fixing Coach Bolts (product code HC-602) are required for fitting the collar. HC-601/M Roof Collar 6" Cast 13" x 7"

Squirrel Small Flue Collar 4"

Morso Squirrel stove small 4" flue collar. Colour: Matt black Diameter (O/D): 5" Diameter (I/D): 4" Construction Material: Cast iron. HS-320

Inner Flue Pipe Only for N151K

Inner flue pipe only for N151/K

N151/IF

Socket Adaptor/Reducer Cast Iron

Trim Ring to Suit 4.5” OD Flue Pipe Brass Trim ring to suit 4.5” flue pipe. Specs: • Diameter: O/D 8”, I/D 4.5” • Fixings: 4 fixing holes for M4 counter sunk screws AB-054/M

Dimensions: 4.3/4” ID to 4.1/2” ID. Typical Application: Morso Squirrel. HF-462/M

Roof Collar Flat 6” Cast 13” x 7”

Trim Ring to Suit 4.5” OD Flue Pipe Chrome

Flat base roof collar suitable for solid fuel stove installations to fit 4.1/2” steel flue pipe. Specs: • Dimensions: (H x W x D) 5 1/2” x 13” x 7” • Flue pipe hole: 6” OD x 5” ID PLEASE NOTE: 2 x Hole Fixing Coach Bolts (product code HC-602) required for fitting the collar. HC-601/FLAT

Chrome trim ring to suit flue pipe with outer dimension of 4.5”. • Diameter: O/D 8”, I/D 4.5” • Fixings: 4 hole fixing/M4 counter sunk screws AB-112/M

Valiant Stove Fan Small

The heat powered stove fan is designed to circulate the warm air created by a stove. The fan gently and silently moves air from the hot zone around the stove to distribute the heat around the room. Warm air is moved towards the centre of the room rather than simply rising to the ceiling as it leaves the fireplace. This improved warm air circulation results in greater comfort and less fuel consumption. The fan is self-powered using heat from the stove to operate. The fan does not require batteries or mains power. The fan will begin to operate when the stove top reaches approximately 100°C and will slow down and come to a stop as the stove fire burns out. The industry standard 2 blade fan design, has been refined by Valiant this year to start at a lower temperature and push even more air thanks to an upgraded motor, still with the same robust design. The 2 blade fan is suitable for all stoves, especially traditional single skin cast iron stoves. All Valiant heat powered stove fans are ideal for use on wood burning stoves in homes, narrowboats, mobile homes and can also be used on kitchen ranges and hobs in contemporary and traditional environments. FA-001

200

Midland Chandlers Unit 1-5 Century Park industrial Estate, Ballin Road, Nuneaton, Warwickshire, CV10 9GA