AG Publications MC Equipment Catalogue Issue

Cruising -

Fenders

Small Transom Corner Fender White

Fender Hook White Plastic Each Shaped to suit cabin sides, white plastic. AS-054

This rugged, easy to install transom corner fenders are designed to provide protection to vulnerable transom corners on most cruisers and yachts. They can also be fitted to marina berths and finger pontoons for increased protection against your boat. Two horseshoe mounting clips are provided with each unit. This size can also bend to suit transom corners from 70 to 90 degrees. Length: 210mm Width: 210mm Depth: 100mm Weight: 0.4kg. Colour: White. NOTE: THESE ARE SEALED UNITS AND ARE NOT RE-INFLATABLE. AF-200

Stainless Square Fender Hook with Eye

Fender hook, designed to fit snugly over your boats handrail. Made of high quality 2mm thick 304 grade stainless steel. TIG welded, this item will not rust or break. The stainless link measures 6mm thick, giving a 12mm gap to fit rope or a shackle through.

Dimensions: Front face: 3”

Small Transom Corner Fender Blue

Top: 2.1/2” Back: 1.1/2” AS-056

AF-202

Small Transom Corner Fender Black

Stainless Round Fender Hook with Eye

AF-204

Round fender hook. Unlike the standard fender hook, the round is designed to fit snugly over your boats tubular handrail. Made of high quality 2mm thick 304 grade stainless steel, TIG welded, this item will not rust or break. The stainless link measures 6mm thick giving a 12mm gap to fit rope or a shackle through. AS-057

Large Transom Corner Fender Black

This rugged, easy to install transom corner fenders are designed to provide protection to vulnerable transom corners on most cruisers and yachts. They can also be fitted to marina berths and finger pontoons for increased protection against your boat. Two horseshoe mounting clips are provided with each unit. Length: 230mm Width: 250mm

Weld in Iron Fender Eye Recessed Stainless Steel Bar

Depth: 120mm Weight: 0.9kg Colour: Black.

Mild stainless steel self-colour weld in fender eye. Specs:

NOTE: THESE ARE SEALED UNITS AND ARE NOT RE-INFLATABLE. AF-214

• Stainless steel 8mm bar • 80 mm outside diameter • 66 mm cut-out • 36 mm overall depth

Large Transom Corner Fender Blue

• 30 mm fitted depth (in to hull) • Flange is 5 mm thick and 6mm wide all round AD-036/M

AF-212

Fender Eye Plate Brass 1-1/2” x 1-1/2”

Fender / Mooring Eye Recessed Brass

Baseplate dimensions: 1 1/2” x 1 1/2”

Brass fender mooring eye with Stainless Steel Bar. Diameter 3.3/8” OD. To suit hole cut out of 2.1/4”. 3 Hole Fixing Counter Sunk Screws. AD-086/M

AB-024

Fender Side Hook Powder Coated Steel Rod

Powder coated bent steel rod.

AS-052

254

Midland Chandlers Unit 1-5 Century Park industrial Estate, Ballin Road, Nuneaton, Warwickshire, CV10 9GA