AG Publications MC Equipment Catalogue Issue

- Paint & Varnish

International - Anitfouling

Snap to shop these pages!

Boatguard 100 Antifouling 2.5L A high strength ablative cuprous oxide anti fouling. Minimal build up due to self polishing technology. For application to hulls below the waterline after suitable priming to help prevent marine growth. Not suitable for high speed craft which are used frequently. Not suitable for stern drive units and/or props and shafts. Coverage (Theoretical) - 9.5 m²/lt.

Cruiser 250 - 750ml

Cruiser 250 is a polishing anti fouling, resulting in consistent anti fouling performance while the boat is motion. Offers year-round protection, in all but the worst fouling areas. *Use anti fouling paints safely. Always read the label and product information before use. One seasons protection in all but harshest fouling conditions. One coat to save time. For power (up to 25 knots) & sail boats. Can be re-immersed within 24 hours. Theoretical coverage: 8.5m²/lt.

Part No Product

Part No Product

PA-450

PA-171

Boatguard 100 Antifouling White - 2.5L

Cruiser 250 Navy - 750ml

PA-451

PA-174

Boatguard 100 Antifouling Blue 2.5L

Cruiser 250 Red - 750ml

PA-452

PA-176

Boatguard 100 Antifouling Red - 2.5L

Cruiser 250 Blue - 750ml

PA-453

PA-175

Boatguard 100 Antifouling Black - 2.5L

Cruiser 250 Blue - 3L

PA-454

PA-170

Boatguard 100 Antifouling Navy 2.5L

Cruiser 250 Navy - 3.0L

International - Hull & Tank Blacking

Intertuf JBA016 - 5L

Interzone Black 2 Pack EAZ999/EAA954 - 5L

Conventional, one component, high build, cold applied bituminous coating. Is specifically developed for the economical protection of steel. This tough, non cracking coating offers protection against rust and is ideal for narrowboat blacking. It is chemically resistant to mild acids and alkalis. PA-093 Conventional, one component, high build, cold applied bituminous coating. Is specifically developed for the economical protection of steel. This tough, non cracking coating offers protection against rust and is ideal for narrowboat blacking. It is chemically resistant to mild acids and alkalis. Approx. coverage is 10m² per litre. PA-067 Intertuf JBA016 - 20L

A high performance two component, high solids, modified epoxy barrier coat designed to give long term protection in a single coat application. Will continue to cure when immersed in water and has excellent cathodic disbondment resistance. Gloss finish. PA-139

Intertuf 362 2 Pack Epoxy Black - 15L+5L

A premium performance anticorrosive coating. Suitable for use with controlled cathodic protection. For use at new building, maintenance and repair or on board maintenance. Matt Finish. PA-255

International - Bilge Paint

Part No Product

Danboline Grey

PA-082

Danboline Grey - 750ml

Hard wearing coating for bilges, lockers and bulkheads. Chemical resistance to fumes, fuel and oil. High opacity for thorough coverage. Cleans easily for reduced maintenance. Theoretical coverage: 12.3m²/lt.

PA-083

Danboline Grey - 2.5L

PA-247

Danboline White - 750ml

263

Tel: +44 (0)2476 390111

Fax: +44 (0)2476 390110

www.midlandchandlers.co.uk Midland Chandlers