AG Publications MC Equipment Catalogue Issue

- Engineering & Tools

Gauges & Instruments

Durite Temp Gauge 0-523-23 - 1/8 Sender 12 volt . Supplied with 1/8” NPTF sender. Illuminated 52mm electrical dashboard gauge. Matt black bezels and white figures. Bridge type fitting. EI-004 Durite Pressure Gauge 6Bar 0-523-17 1/8 12 volt . Supplied with 1/8” NPTF sender. Illuminated 52mm electrical dashboard gauge. Matt black bezels and white figures. Bridge type fitting. EI-021

Tank Gauge Fresh Water

The unit works by measuring water pressure above the sensor. The result is displayed on a gauge because we believe this is the most accurate way of presenting the information and makes it easy to predict the “number of days to empty”. The gauge can be positioned anywhere in the boat as required. The in-line sensor is used where there is no access to the tank or the

construction of the tank is unsuitable. It is mounted between the tank and water pump using a 15mm or 22mm ‘T` fitting in the water pick up pipe between the tank and the pump. This is only suitable where the pipe can be run at approximately the same level as the bottom of the tank, we would suggest within 7.5 cm. The unit should be mounted within one metre of the tank, but if this is not possible please advise us when ordering. EI-100

Tank Gauge Fuel with Pipe + Kit

Durite Hour Meter 0-523-08

For 52mm diameter panel hole. 10 - 80 volt dc. Matt black rim and dial with white figures. Non illuminated. Bridge fitting 75mm deep. EI-026

Are you one of the growing band of boaters who would like to know how much diesel fuel you have without the need to go through the messy business of dipping the tank? This system meets the relevant requirements of the Boat Safety Scheme PROVIDED that the installation instructions are followed carefully. EI-101

Rudder & Tiller

Rudder Stock Bearing Square 1-1/2” Std

Rudder Stock Bearing Square 40mm

Rudder stock bearing square 1.1/2” STD E277

Rudder stock bearing square 40mm. SG-035

Part No Product SG-027

Part No Product SG-043

Warstock 1-1/2" Dia Std Unit

Bush 1-1/2" for Warstock Bearing

SG-028

Warstock 50mm Dia Std Unit

SG-044

Bush 40mm for Warstock Bearing

SG-029

Warstock 2" Dia Std Unit

SG-045

Bush 2" for Warstock Bearing

SG-032

Warstock 40mm Dia Std Unit

SG-046

Bush 50mm for Warstock Bearing

SG-055

Bush 1-1/4" for Warstock Bearing

21

Tel: +44 (0)2476 390111

Fax: +44 (0)2476 390110

www.midlandchandlers.co.uk Midland Chandlers