AG Publications MC Equipment Catalogue Issue

- Paint & Varnish

International -Thinners & Strippers

Snap to shop these pages!

Thinners No 7 - 1L

Thinners No 1 - 1L

Thinner No.7 has been specially formulated for thinning epoxy type products including Interprotect® and Gelshield® 200. It can also be used for equipment cleaning in association with nterfill 830, Interfill 833 and Watertite. PA-089

For use above the waterline, Thinner No.1 is a very good, general purpose thinner that’s designed to be used with one-part paints (excluding antifoulings) and varnishes. PA-087

Thinners No 9 - 1L

Thinners No 3 - 1L

Thinner No.9 is a very effective thinning agent for use with two part polyurethane products and/or cleaning equipment. PA-090

Thinner No.3 is suitable for antifouling paints (except for Micron® Optima and VC® products), bottom coatings and other special paints. It’s also used to help spray on our one-part varnishes and finishes. PA-088

Teamac - Antifouling

Teamac Antifouling Inland/Coastal

A cruiser grade ablative antifouling paint that slots into the middle of the Teamac range. This product offers competitive antifouling performance at a mid-range price. Suitable for vessels with a maximum speed of 25 30 knots. Has good compatibility. NOTES: Spray application by professionals only. Not suitable for aluminium. Surfaces: Metal, Wood, Glass Fibre. Application: Brush or Roller. Finish: Semi Gloss. Coverage: 10 square metres per litre.

Part No Product

PA-289

Mc Antifouling Inland/Coastal Red - 2.5L

PA-290

Mc Antifouling Inland/Coastal Blue - 2.5L

Teamac - Hull & Tank Blacking

Teamac Hull Blacking Bituminous Black Paint has many uses including touching undamaged hull blacking. Surfaces should be clean and dry and free from any loose flaking material. May be applied by roller or brush. Cleaning/thinning by White spirit. Surface drying less than 4 hours and thoroughly dry in less than 12 hours. Off Gloss finish. Coverage:10- 12 Sq. Metres per Litre.

Part No

Product

PA-292

Teamac Hull Blacking - 5L

PA-294

Teamac Hull Blacking - 20L

PA-319

Teamac Hull Blacking - 1L

Teamac - Bilge Paint

Part No Product

Teamac Bilge Paint

PA-281

Bilge Grey - 1L

Bilge paint provides protection for the inside surfaces of boats and yachts. Suitable for use on metal, wood and glass fibre boat surfaces. Can be applied by brush, roller or spray. Resistant to Oil, Diesel, Petrol, and Seawater. Off gloss finish. Theoretical coverage: 12m²/l.

PA-282

Bilge Red - 1L

PA-283

Bilge White - 1L

PA-284

Bilge Black - 1L

PA-285

Bilge Grey - 2.5L

PA-286

Bilge Red - 2.5L

267

Tel: +44 (0)2476 390111

Fax: +44 (0)2476 390110

www.midlandchandlers.co.uk Midland Chandlers