AG Publications MC Equipment Catalogue Issue

Consumables -

Sealants

Sikaflex 291i Multifunctional Adhesive Sealant 300ml Cartridge A multifunctional, one-component polyurethane sealant, specifically developed for the marine market. Sikaflex®-291i is a non-sag sealant suitable for making elastic, vibration-resistant joint seals and can also be used for a variety of interior sealing applications. It

Geocel Marine 310ml Cartridge

A silicone rubber sealant that fills and caulks gaps, joints and cracks around the boat. It is suitable for sealing joints where pipes or trunking for machinery pass through decks or bulkheads, and for sealing around hatches, port holes and windows, where a watertight flexible seal is required. Adheres to glass fibre, metal, glass, painted or varnished wood, and most plastics. It can also be used for bedding-in deck and hull fittings, or for making gaskets in situ for water pumps, exhaust systems, etc. Unaffected by immersion in salt or fresh water.

bonds extremely well to the materials commonly used in marine construction such as wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). NOTE: Sikaflex®-291i must not be used to seal plastics that are prone to stress cracking (e.g. PMMA, PC, etc.). This product is suitable for experienced professional users only. Test with actual substrates and conditions must be performed to ensure adhesion and material compatibility.

Part No

Product

Part No

Product

SK-408851

AM-023

White

White

SK-408852

AM-024

Black

Black

AM-026

Clear

Bostik Simson ISR 70-03 Sealant

Alsco Marine Sealant Adhesive

Simson ISR 70-03 is a good compromise between an adhesive and a sealant, based on Silyl Modified Polymer. ISR 70-03 is suitable for making elastic constructive joints, which also require a high strength. Elastic bondings and sealing in e.g. caravan, boat, and motorhome construction. Bonding and sealing of rooflight systems. Bonding of aluminium or polyester corner profiles on trailers. Bonding of polyester parts on metal frames. Bonding of floor systems. Sealing welded seams. White. 290ml Tube. N304 Sika Remover-208 Solvent Based Cleaning Agent 1 Litre A solvent-based cleaning agent designed for pre-cleaning strongly contaminated non-porous substrates and removing uncured excess of Sikaflex® adhesive or sealant from soiled surfaces and application tools. When cleaning painted surfaces, the user should wipe the surface

For flexible, long term, high strength bonding of deck hardware, sealing above and below the waterline, bonding GRP components and structure. General sealing and bonding including keel, hull stern shaft tube, plumbing and sanitary equipment and for metal to metal flexible joints. After completing application, ensure material is kept dry and undisturbed for at least 12 hours.

Part No

Product

AM-066

Black

AM-067

Grey

AM-068

White

Clesse Anaerobic Sealing Adhesive 50ml

Clessetite anaerobic adhesive for the sealing of metal thread pipe joints. Suitable for natural gas, LPG, compressed air, gasoline and oil. Not approved for use on drinking water fittings. W10

with a rag/paper towel moistened with Sika® Remover-208. For removal of Sikaflex® residue, the user should remove bulk residue with a knife or spatula, then use a rag or towel with Sika® Remover-208 to wipe off the remaining sealant or adhesive. NOTE: Sika® Remover-208 is suitable for experienced professional users only. Tests with actual substrates and conditions must be performed to ensure adhesion and material compatibility. SK-34288

Clesse Anaerobic Sealing Adhesive 250ml

Clessetite anaerobic adhesive for the sealing of metal thread pipe joints. Suitable for natural gas, LPG, compressed air, gasoline and oil. Not approved for use on drinking water fittings. 250ML W11

316

Midland Chandlers Unit 1-5 Century Park industrial Estate, Ballin Road, Nuneaton, Warwickshire, CV10 9GA