AG Publications MC Equipment Catalogue Issue

Appliance Spares -

Eberspacher Spares

O-Rings for Water Pump

O-Ring for Temp/Overheat Sensors for Hyd4/5 (S1)

O-rings for water pump for Hydronic 4 and 5 (S1) heaters, with product code 252257 (Hyd 4) and 252219 (Hyd 5). Supplied as a pair. EB-086

O-ring for temperature/overheat sensors for Hydronic 4 and 5 (S1) heaters, with product code 252257 (Hyd 4) and 252219 (Hyd 5). Sold individually. EB-082

O-Ring for Heat Exchanger

O-ring for heat exchanger for Hydronic 4 and 5 (S1) heaters, with product code 252257 (Hyd 4) and 252219 (Hyd 5). EB-084

Alde Spares

Alde Rubber Elbow & Clips (1900-523)

Alde Bubble Tester 8mm (4071-805)

Rubber elbow & clips. Alde rubber connectors are made from

The 4071 Leak Detector is intended for in-line installation, and should be connected into the gas system close to the outlet side of the regulator. It provides an instant visible check on gas soundness from the outlet side to each installed appliance, a leaking system being positively indicated

EPDM rubber, tested and used in central heating systems for over a decade. Compatible with the 22mm aluminium heating circuit, tube can be fitted to the rubber by hand. Always ensure there is at least 30mm of tube inside the rubber connector, and a fitted spring clip, for the heating circuit to be watertight. Reference/ Manufacturer Number: 1900-523. HG-050

by bubbles appearing in the glass-sighting chamber. The Boat Safety Scheme and the new British Standard both recommend that one be fitted in an installation. HG-014

Alde Integrated Circulation Pump 12V (3010-522)

Alde Bubble Tester 10mm (4071-808)

The compact heavy duty inline circulation pump is typically used in marine applications with the Compact 3000 and 3010. This unit has five selective speeds, noise reducing composite construction and integral overheat protection. The best Alde circulation pump yet, it effectively replaces the 2928 420 12 V pump and 2750-405 230 V pump.

The 4071 Leak Detector is intended for in-line installation, and should be connected into the gas system close to the outlet side of the regulator. It provides an instant visible check on gas soundness from the outlet side to each installed appliance, a leaking system being positively indicated by bubbles appearing in the glass

sighting chamber. The Boat Safety Scheme and the new British Standard both recommend that one be fitted in an installation. Reference/Manufacturer Number: 4071-920. HG-005

It is powered by 12 VDC, drawing 0.2-1.9 A, and comes with 22 mm connectors. It can also be used in 15 mm or large, complex heating circuits. HG-073

Alde Bubble Tester Refill 4070-125

Replacement Top up Fluid for Alde 4071 Bubble Leak Tester. Reference/Manufacturer Number: 4070-125 HG-003

336

Midland Chandlers Unit 1-5 Century Park industrial Estate, Ballin Road, Nuneaton, Warwickshire, CV10 9GA