AG Publications MC Equipment Catalogue Issue

Useful Information

Unit Conversions

Length Conversion

To Convert: Bars Centigrade Centimetres Cubic Centimetres

Into: Pounds/Sq In Fahrenheit Inches Cubic inches Cubic metres Gallons Litres Centigrade Centimetres Metres

Multiply By: 14.5 Cx9/5+32 0.3937

Metres: 1.00

Feet: 3’3” 4’1” 4’11”

Metres: 8.00 8.50 9.00 9.50

Feet: 26’3” 27’10” 29’6” 31’2” 32’10” 34’5” 36’1” 37’9” 39’4” 42’8” 45’11” 49’3” 52’6” 55’9” 59’0” 62’4” 65’7” 68’11” 72’2” 75’6” 78’9” 82’0” 98’5” 164’0” 246’1” 328’1” 820’3”

1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50 4.75 5.00 5.25 5.50 5.75 6.00 6.25 6.50 6.75 7.00 7.50 7.75

0.06102 0.02832 6.235 28.32 F-32/9x5 30.48 0.3048 277.2 4.542 0.83267 10.0 0.7457 2.540 2.205 7.233 1.341 1.151 0.03531 61.02 0.22017 1.761 3.281 39.37 1.094 1.853 0.8684 0.03937 0.1383 0.1604

5’9” 6’7” 7’5” 8’2” 9’0”

Cubic Feet Cubic Feet Cubic Feet Fahrenheit Feet Feet Foot Pounds

10.00 10.50 11.00 11.50 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 30.00 50.00 75.00

9’10” 10’8” 11’6” 12’4” 13’2” 13’11” 14’9” 15’7” 16’5” 17’3” 18’1” 18’10” 19’8” 20’6” 21’4” 22’2” 23’0” 24’7” 25’5”

Kg-metres Cubic feet Cubic inches Litres Gallons (imperial) Pounds water Kilowatts Centimetres Pounds Foot-pounds Horsepower Statute Miles/hour Cubic feet Cubic inches Gallons Pints Feet Inches Yards Kilometres Knots Inches Litres

Gallons Gallons Gallons Gallons (US) Gallons Water Horsepower Inches Kilograms Kilograms-metres Kilowatts

Knots Litres Litres Litres Litres

100.00 250.00

Metres Metres Metres Miles (Nautical)

*Feet measurements are approximate.

Miles/Hour Millimetres Pints (Liq) Pounds

BSP / NPT Identification (Approx.)

0.5678 0.4536 1.488 0.09290 10.76 1016.0 Watts divided by volts = amps

BSP & NPT 1/8” ¼” 3/8”

‘B’ (Approx) 10mm (3/8”) 13mm (½”) 16.5mm (5/8”) 21mm (13/16”) 26mm (1”) 33mm (1-5/16”) 42mm (1-5/8”) 47mm (1-7/8”) 59mm (2-5/16”) 75mm (3”) 87mm (3-5/16”) 112mm (4-1/2”)

Kilograms Kgs/metre Square metre Square feet Kilograms Amps

Pounds/Foot Square Feet Square Metres Tons Watts

½” ¾” 1”

1-1/4” 1-1/2” 2” 2-1/2”

Flexible Engine Mount Guide

Dimension ‘B’ measures the OD of the thread.

Weight on each rear mount= W x a 2 x (A + B) Weight on each Front mount= W x b 2 x (A + B)

3” 4”

Working Out A Taper

1. Subtract dia (a) from dia (b) 2. Divide dim © by answer to 1 3. Taper is therefore answer to (2):1 E.g (a) = 0.75” (b) = 1” (c) = 2/5” Example (b) 1”- (a) ¾” = 0.25 (c) 2.5 divided by 0.25 = 10 1 in 10 is standard Metric Taper 1 in 12 is standard Imperial Taper

• • •

Engine model and number of cylinders Model of gearbox and reduction ratio Total weight of engine and gearbox

• Is the flywheel in the conventional place between the engine and the gearbox? • Position of the engine mountings • Find the centre of gravity (balance point). If you cannot find the centre of gravity, then you may wish to assume that the weight distribution is 60% on the rear flexible mountings and 40% on the front flexible mountings, if the rear mounting is in line with the flywheel Please contact us if you require any help with the correct selection for your application.

391

Tel: +44 (0)2476 390111

Fax: +44 (0)2476 390110

www.midlandchandlers.co.uk Midland Chandlers