AQX Catalogue 2023

Autopilots Drive Units & Accessories

3. CHOOSE A DRIVE UNIT B&G Pilots are compatible with a number of third-party drive units in addition to B&G models.

HYDRAULIC RAMS

A high power, efficient 12V/24V hydraulic autopilot drive unit that enables the Power Steer Mode on a Pilot to be used in case of manual steering failure. This drive works in conjunction with the NAC-2 autopilot computer as part of an autopilot system. Max boat size (kg) Stroke (mm) Hard over time (seconds)

000-13902-001

T0 12V 000-13902-001

9,000

200

12

T1 12V RAM-T1-12V

12,000

250

13

T2 12V RAM-T2-12V

20,000

250

9

T2 24V RAM-T2-24V

20,000

250

9

T3 12V 000-13788-001

36,000

300

13

RF25N RUDDER FEEDBACK UNIT

The RF25N Rudder Feedback Unit with transmission link and five metre NMEA 2000 ® Micro-C cable, is typically used on boats with inboard engines, on larger vessels, and in special applications where Virtual Rudder Feedback may not be suitable. The RF25N connects directly to a boat’s NMEA 2000 ® network, simplifying the cabling required for installation. It can be horizontally, vertically or upside-down mounted.

000-10756-001 Feedback Unit

PRECISION™ 9 COMPASS

The Precision-9 Compass from Navico provides accurate heading, rate-of-turn, pitch and roll data to equipment connected over an industry-standard NMEA 2000 ® network. It is an ideal source of heading and motion data for B&G autopilots, radar systems, multifunction displays, and other systems.

PRECISION-9 Compass 000-12607-001

WR10 AUTOPILOT REMOTE

Wirelessly control your autopilot from anywhere on-board with this Bluetooth ® Wireless Pilot Controller. Worn on the wrist or a lanyard, the WR10 works with H5000 and Triton™ 2 Pilot systems, up to 30m from the waterproof base station.

WR10 Wireless Autopilot Remote 000-12316-001

visit aquafax.co.uk for full product details

16