ECP Tool Catalogue

STEERING AND SUSPENSION MOT Suspension Inspection Tool

Steering Rack Knuckle Tool ⊲⊲ Fast and easy removal and installation of the steering knuckle ⊲⊲ Fit over the steering shaft onto the steering rack ⊲⊲ Fits racks with hex drive, two flats and round ends with a diameter of 35-42mm

⊲⊲ This tool tests for movement and wear in suspension components such as ball joints, bearings and bushes. ⊲⊲ Lower the road wheel on the roller bar using a breaker bar to rock the road wheel to highlight any movement. ⊲⊲ Ideal for use on a 4 post MOT ramp

538 77 4040 £34 .99

538 77 6061 £24 .99

Coil Spring Compressor (Wishbone Suspension) ⊲⊲ For wishbone, independent and multi-link suspension systems ⊲⊲ Restricted access: Suitable for springs where the lower wish bone access hole is 30mm or bigger (tool shaft size 29mm). Maximum load 3800kgf (37,240N) ⊲⊲ Suitable for use with air impact tools when using the torque limiting bar provided.

⊲⊲ Also complete with two forged steel pressure plates 150mm & 130mm, Manufactured from steel and Chrome Molybdenum ⊲⊲ Access problems mean that often a traditional coil spring compressor cannot be used on some applications. However, if access is possible from the bottom of the spring, then the dimensions of this new coil spring compressor from Laser Tools (part no: 5931) will allow fitment through lower wishbone holes as small as 30mm in diameter. ⊲⊲ To be used when the spring is fitted independently of the suspension damper (wishbone, independent and multi-link systems), the vehicle applications include Chrysler, Citroën, Ford, Honda, Kia, Mercedes Benz, Mitsubishi, Peugeot, Renault, Seat, Skoda, Suzuki, Toyota, Volvo, VW, BMW 3 series (1996-2013) Mercedes Benz W202/W204 (1997-2013). ⊲⊲ A major timesaver is the fact that the compressor is suitable for use with air impact tools when using the torque limiting bar provided in the set.

538 77 6381 £119 .99

112