ROI Bodyshop Solution Catalogue Winter-Spring 2023

Panel Shop

Miracle System Standard Kit LAS92170

Aluminium MIG & Panel Repair System LAS92545 Aluminium work station incorporating an aluminium MIG welder combined with the revolutionary aluminium panel repair system, all housed on a mobile trolley. • Aluminium repair station includes 200A aluminium MIG welder and aluminium repair welder, complete with trolley • MIG can be set up as aluminium, steel or MIG braze • Welds on aluminium washers • Revolutionary aluminium pin puller.

Miracle System Standard Kit Deluxe LAS92116 This Deluxe kit takes the Miracle System Standard Kit and upgrades the welder to the Power-TEC EvoTwinWelder. All housed on the larger Miracle Platinum tool trolley. • Miracle System Standard Kit with the welder upgraded to the EvoTwin and the PlatinumTool Trolley • EvoTwin MiracleWelder allows for the use of easy puller & washer/bit welder at the same time, without changing cables • The larger Platinum tool trolley provides more room for the larger welder, together with a bigger work area & more room to store pullers, accessories & consumables • Full training manual & DVD included. A state of the art panel repair system that offers profitable, high quality, fast turnaround panel repair. Speed up the repair process, while increasing the element of labour within each repair job and reduce the need for panel replacement. This standard kit is supplied with slim trolley, assembled to incorporate the necessary equipment to hold the Evo Miracle Welder and standard easy puller. • Standard kit comes complete with slim trolley, EvoWelder, electrode and shroud, standard easy puller, carbon stick, Hicon grease, shrink tip and cable with clamp, plus an 800mm line puller, slide hammer, pulling shaft set and consumables • Line puller is ideal to rough out damage on cosmetic panel repairing panel lines to their original shape • The 1.5kg slide hammer features a M14 thread to fit accessories including a 3 point electrode holder. € 3,680 .00

Supplied with: • 2kg roll of Aluminium MIGWire

• Pack of 50 Miracle Special Alumi Bits • Pack of 50 Alumax Special Pull Pins.

€ 4,025 .00

Miracle System Strong Kit LAS92172 This strong kit takes the standard kit and upgrades it to include the strong puller, slide hammer, pulling shaft set and consumables. • This kit has been designed for the more robust pulling requirements • Miracle System Standard Kit with the upgrade to the strong puller, slide hammer, pulling shaft set and consumables • Strong puller ideal for carrying out repairs on damage to semi-structural parts of the vehicle • The 1.5kg slide hammer features a M14 thread to fit accessories such as 3 point electrode holder, Pullrite panel puller and stud nail adaptor to carry out panel repairs • Full training manual and DVD included.

€ 4,198 .00

€ 3,853 .00

Nitrogen Plastic Welder with Generator LAS92452 Plastic welder with its own Nitrogen generator, that eliminates the need for a nitrogen gas bottle. Workshop compressed air is used to maintain consistent temperature between welds — the nitrogen is only activated when pulling the trigger so that it’s not wasted between welds. Makes repairs that are stronger than any two-part epoxy or hot air weld. The plastics are melted together, with no oxidation, to form the strongest possible weld.

Nitrogen Plastic Welder with Generator/Stapler LAS92229 Plastic welder featuring a Nitrogen generator, that eliminates the need for a nitrogen gas bottle. Workshop compressed air is used to maintain consistent temperature between welds — the nitrogen is only activated when pulling the trigger so that it’s not wasted between welds. This model also comes supplied with an integrated hot stapler, snap off staples, corner plastic, plastic smoother and gauge. Together with a set of plastic consumables, scraper and roller to finalise the repair.

• Compatible with almost every plastic type used in the automotive industry • Has it’s own nitrogen generator which eliminates the need for a gas bottle • Allows the welding of filler material by heating with nitrogen • The welder comes complete with a set of plastic consumables including a scraper & roller to finalise the repair • Heats plastic without combustion & therefore without emitting fumes: 230v, 50Hz, 1600w, 20-650°C • Made in Italy. € 3,680 .00

• Compatible with almost every type of plastic used in the automotive industry. • Has it’s own nitrogen generator which eliminates the need for a gas bottle. • Allows the welding of filler material • Heats plastic without combustion and therefore without emitting fumes; 230v, 50Hz, 1600w and 20-650°C • Made in Italy. € 3,853 .00

Price, availability and specification may change without prior notice. Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded. Order parts online, head to www.omnipart.com. Offers valid until 30th April 2023 Prices correct at time of going to press: January 2023.

10

Call your local branch | Branches nationwide

omnipart.eurocarparts.com