ROI Garage Gear Q3 2024

Garage Gear Trade only Workshop Solutions Q3 Offers Take advantage of our latest offers Republic of Ireland Only

Introducing AllData See page 3

Peak AC season – we are here to support See page 4

Exclusive to LKQ Euro Car Parts See pages 6 - 8

NEW

Prices in this catalogue are subject to change and subject to stock availability. Branches nationwide

autoclimate TM

Diagnostics

Trade in your old diagnostic tool When you buy an MS906SPro/TSC, MS909, MS919 or Ultra Receive an extra 1 year updates for free* Only in July - August - September 2024

Autel MaxiSys Ultra 35599812P • Built in oscilloscope and multimeter • Built in waveform generator • Built in CAN bus check • Programming • Docking station • Doip enabled.

Autel MaxiSys 919 355998130 • Built in oscilloscope and multimeter • Built in waveform generator • Built in CAN bus check

2 YEAR WARRANTY 3 YEAR SUPPORT & UPDATES ALL NEW SOFTWARE

2 YEAR WARRANTY 1 YEAR SUPPORT & UPDATES

• Programming • Doip enabled.

€ 6,049 .00

€ 4,675 .00

Autel MaxiSys 909 355998160

Autel MaxiSys 906 Pro 355991270 • 8’’ touchscreen • Bluetooth VCI • DOIP+CAN FD compatible • 80+ Manufacturers • ADAS System Identification • ADAS Upgrade Compatible (IA600).

2 YEAR WARRANTY 2 YEAR SUPPORT & UPDATES

2 YEAR WARRANTY 2 YEAR SUPPORT & UPDATES

• MaxiFLASH VCI • Programming • All new software • DoIP enabled.

€ 1,985 .00

€ 3,499 .00

Summary of Terms and Conditions: 1. Eligible Models to trade-in: MS906 range, MS908 range, Elite or equivalent model value from other brand. The diagnostic tool to be traded in must have cost more than €1,000 when orginaly purchased – Grey imported, copied and cloned tools excluded. 2. Eligible Autel tools the End User must purchase: The promotion can only apply where the End User purchases a MS906sPro, MS906SProTSC, MS909, MS919 or MS Ultra 3. If customer wants to trade in an Autel tool, then the Autel tool must be older than 3 year (registration date earlier than 2020.12.31).

† Finance example typically based on a 5 year lease purchase agreement. Finance subject to status, full terms and conditions available on request. Other finance options available. All prices exclude VAT. Price, availability and specification may change without prior notice. Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded. Order parts online, head to www.omnipart.com. Offers valid until 30th September 2024. Prices correct at time of going to press: July 2024.

Call your local branch | Branches nationwide

2

omnipart.eurocarparts.com

Diagnostics

Technical Helpline Got a technical question? Unsure about how to repair a fault?

Over half a million fault resolutions at your fingertips

What do you get access to?

12 month subscription from only €115 per month

Contact your Account Manager for more information or scan the QR code to sign up now!

Repair manuals

Component locations

Technical information

Circuit diagrams

Real OEM portals

General troubleshooting and repairs

Master technicians at the end of the phone

Parts catalogues

Diagnostic assistance

Automotive Technology Designed by Technicians + 37 Brands Covered + 85m Technical Documents + 7mWiring Diagrams. NEW

Original OEM Data for Service Maintenance & Bodyshop Repairers

Manufacturer repair information for SMR and Bodyshops in a reliable online source: + Wiring diagrams and electronic systems + Timing belt replacement diagrams and instructions + Body and frame information + Diagnostic trouble codes and TSB’s + Maintenance intervals and service schedules + Tyre pressure monitoring systems + Filling quantities and tightening specs + ADAS and collision avoidance + EV Power down procedure.

From €131 per month

† Finance example typically based on a 5 year lease purchase agreement. Finance subject to status, full terms and conditions available on request. Other finance options available. All prices exclude VAT. Price, availability and specification may change without prior notice. Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded. Order parts online, head to www.omnipart.com. Offers valid until 30th September 2024. Prices correct at time of going to press: July 2024.

3 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Air Conditioning

Exclusive to LKQ Euro Car Parts

Tektino All-in-One Aircon, Flushing and Oil Removal Machine 251770500 R134A MODEL 251770550 1234YF MODEL

New to range

3

R134a 1234yf

7" TFT

3 m

30 Ltr

With printer

Why buy me?

Flushing This Tektino machine will automatically flush a vehicles A/C system, removing all oil and contaminants as part of an automatic cycle. This ensures the correct quantity of oil is added and that the machine performs as it’s supposed to. Cost saving Unlike other A/C machines, you aren’t required to purchase expensive bolt on flushing or adaptor kits saving you €€€s.

Ease of use Simple to follow step by step instructions on a touchscreen display, guiding users through every stage of the process. Database The machine is equipped with an information database of oil and gas quantities for over 3000 vehicles.

Specification:

AC220V±10%~50/60Hz

Input power

3/8HP

Compressor power

7’’ touch screen

Display

0.25kg/min. Patent pending SRR (Supreme Recovery Rate) system ensures 99% recovery rate

Max. refrigerant recovery speed

120Ltr/min

Vacuum pump capacity Evacuation time selection

2-60min

250ml capacity, PAG/POE/UV 400ml capacity

New oil vessel

Used oil vessel

Max. 2kg/min, liquid charging

Refrigerant charging speed

600ml capacity, for recovering totally 100kg refrigerant

High capacity spin-on filter-drier Accuracy of refrigerant cylinder load cell Refrigerant cylinder Machine maximum working pressure

±10g

10kg, with heater band

20bar with electronic high pressure protection warning and safety release valve

High side -1bar~30bar, Low side -1bar~16bar

Gauges

Vehicle A/C database Thermal printer Package

830*700*1360mm; Unpacked

Now Only € 3,549 .00

† Finance example typically based on a 5 year lease purchase agreement. Finance subject to status, full terms and conditions available on request. Other finance options available. All prices exclude VAT. Price, availability and specification may change without prior notice. Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded. Order parts online, head to www.omnipart.com. Offers valid until 30th September 2024. Prices correct at time of going to press: July 2024.

Call your local branch | Branches nationwide

4

omnipart.eurocarparts.com

Autoclimate Nationwide Service Support Autoclimate Nationwide Service Support

autoclimate TM

We have nationwide coverage of fully qualified air conditioning engineers, who provide on-site maintenance. All engineers carry stock of the most likely replacement parts, so you can be assured that we aim to repair machines first call.

• Full UK coverage • Rapid response time

• All work controlled by hand-held tablets • All engineers hold the latest refrigerant handling qualification (C&G 7543-001)

• Engineers fully trained to work to manufacturer standards • Engineers receive regular updates on latest products and safety standards

• Work is carried out with full compliance to legislative standards • Calibration certificates available on request, e.g. to comply with ISO Quality Management and PAS125 system audits. technicalservices@autoclimate.com Servicing Your Air Conditioning Machine Brings benefits at every stage of operation:

Refrigerant Recovery The performance of the internal compressor is checked to ensure fast recovery, efficient operation and component reliability. Refrigerant Recharging Charging accuracy is re-calibrated (to +/- 25gms), using a certified calibration weight, so your customer’s air con systems are always charged correctly (for optimum system performance)

Refrigerant Recycling

Refrigerant Leakage Additional checks during the service procedure ensure there is no refrigerant leakage at any stage of the machine’s operation. Refrigerant loss to atmosphere is prosecutable under the Environmental Protection Act (1990). Quality Management Servicing of garage equipment may be required to comply with the terms of some ISO Quality Management Systems e.g. PAS125.

PUWER 1998 Provision and Use of Workshop Equipment Regulation 1998 confers a duty to ensure all equipment provided by your business is well maintained and safe to use.

The machine filter is changed to ensure the recycled refrigerant meets the applicable S.A.E. standard (J2099) System Evacuation Vacuum pump performance and operation is checked, the oil is changed to ensure the machine is able to rapidly achieve a deep vacuum to fully de-hydrate the vehicles A/C system and help prevent internal corrosion.

† Finance example typically based on a 5 year lease purchase agreement. Finance subject to status, full terms and conditions available on request. Other finance options available. All prices exclude VAT. Price, availability and specification may change without prior notice. Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded. Order parts online, head to www.omnipart.com. Offers valid until 30th September 2024. Prices correct at time of going to press: July 2024.

5 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Workshop Equipment | Car Lifts

Steadmann SM4000B 2 Post 4 Ton Lift Baseless 577010270

• Door protection • Top mounted power pack

€ 2,895 .00 • 4000kg lifting capacity • Electric lock release, lifting and lowering • Screw pad extensions • 4 pc extension kit included

• 2 x 3 stage arms • 2 x 2 stage arms.

Steadmann SM4000L 2 Post 4 Ton Lift 577010280

• 4 pc extension kit included • Door protection • Top mounted power pack

• 4000kg lifting capacity • Clearfloor • Low profile arms • Electric lock release, lifting and lowering • Screw pad extensions € 3,295 .00

• 2 x 3 stage arms • 2 x 2 stage arms.

Steadman SM3200XL 3.2 Ton Scissor Lift Full-Rise 581772520

• 3200kg lifting capacity • Dual Hydraulic safety system • Electronic lifting and lowering controls • XL lockable ramps 2200mm length platforms • Ultra low 110mm profile • EZsync system • Dual pressure seal cylinders.

€ 5,395 .00

Steadman SM6550XL 4 Post Alignment/ Service Lift 578775310

• Car and LWB van wheel alignment lift • 2 x 3000kg air operated jacking beams • 6000kg capacity lift • Extra long platforms 5500mm.

€ 9,895 .00

* Prices subject to additional transport surcharge – Call for details.

† Finance example typically based on a 5 year lease purchase agreement. Finance subject to status, full terms and conditions available on request. Other finance options available. All prices exclude VAT. Price, availability and specification may change without prior notice. Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded. Order parts online, head to www.omnipart.com. Offers valid until 30th September 2024. Prices correct at time of going to press: July 2024.

Call your local branch | Branches nationwide

6

omnipart.eurocarparts.com

Data and Technical Support Workshop Equipment | Wheel and Tyre

Steadman SM24RFIT Tilt Back Tyre Changer 583771751 • Outside clamp: 10”-20” • Outside camp: 12”-24” • Inside clamp: 13”-23” • Max. wheel diameter: 1120mm • Wheel width: 3”-13” • Pressing force: 2800kg

Steadman SM200AT Wheel Balancer 584770130 • Rim diameter: 10”-24” Max. • Wheel weight: 70kg Max. • Wheel diameter: 1000mm • Rim width: 1.5”-20” • Motor power: 0.25kw • Precision: +/-1g • Power supply: 100/230V 1ph • RPM: 200 • Balancing time: 10s • Second time mounting test: <5g. € 1,895 .00

• Working pressure: 8~10bar • Voltage: 110V/220V/380V • RPM: 6.5/13. € 2,995 .00

Ravaglioli G2.140R Automatic Wheel Balancer 584770120

Ravaglioli G5440.22 + Plus 73 Heavy Duty Automatic Tyre Changer 583771670 • Suitable for rims between 10” and 22” • Tilting vertical arm • Complete 3 arm alloy assist arm • Heavy duty 3000kg force bead breaker • Operating arm with pneumatic locking

• Automatic distance and diameter measurement • Auto rotate and stop at imbalance points • Auto start / stop • Auto Alus programme • Guided rim / tyre optimisation process • Hidden weight program • 19” monitor display • Single phase.

€ 3,595 .00

• Air operated bead beaker • Extractable pedal unit for easy servicing • Single phase. € 4,695 .00

Optional integrated blast tank & pedal inflation also available

Save Over €1,000 € 7,090 .00 Package Price

Plus 73 Helper

Ravaglioli Tyre Package G5440.22 + Plus 73 and G2.140R 285770430

† Finance example typically based on a 5 year lease purchase agreement. Finance subject to status, full terms and conditions available on request. Other finance options available. All prices exclude VAT. Price, availability and specification may change without prior notice. Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded. Order parts online, head to www.omnipart.com. Offers valid until 30th September 2024. Prices correct at time of going to press: July 2024.

7 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Workshop Equipment | 3D Wheel Alignment

Hunter PA200 Lite CCDWheel Aligner 587772450

The PA200 LITE is a conventional towerless based system. It combines Hunters DSP700 wireless alignment sensors, sturdy self-centring clamps with powerful software; this provides accurate 14-point live alignment readings quickly. Results are displayed instantly, given to the customer in graphical or technical Hunter printouts to help you sell more alignments. Access to HunterNet gives workshops the ability to be connected easily, with results and reports at your fingertips. Suitable for use in independent garages, tyre retailers, small franchise dealerships and bodyshops. The system uses Hunter’s DSP706 measuring heads which utilise integrated microprocessors to measure alignment angles. Unlike other conventional sensor systems, the PA200 Lite allows technicians to carry out a short rolling compensation rather than a more traditional, and much slower, jacking compensation method. The PA200 Lite will allow your business to offer premium Hunter wheel alignment servicing at an economical price, boosting both revenue and customer retention.

€ 11,795 .00

Techno Vector 7 2 Camera 3D Aligner with LED Lights and Actuator 587772310

3 YEAR WARRANTY

Unique WideScope technology. • Perform measurement at a wide range of lift heights* without repositioning cameras • A more compact installation without any loss of accuracy • Significantly decreases the time it takes to perform an alignment. TechnoVector 3D wheel aligners are designed to take measurements to enable adjustments on steerable and unsteerable axles of cars and can be installed in any workshop or tyre shop. The wheel aligner performs measurements by observing high precision image targets, that are placed on the vehicle. It calculates their precise positions in 3D space and using simple procedures, such as compensation and measurement, calculating all the wheel alignment angles.

Number of cameras Type of cameras Type of mounting Computer cabinet

2 video cameras

Industrial optical RAW cameras

Floor-mount. T-pillar

V-cabinet

Applicability

Pit

Distance from cameras to the centre of front turn tables 1400-2500mm

€ 13,695 .00

* Dependent on the installation distance.

Prices in this catalogue are subject to change and subject to stock availability. Branches nationwide

autoclimate TM