Test File BN

First page 1 Next page Last page

Bodyshop Equipment Trade only 1 st September 2024 – 28 th February 2025

1. Open new revenue streams with Intelligent Repair

2 3 4 6 8

Pre-Inspection

Preparation

Plasma Cutters / Induction Heaters

Dent Pullers

Spot Welders / Welders

10 11 12 13

Pulling Towers

See page 40-45

Riveters

2.Optimise Your Processes

Plastic Repair

Anti Static / Weld Fume Protection

Take a look at different paint curing options

“ Repair, don’t replace” with plastic welding

Spray Gun Cleaning / Paint Mixing Room Heater 14 Recycling 15 Spray Guns 16 Finishing Tools 17 UV Paint Curing 18 I.R. Paint Curing 19 Karcher Cleaning 20 Milwaukee Power Tools 24 Air Tools 24 Kielder Power Tools 26 Compac Workshop Equipment 27 Air Conditioning 28 Garage Equipment 30 Car Lifts 32 Compressors 33 Wheel and Tyre 34 Diagnostics 36 Intelligent Repair – PDR 40 Wheel Refurb 42 Mobile Repair 44 Alignment 46 ADAS 48

See page 18-19

See page 12

3. Invest in cost saving equipment with our sustainability range

See page 15

Prices in this catalogue are subject to change and subject to stock availability. Branches nationwide

autoclimate TM

Pre-Inspection

Lighting

Scangrip Sunmatch 4 Colour Match/ Inspection Lamp 597995330

Scangrip Multimatch R Colour Match/ Inspection Lamp 274770359

3 YEAR WARRANTY WARM COLD

3 YEAR WARRANTY

2500K

6500K

ALL DAYLIGHT – 5 STEP

• Rechargeable colour matching/inspection light • 4th generation • New CCT scan function • 500 lumen • Inspection spotlight.

• Handy and powerful work light for inspection and detailing providing up to 1200 lumen • MULTIMATCH R features

WARM COLD

2500K

6500K

ALL DAYLIGHT – 5 STEP

CCT SCAN – STEPLESS

the outstanding ALL DAYLIGHT function, providing you with the option to choose

between 5 different colour temperatures depending on the job • The lamp is easy to carry and is ergonomically designed for a good grip on the handle.

CCT SCAN – STEPLESS

€ 141 .00

€ 135 .00

Scangrip Colourmatch Detail Kit Ultimate 281775041

Scangrip Bonnet C+R Detailing Lamp 274770320 • Line Light providing extremely powerful illumination

3 YEAR WARRANTY

The ULTIMATE kit is your go-to-kit for effective detailing and colour matching. The Ultimate kit includes: • Matchpen R • I-Match 2

Under bonnet, Interior

• 1400 lumen of a vehicle interior or recessed area • Supplied with an adjustable telescopic holder with soft padded hook ends providing a firm and scratch-free grip • Detach the power cable and use as an inspection light.

• Sunmatch 3 • Multimatch 3 • The bag.

€ 442 .00

€ 171 .00

† Finance example typically based on a 5 year lease purchase agreement. Finance subject to status, full terms and conditions available on request. Other finance options available. All prices exclude VAT. Price, availability and specification may change without prior notice. Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded. Order parts online, head to www.omnipart.com. Offers valid 1st September 2024 – 28th February 2025. Prices correct at time of going to press: August 2024.

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Preparation

Aluminium Dust Extractor 597995310

9 Piece Sanding Block Kit With Case STR.SANDBLOCKKIT

• Designed for aluminium repairs • Suitable with all types of pneumatic commercial sanders • ATEX Rated Category 3 Group II • Supplied with earth lead to dust bag and 5m hose.

Call for a quote

Professional Spraygun Cleaning Kit 21 Piece STR.SCK-22

€ 1,269 .00 Large Rotating Panel Stand STR.EUROSTAND

Call for a quote

Panel Stand STR.PANELSTAND25

Wheelmaster Holds Four Wheel for Repair STR.WHEELMASTER

Call for a quote

Multifunction Paint Stand STR.MULTIPAINTSTAND

Floor Bumper Stand STR.FLOORBUMPERSTAND

Call for a quote

3 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Dismantling

Plasma Cutters

GYS Easycut K35 Plasma Cutter With built in compressor 597998370

Telwin 54XT Plasma Cutter With built in compressor 597993460

GYS Easycut 40 Plasma Cutter With Consumables Pack 597772931

• Clean cut steel 15mm – aluminium 12mm • Max cut steel 20mm – aluminium 15mm • Comes with free consumable pack • Supplied with 4m torch and 2m earth clamp • 240v – 13amp supply.

• 100% Autonomous – The built-in compressor means the unit is easily incorporated into any workplace. • Ultra Precise & Versatile – Cuts steel, stainless steel, aluminium and copper up to 15 mm thick. • Maintenance-Free – Filters air and automatically purges excess moisture to extend the life of consumables. • Mobile & Robust – Integrated storage compartment, pads on all sides and reinforced casing. • PFC Technology – Allows the machine to be connected to a long extension lead (100 m). Supplied with Trolley.

Inverter, compressed air plasma cutting system, with contact striking of pilot arc. Allows a rapid, distortion-proof cutting of all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass, etc. The model is equipped with a compressor and needs not to be connected to an external compressed air power source. Complete with PK torch.

Cut all types of metal easily and with precision

€ 825 .00

€ 1,885 .00

€ 1,235 .00

GYSDuction Proliner 597771240 Induction Heaters Ideal package for car body repair, supplied with accessories to carry out the full range of tasks. • Body Inductor – easily remove adhesive and strips, side mouldings etc. • Glass Inductor – peel off welded metal sheets, burn off stoneguard protection with the scraper. • Bolt Inductor – release mechanical parts. • Dent Pulling inductor – repair small dents. • Spiral Inductor – release mechanical parts.

GYS Powerduction 37LG Supplied with Coolant 597773141

Regular use in busy shops

• Fast direct heat to the heat of the metal • Liquid cooled for regular use within the workshop • Heats M10 bolt in 1 second • High power 3700W – from a 240V 13A plug • Suitable for heating steel, aluminium, copper. € 2,949 .00

GYS Powerduction 37LG With Trolley 597993180 Supplied with alloy wheel inductor head free (worth €205)

€ 2,349 .00

€ 3,535 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Dismantling

Induction Heaters

GYS Powerduction 10R 590777030 • Lightweight but robust induction heater for everyday use • Just 3.5 kg – no need for a trolley • Quick and easy to use – select and install the inductor, connect, and you're ready to go • 1200W output power with high duty cycle – will stand up to daily use in the workshop • Supplied with 5 inductors.

Telwin Smart Inductor 5000 Deluxe Package 597775841

Occasional use in smaller shops

• Intelligent solution for speeding up and simplifying the removal of glued (windows, rear windows, plastic parts, stickers, glass roofs, interior and exterior trims, etc.) or blocked (bolts, bearings, gears, etc.) parts from vehicles as well as for repairing hail dent • It adjusts its intensity in an intelligent and completely automatic manner (Smart Power) using an innovative AutoCheck microprocessor system.

Safe alternative to heating with a naked flame Releases seized bolts, glow plugs, steering joints, etc

Heats up A M10 bolt in 10 seconds!

€ 649 .00

€ 2,525 .00

Stanner i4-S Induction Heater With Trolley 597993150

GYS Powerducton 39LG With Trolley 590779590

High quality portable induction heater for heating of seized parts on vehicles of all sizes. • Works on all steels, aluminium and copper • Easy controls allow power control from 5 – 100%, from a 240V 13A plug • Non contact heat source, heating only the required area protecting surrounding areas and/or parts • Water cooled to give excellent duty cycle.

• Larger 7 litre coolant tank for regular use within a workshop, fast fit centre or body shop • Wide frequency range makes it ideal for heating both thin and thicker material • High power 3700W – from a 240v 13A plug • Suitable for heating steel, aluminium, copper.

Constant use large shops

€ 3,535 .00

€ 4,125 .00

5 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop Dent Pullers Electro Power 5T Hand-held Push-Pull Body Repair Kit 278770560

Telwin Battery Puller 278770310

Steel

Suitable for all steel panels and freed from tethering to a power cable, the Telwin Battery Puller is the new standard for efficiency.

• The Electro Power battery operated push-pull tool provides the most convenient metal auto body re alignment capabilities with the push of a button. • A total deployment of 5 Tons of power can be used inside and outside the vehicle to align car body structures easily with one hand. • No cumbersome cords, hoses, or hand pumps are needed to complicate its use.

• Delivers the power of a traditional puller (2800A) but weighs only 2,3kg. € 1,179 .00

Spare Battery 281775033

€ 2,355 .00

€ 295 .00

Telwin Steel & Aluminium

Stanners Advanced Body Repair Package with Combi Unit 278770150

Steel Aluminium

Full Kit 597779070

Aluminium Stud Pull welds small aluminium studs onto damaged panels, enabling dent removal with a pulling bridge. Dent Expert PRO is ideal for steel panel repairs. The Advanced Car Body Repair System handles all dent repairs, including large commercial vehicle repairs. It includes all accessories and consumables on a purpose-built trolley.

Complete workshop system for repairing aluminium and steel. With purpose-built multi-functional trolley. Accessories included: • Multilever Kit • Compact Puller • Traction Bar • 8 Pin Multihook • 6 Pin Multihook • Minpuller Pull system

With on-site set-up and operator training

€ 4,889 .00

€ 4,475 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop Dent Pullers

GYS Proliner Arcpull 200 Package 278770290

GYSpot 26.02 Power Source Only 597771110

Aluminium

Steel

Ideal for pulling and straightening low-thickness panels (bonnet, door, roof panel etc.) • Multifunctional with 3 modes (stars and washers, wavy wire, contact shrinking) • Easy to use and intuitive • Supplied with slide hammer.

Advanced technology offering unparalleled aluminium dent pulling capabilities. • Easy to use digital interface • Synergic and manual settings keep you in full control • Complete kit • 240V single phase.

GYS Easyliner 39.02 Kit Plus 278770330 Complete steel dent pulling kit for repairing small, medium and big dents. • Remove dents without disassembling • Repair without replacing • Reduce down-time • Improve your profitability. € 4,549 .00

€ 499 .00

Telwin Mini Steel Dent System 278770610

Steel

Complete basic kit for steel dent pulling.

Supplied with: • Multilever kit

• Pulling Lever Kit • Compact Puller • Box of steel dent pulling consumables • Trolley.

€ 1,979 .00

€ 1,599 .00

7 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop Spot Welders Tecna Inverter Cable Spot Welding Station 277771410

Premium Spot Vision 277771540

5 YEAR WARRANTY

• Fully automatic multifunction spot welder • Latest generation premium capability welder with complete software package for worry free automotive repair

14000A output Spot Welder with silenced water cooled transformer. Comes with all major manufacturer approvals. • Runs on Tecna Smart Plus software for fully automatic welding, data is downloadable via USB • Precision welding gun support is achieved with a balancer system for zero gravity operation • The Easy Change system makes swapping welding arms very quick and easy • Supplied with C-Type Fast Gun. Single side gun and arms kits

available as optional extras, ask for details.

• Particularly suitable for welding high maximum strength, and coated and laminated steel panels • Will handle all your spot welding requirements, delivering reproducible welding quality • Available with X-gun or C-gun • Holds Tesla manufacturer approval.

€ 12,975 .00

€ 17,669 .00

Welders

Telwin Inverspotter 14000 277770940 Medium frequency, direct current (MFDC) inverter technology, microprocessor controlled resistance welding machine. High Specification and easy-to-use interface with understandable graphics for the perfect weld. Select Auto, Easy or Pro Modes as desired. Plus, benefit from the innovative Mercedes Approved Smart Auto-set feature that automatically optimises welding settings based on material and thickness.

€ 11,489 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Telwin 223 Treo Inverter Mig 597778340 Microprocessor controlled MIG MAG/FLUX/BRAZING/MMA/TIG DC-Lift inverter multiprocess welding machine. It is particularly suitable for use in body shops and allows the immediate use of three different torch types: two traditional mig torches and one spool gun. This feature enables the user to work directly on different materials without any need to change the torch or the wire spool and this confirms Technomig 223 Treo to be the unique solution for any repair or maintenance needs. The traditional mig torches are suitable for welding steel, HSS high strength steels, stainless steel and mig-brazing of galvanized sheets, while the spool gun torch is specific for aluminium welding even when working far away from the generator. Panel Shop Welders

Stanners 3TI Expert MIG Welder 3Ph 277771610

Triple torch setup – no need to switch torches or liners! • Latest 250AMP Synergic Unit

• 10 Voltage Settings • Inverter power source

• Automatic wire speed regulation to fine tune the welding process • Holds 2 gas bottles to the back of the unit (Pure Argon for Brass & Aluminium, and Argo shield for Steel Mig) therefore there is no requirement to swap gas bottles • An Aluminium Spool Gun allows the thinnest of materials to be welded e.g. Splits on wings • Can be set up for : Steel, Brass & Aluminium • Has inverter technology

at its core making it more energy efficient complying with new EU regulations.

€ 3,059 .00

€ 3,699 .00

Weldstar Infinium Multiprocess Inverter 277771380

5 YEAR WARRANTY

Trolley for Infinium Welder 281770641

4-in-1 Multiprocess Welder (MIG/ MAG Synergic, MIG/MAG Pulse, MIG/MAG Standard, TIG AC/DC (HF/Lift), MMA AC/DC, MMA AC/ DC Pulse) with user friendly 5” LCD interface. • Automatically detects input voltage 110V or 230V (PFC technology) • Easy to set up different welding modes, with auto-detection capabilities e.g. weld material thickness ensuring optimal performance save up to 10 stored programmes • Smart fan – reduces power consumption and intake of dust and fumes • Supplied with MIG Torch, TIG Torch, Regulator. 2-wheel Trolley available as optional extra.

€ 220 .00

€ 1,699 .00

9 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop

Pulling Towers

Excalibur XL Tower Puller 278770550

Airfix Tower Puller 278770460 • An indespenisble asset for dent repair work • Using compressed air, the design features a non glued recessed seal that can be changed very easily.

Excalibur Tower Puller 278770430

• A chain pull system for body shop repairs that thanks to its pneumatic vacuum system anchors to the ground without the need for fixings • Under the support base there is a special seal rubber that adheres to any type of floor allowing tractions up to 2,500kg and an operating pressure from 4 bar up • It is the ideal solution for spot repair interventions for bodybuilders who need to carry out rapid interventions on all types of panelling from the car sill to the uprights, from the doors to the wheel arches, etc. In short to all those who want to reduce repair times and thus avoid the delivery of courtesy vehicles. Ask for Demo

In addition, 4 pads in the vacuum prevent the seal from slipping

• Pulling capacity 350Kg • Angled gear facilitates downward pulling • Easy pull-height adjustment.

€ 1,349 .00

€ 1,535 .00

€ 1,999 .00

Pulling Tower LAS92657

Pole Exension LAS92659

A steel extension pole, which adds an additional 700mm with 7 adjustable height positions and allows the tower to be used on truck and van roof panel repairs.

A fast, easy to install pulling tower with a height adjustable mechanical hoist (extension pole available to raise height for commercial vehicles 92659).

€ 348 .54

Ideal for use on steel and aluminium panel repair.

Vertical Pull Kit LAS92660

An additional anchoring plate / suction pad to allow for the tower to be used in a vertical position such as pulling down on damaged floor pans or sills.

€ 1,299 .00

€ 449 .79

Pulling Tower Set LAS92664

A fast, easy to install pulling tower with a height adjustable mechanical hoist (extension pole available to raise height for commercial vehicles 92659). Ideal for use on steel and aluminium panel repair. Designed to reach a pulling traction force up to 550kg, it is counterbalanced by an anchoring plate / suction pad, which features a vulcanised rubber pad and is held onto the ground using the workshop air supply, allowing it to be used anywhere on the workshop floor without the need to drill in any anchor points or fixings. It is supplied with a claw hook for use with weld on squiggly wire, Miracle System bits, glue pads, weld-on tack and pull plates and various other applications.

Kit includes: • Pulling tower • Gluematic glue gun • Olvent spray for hotmelt glue • Glue sticks (15 pc.) • Rainbow Pack of Multipads (4 pc.).

€ 1,399 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop

Riveters

Prospot PR8 Battery Operated Riveter 277770910 • Jaguar Land Rover approved • Set EXACT FORCE within the tool’s 20-80kN range • Data logging captures proof of quality work • Set warning tones to alert of incorrect rivet set • Supplied with standard die kit, other dies available.

Applications: • Self Piercing Rivets (SPR) • Flow Form Rivets (FFR) • Break-Stem Fastener (BSF) • Threaded Nut Rivets (TNR).

€ 7,649 .00

DSR880 Multi-Function Riveter 277770950

The Questok DSR880 is a powerful digitally-controlled Self Piercing Rivet Gun offering 80kN force. This tool comes complete in a durable molded carry case, along with two 4.0ah 18v batteries, a charger, and a die kit, enabling the removal and insertion of standard self-piercing rivets. Additionally, adapters for flow form rivets are included. It is an ideal tool for aluminum car repair, with a smart chip managing the riveting process and a high-precision pressure sensor (with a tolerance of 1-2%) for accurate, consistent force output. The LCD digital display and pressure monitor make for exact pressure readings, and ensure that automotive repairs meet manufacturers’ exacting standards.

€ 3,769 .00

11 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop

Plastic Repair

Stanners Plastic Fusion System 274770168

Mixplast Staple and Weld kit 597779510

Ideal for repairing broken plastic parts, from splits in bumpers, broken tabs and mounting brackets, cracked motorcycle fairings and much more!

With 2 torches, one for inserting hot staples for rebuilding and reinforcing broken plastic as well as a hot iron for melting larger cracks – the other torch for melting filler plastic to the cracked workpiece.

Repair vehicle plastics and trim with ease and precision. Handheld inverter that gives instant heat and fast cooling of the staple, ensuring a stronger repair. Includes everything you need to repair vehicle plastics and trim, all in one box. € 525 .00

Supplied with trolley

€ 2,349 .00

Nitrogen Plastic Repair Kit With Hot Stapler LAS92446

Nitrogen Plastic Welder With Generator LAS92452

Plastic welding with nitrogen gas creates the strongest welds possible because it eliminates oxidisation of the plastic during the welding process.

Plastic welder with its own Nitrogen generator, that eliminates the need for a nitrogen gas bottle. Workshop compressed air is used to maintain consistent temperature between welds. Makes repairs that are stronger than any two-part epoxy or hot air weld. The plastics are melted together, with no oxidation, to form the strongest possible weld.

• Compatible with almost every type of plastic used in the automotive industry • Allows the welding of filler material by heating with nitrogen from a gas bottle. Heats plastic without combustion and therefore without emitting fumes

• Compatible with almost every plastic type used in the automotive industry • Has it’s own nitrogen generator which eliminates the need for a gas bottle • Allows the welding of filler material by heating with nitrogen • The welder comes complete with a set of plastic consumables including a scraper and roller to finalise the repair • Heats plastic without combustion and therefore without emitting fumes • 230V, 50Hz, 1600W, 20-650°C • Made in Italy.

• Including integrated hot stapler, snap-off staples, corner plastic, plastic smoother and gauge • 230V, 50Hz, 1600W, 20-650°C • The welder comes c omplete with a set of plastic consumables, a scraper and a roller to finalise the repair, together with a reusable trigger spray water bottle for panel preparation. € 3,265 .80

Kit includes Spray Bottle for panel preparation, part no. Connect 31269.

€ 6,149 .00

* Gas bottle/nitrogen not supplied.

Nitrogen Plastic Welder With Generator/Stapler LAS92229 Plastic welder featuring a Nitrogen generator, that eliminates the need for a nitrogen gas bottle. Workshop compressed air is used to maintain consistent temperature between welds. This model also comes supplied with an integrated hot stapler, snap off staples, corner plastic, plastic smoother and gauge. Together with a set of plastic consumables, scraper and roller to finalise the repair, and reusable trigger spray water bottle for panel preparation.

• Compatible with almost every type of plastic used in the automotive industry • Heats plastic without combustion and

therefore without emitting fumes • Allows the welding of filler material • 230V, 50Hz, 1600W, 20-650°C.

€ 4,375 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop

Anti Static

Ionstar 2022 Ionised Airgun ATEX Approved 597993310 • Neutralises static and cleans in one operation • Once connected to the compressed air system, it generates the necessary energy via an integrated turbine generator built into the air gun, creating a powerful stream of positive and negative ions • Requires no power cables or battery-packs.

Starfinish Ion-tech Anti-static Gun 597991950

• Attach to an air-hose and blow the vehicle down immediately before applying paints or primers – It’s that simple!

• Working on a car in a paint shop builds-up a static charge across the vehicle surface. Rubbing down, wiping down and even touching the car can cause static build-up • This static electricity can cause the metallic particles in automotive paint to settle unevenly while also attracting dust and other small particles which can impact the quality of your finish • The Star Finish Anti-Static gun neutralizes the ions which cause static electricity, allowing you to maximize the quality of your paint job.

€ 939 .00

€ 2,179 .00

Weld Fume Protection

FEXP-230 Mobile Weld Fume Extractor 597992810 • 180 m 3 /hr max airflow • Metal pre-filter to stop sparks • Automatic start/stop for maximum efficiency • Mounted on 360 degree

MINI90 Portable Weld Fume Extractor 597992860

Gysmatic 9/13 XL True Colour Air Fed Helmet 276770394 • Equipped with an air-purifying, respiratory-protection system to assist in air ventilation • 2-in-1 protection • Protects the eyes from IR/UV light during welding operations • Protects from weld fumes • Supplied with charger, shoulder harness and flowmeter.

Portable unit for extracting and filtering light welding or soldering fumes. Equipped with activated carbon filters and a hose and funnel. The ready-to-use solution for light-duty bench and precision work. • Comes with carry-handle • 20 Kg total weight • Portable, carry easily from job to job.

castors for easy manoeuvrability • Supplied with 2.5m hose and a nozzle with magnetic base.

€ 1,549 .00

€ 949 .00

€ 629 .00

13 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Paint Shop

Spray Gun Cleaning

Edition 35 Compact Solvent Based 279770010 Water Based 279770030 • Timed operation • Automatic wash • Mini blue filter • Cleaner fluid, cleaner spray guns • Up to 75% increased life in gun wash • Up 75% reduction in gun wash waste • 5 year pump warranty • Easy locate system • Air extraction (solvent model only) • Stainless steel wash tank • Superior inline filtration for gun wash life extension, Mini Little Blue Filter.

Technical information: • Height : 1020mm • Width: 440mm • Depth: 350mm • Weight: 28kg • Air Input: 50-100psi/ 3.45-6.8 bar • Air Connection: 1/4”BSP.

€ 1,299 .00

* Installation and Training charged separately.

Edition 35 597990340

Celebrating 35 years of Unic International, the new Edition 35 range boasts advanced spray cleaning technology and a class leading build quality with a larger cleaning area in a smaller footprint. New ergonomic dynamics and superior filtration for gun-wash life extension. The Edition 35 range is your premium cleaner for any paint mixing room.

• High power cleaning up to 20ltrs per min • Patents pending • New ergonomic washing height • 5 year pump warranty • Superior inline filtration for gun wash life extension • Gas strut supported lid • Suitable for gravity and suction fed guns • Automatic, manual and clean rinse facilities • Other configurations available (Low VOC, single station).

€ 4,099 .00

* Installation and Training charged separately.

Paint Mixing Room Heater

NEW

1000kW ATEX Compliant Room Heater 594778633

• Increased safety convection heating panel, can be installed horizontally or vertically (ceiling or wall mounted). • Adjustable temperature control is provided by a digital thermostat • Rated at 240v AC 50/60 HZ and carry full ATEX IECEX certification for gas and dust hazards • Classification zone 1 and 2 where the flammable atmosphere is a group 11A, 11B OR 11C gas • Discreet appearance, and easy to install.

€ 1,599 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Paint Shop

Recycling

Solvent Recycler

Pneumatic Aerosol Crusher 279770140 • 4 aerosol capacity (2 or 4 at a time) • Pierces aerosol • Gases absorbed by filtration • Up to 80% compaction • Cans can be recycled as non hazardous waste! • Safety interlock • Max aerosol size 260mm height • Reduced hazardous waste storage.

For solvents that are neutral or close to neutral pH. Optional accessories also available:

• 25Ltr collection tank • Transfer loading pump • Spill tray – ask for details.

279770150 for larger aerosols and up to 8 capacity.

Copper Condenser 590010360 Suitable for neutral pH solvents

Stainless Steel Condenser 597779230 Suitable for strong acid or alkaline solvents

€ 5,999 .00 € 6,549 .00

€ 2,049 .00

Pneumatic Can Crusher 597990950

Paper/Cardboard Compactor 597779410 Reduce the cost of removing waste. By compacting and baling light cardboard and paper on site, you can reduce the volume up to 75% • Compaction up to 75% • Bale weighs only 35-45 lbs/20 kilos • Air operated 1900 lb/865 kilo ram • Completely mobile and manageable.

• Crushes up to 30Ltr cans • Air operated • Fully automatic • Compaction up to 80% • Double acting pneumatic cylinder • Door safety Interlock.

€ 2,049 .00

€ 2,475 .00

15 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Paint Shop Spray Guns

DeVilbiss DV1 Basecoat Spray Gun

DeVilbiss DV1 Clearcoat Spray Gun

DESCRIPTION

PART NUMBER

DESCRIPTION

PART NUMBER

Gun and Cup Kit | Digital HVLP Plus Air Cap and 1.2mm Tip HVLP Plus Air Cap and 1.3mm Tip Gravity Gun Only | Digital 1.2mm Tip Gun and Cup Kit | Classic HVLP Plus Air Cap and 1.2mm Tip HVLP Plus Air Cap and 1.3mm Tip Gun Only | Classic HVLP Plus Air Cap and 1.2mm Tip HVLP Plus Air Cap and 1.3mm Tip 1.3mm Tip

Gun and Cup Kit | Digital 1.2mm Tip

DEV.DV1-C-BAR-12-B+ DEV.DV1-C-BAR-13-B+

DEV.DV1-C-BAR-12-C1+ DEV.DV1-C-BAR-13-C1+ DEV.DV1-C-BAR-12-C2+ DEV.DV1-C-BAR-13-C2+ DEV.DV1-U-BAR-12-C1+ DEV.DV1-U-BAR-12-C2+ DEV.DV1-U-BAR-13-C1+ DEV.DV1-U-BAR-13-C2+ DEV.DV1-C-000-12-C1+ DEV.DV1-C-000-12-C2+ DEV.DV1-C-000-13-C1+

1.3mm Tip

1.2mm Tip and C2 Aircap 1.3mm Tip and C2 Aircap

DEV.DV1-U-BAR-12-B+ DEV.DV1-U-BAR-13-B+

Gravity Gun Only | Digital 1.2mm Tip

1.2mm Tip 1.3mm Tip 1.3mm Tip

DEV.DV1-C-000-12-B+ DEV.DV1-C-000-13-B+

Gun and Cup Kit | Classic 1.2mm Tip

DEV.DV1-U-000-12-B+ DEV.DV1-U-000-13-B+

1.2mm Tip 1.3mm Tip

DeVilbiss GPG Spray Gun Kit

Gun Only | Classic 1.2mm Tip

DEV.DV1-U-000-12-C1+ DEV.DV1-U-000-12-C2+

1.2mm Tip

DeVilbiss DV1 S HVLP Kit

DESCRIPTION

PART NUMBER DEV.905000 DEV.905001 DEV.905002 DEV.905003 DEV.905004 DEV.905005 DEV.905006 DEV.905007 DEV.905008 DEV.905024 DEV.905025 DEV.905029 DEV.905030 DEV.905031 DEV.905032 DEV.905033

1.4mm (Gpg-C86-14-C)

1.6mm (Gpg-C86-16-C)

1.8mm (Gpg-C86-18-C)

1.4MM (GPG-C30-14-C)

1.6MM (GPG-C30-16-C)

1.8MM (GPG-C30-18-C)

1.4MM (GPG-GPG1-14-C)

1.6MM (GPG-GPG1-16-C)

1.8MM (GPG-GPG1-18-C)

1.2MM (GPG-GPG1-12-C)

1.3MM (GPG-GPG1-13-C)

1.4MM (GPG-PR10-14-C)

• Deliver ultimate Smart/Spot repair application performance

1.6MM (GPG-PR10-16-C)

• Atomizes effortlessly with a selection of finely tuned air cap and fluid nozzle setups.

1.8MM (GPG-PR10-18-C)

2.0MM (GPG-PR10-20-C)

DESCRIPTION

PART NUMBER DEV.704531 DEV.704532 DEV.704533

2.5MM (GPG-PR10-20-C)

0.7, 0.9, DV1-M1, Cupped 1.0, 1.2, DV1-S1, Cupped 1.0, 1.2, DV1-S2, Cupped

Gravity Gun and Black Poly Cup Kit (GPG-PR10-UV1-C) Gravity Gun and Black Poly Cup Kit (GPG-PR10-UV2-C)

DEV.905034

DEV.905035

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Paint Shop Finishing Tools

Farecla G-Plus Polisher With UK Plug 220V FAR.GPT003

Farecla G Plus Orbit Polisher Dual Action 15mm FAR.GPT203 • 15mm throw – Balancing speed of paint correction with machine vibration • Precision engineered counterweight • Minimizes vibration and the associated user fatigue • Lightweight – Only 2.6kg, reducing muscle fatigue • Speed indicator – Lets you polish at the recommended OPM for optimal performance.

• High torque makes it ideal for 6" and 8" pads • Lightweight to help reduce muscle fatigue • Very low vibration – Only 1.7 (3 axis, m/s 2 ), reducing hand-arm vibration • Supplied with a free G-Mop 6" flexible backing plate.

Farecla G-Plus Cordless Rotary Polishing Machine FAR.GPT050

Farecla G-Plus Cordless Dual Action Polishing Machine FAR.GPT250

* Battery and charger sold separately.

Mini Cordless Polisher FAR.FG-MINIPOL/ADV • 10.8V • 75mm • With 2 Batteries • Capable of 2800RPM • Lightweight at only 0.88kg.

Pro X Smart Repair Kit IND.610305

Battery charger sold separately IND.610329

17 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Paint Shop UV Paint Curing

Recommended product

Scangrip Nova UV-S 597992630

Scangrip UV Gun 280770120

Scangrip UV Protective Glasses 281770501 € 499 .00 • Curing area 20cm diameter • Supplied with flexible bracket • Can be placed in different positions to obtain the desired UV cure angle • Long operation time with built-in timer – to cope with larger cure areas. Medium Area (20cm)

Large Area (50cm)

• Extremely powerful LED UV curing lamp for highly efficient and very fast curing of large sized paint repair areas • Long operation time • Rechargeable with exchangeable battery • Insert a new fully charged battery and continue working whilst the other battery is charging

• Featuring high-quality components and active cooling • UV-Gun has a long service lifetime and keeps high performance levels throughout daily operation • Ergonomic design gives ultimate comfort and a firm grip • UV-Gun is the ideal hand-held UV curing light. € 1,475 .00

€ 29 .00

Scangrip Extreme Plus 280770210

Scangrip Extreme 280770220

100 x 100cm Area

135 x 130cm Area

• Superior and most powerful LED work light in the world for very fast and highly efficient UV curing of larger paint repair areas, up to 135 x 130 cm, equivalent to the size of a car door • The UV-EXTREME work light is packed in sturdy and high-quality case that can withstand shocks and rough handling during shipment. The case have a built-in handle. When the lights are not in use, the transport case can be used to store the lamp • The built-in BLUETOOTH functionality makes it safe and easy to operate the lamp remotely, even in groups of up to 4 units simultaniously. Using the APP provides safe activation from a distance to avoid being physically close to the UV curing process.

• Extremely powerful LED work light for very fast and highly efficient UV curing of large paint repair areas, up to approximately 100 x 100 cm • The UV-EXTREME work light is packed in sturdy and high-quality case that can withstand shocks and rough handling during shipment. The case have a built-in handle. When the lights are not in use, the transport case can be used to store the lamp • The built-in BLUETOOTH functionality makes it safe and easy to operate the lamp remotely, even in groups of up to 4 units simultaniously. Using the APP provides safe activation from a distance to avoid being physically close to the UV curing process.

€ 2,349 .00

€ 3,549 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Paint Shop I.R. Paint Curing EURO1000G 597991730

EURO2000G 594770760 • Strong lightweight stand with 4 swivel castor wheels making it easy to manoeuvre between vehicles • Adjustable height on trigger latch of 175cm • The Euro 2000 can be adjusted into a variety of positions • 2kw power output.

• Strong, lightweight stand with 4 swivel castor wheels, making it easy to manoeuvre round the workshop • Adjustable height on trigger latch of 175cm • Single cassette, 1kw power output • Easily adjusted into a variety of positions to achieve optimal surface area temperature.

€ 449 .00

€ 585 .00

EURO3000G 594770800

• Strong, heavy duty stand with 4 swivel castor wheels, making it easy to manoeuvre round the workshop • Adjustable height on trigger latch of 175cm • Triple cassette, 3kw power output • Easily adjusted into a variety of positions to achieve optimal surface area temperature with individual lamp adjusters and hydraulic arm assistance • Easy to use controls with a digital readout.

€ 1,475 .00

Save €560

Buy all 3 Curing Lamps

€ 1,949 .00

19 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Karcher Cleaning Ice Blasters Karcher 001 IB 7/40 Advanced Compact Ice Blasting Machine (240V) 589770140

Our Ice Blaster IB 7/40 Advanced is characterised by a well-thought-out concept, many clever details, rugged durability and extremely high-grade manufacturing. The latest generation dry ice blaster has been designed to handle hard continuous use and is very well equipped. For example, it comes as standard with an integrated ground strap coil, a residual ice removal system that prevents the device from freezing once work is complete, as well as an oil and water separator for reliable operations. The airflow has been optimised in such a way that excellent cleaning results are a matter of course, even when working with low pressures and low air consumption (max. 3.5 m³/min), while operating noise is also reduced to a minimum. The jet gun with remote control for adjusting the jet parameters, stepless control of the jet pressure and the ice delivery volume via a button (can be deactivated ifdesired) and a logically structured display for reading off all operating parameters ensure a high degree of operator convenience. In addition to this, statistical values such as operating time, average ice consumption per hour or total ice consumption can be called up.

• With integrated earth wire rewinder • Oil and water separator • Blasting gun (ergonomic & save) • Blasting hose with electrical control wire and quick couplers • Switch for "air only" or "ice and air" • Tool bag

• Dry Ice output is adjustable directly on the blasting gun • Air Pressure is adjustable directly on the blasting gun • Electronic control • Grease for nozzle threads • Flat jet nozzle • Flat wrench (for nozzle change)

Karcher IB10/8L2P Dry Ice Blaster 546774800 € 18,895 .00

Site survey required.

Karcher Protective Gloves For Ice Blaster 592779976

Spontaneous cleaning work with dry ice blasters in machine or vehicle maintenance, for cleaning in the manufacturing process or for vehicle conditioning were hardly conceivable up to now as the dry ice logistics behind the scenes was too costly for short-term applications. This is now possible with the IB 10/8 L2P, the world's first dry ice blaster with integrated dry ice production made from liquid CO₂. Thanks to an innovative process, dry ice pellets are made from liquid CO₂ when necessary – L2P stands for "Liquid-to-Pellet".

Cold protection glove, size 10

with slip resistant profile.

€ 41 .95

As liquid CO₂ can be stored in gas cylinders for practically an unlimited amount of time, the usual time-consuming dry ice logistics are avoided. The very low compressed air consumption of the machine also significantly reduces the infrastructure requirements. At the same time, the advantages of the Kärcher dry ice technology are fully retained. The IB 10/8 L2P cleans very gently – also for complex contours such as grooves, bearings or grooves and in the case of heavy contamination such as burnt-on encrustations. Abrasive residues are reliably avoided.

(Category 3 according to EN 511, Level 12X EN 388, Level 2121).

Karcher Safety Glasses 592779975

€ 12,995 .00

€ 35 .95

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Karcher Cleaning

Hot Water Pressure Washers

HDS7/10-4 M Hot Water and Steam Pressure Washer EasyForce Trigger 546771100 • Superb performance for daily and deep cleaning jobs • Eco!efficiency mode, offers fuel savings of up to 20% without compromising cleaning performance • 4-pole motors for high performance and long life on board diagnostics, and 3-year burner coil warranty • HDS middle class range provides toughness, cleaning power, and low running costs.

HDS6/12C Hot Water Pressure Washer with Steam Mode 546771740 • Unique Eco!efficiency mode reduces diesel consumption by 20% without compromising daily cleaning performance • Machine protector system prolongs component life and provides a 3-year burner coil warranty • Easy to set-up, intuitive to operate and cheap to run • State-of-the-art compact hot water high-pressure cleaner.

€ 3,595 .00

€ 2,395 .00

Cold Water Pressure Washers HD6/13C Plus Cold Water Pressure Washer 546778000

HD5/12C Plus Compact Cold Pressure Washer 546990820 • On-board storage for nozzles, power cable, hose and lance • New carry handle that makes the machines truly portable • Unique lie-flat or stand up operating position.

• Flow rate 590 Ltr/h • Working pressure 130/13 bar/MPa • Current type (Ph/V/Hz) 1/230/50 • Vertical and horizontal operation possible • The automatic pressure relief protects the components and extends the service life • High-quality brass cylinder head • Large, easily accessible water fine filter for protecting the pump against dirt particles in water.

€ 812 .50

€ 695 .50

21 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48

Made with FlippingBook. PDF to flipbook with ease