Toolsaver

Specialist Tools

Hub Cleaning Tool Set 6pc • For cleaning corrosion from hubs, especially useful for cleaning round the base of studs. • Includes 1 x quick change handle and adaptor. • Also 2 x small strip discs 40.5mm & 2 large strip disc 46.5mm. 7197 Wheel Stud Cleaning Tool Set • Can be used by hand or with a cordless drill using the quick-chuck adaptor provided. • Six quick-change brushes fit both metric and Imperial studs: 12mm (7/16"), 13mm (1/2"), 14mm (9/16"), 16mm (5/8"), 22mm (7/8"), 28mm (1 1/8"). • Supplied with a 1/2"D adaptor. 6602

OFFER PRICE

£ 189. 95

£ 26. 95

OFFER PRICE

Dual Clutch Retractor Kit - for Ford Powershift

NEW

Ford 6 speed DPS6/6DCT250 (Powershift) twin plate dry clutch packs are supplied with transit hooks which are built in to the clutch unit. If the clutch has been fitted and then removed for some reason other than complete replacement the clutch pack will need the transport hooks to be reset before it is fitted back in to the gearbox. The Laser 8035 is designed to be used in accordance with Ford OEM instructions for OEM tool 307 676. NOTE: do not attempt to use this reset tool on a new clutch which already has its transport hooks set. 8035

VIDEO

6602

£ 29. 95

OFFER PRICE

Splined Bit Socket - for Ford DCT Actuators When removing and refitting the Ford dry plate dual clutch units the clutch actuators must be reset. The Laser 8036 splined bit socket is designed to fit into the actuator to allow them to be reset prior to be installed. Failure to do this reset may result in premature clutch failure or poor operation. 8036 OFFER PRICE

NEW

£ 7. 95

Wheel Hub Holding Tool The 7090 is designed to bolt to a wheel hub or drive flange to allow centre hub nuts or flange nuts to be loosened or tightened. Provided with a 1/2" drive hole to allow use of an additional power bar or torque wrench if required. 7090 Wheel Hub Separator For use on GEN3 bearings (particularly Vauxhall, Opel Insignia rear wheels) • Bolts to the wheel hub then hit with a hammer breaking the hub free from the corrosion holding it. 6660 OFFER PRICE £ 59. 95

DCT Clutch Tool - for Ford, Volvo The DCT (Dual Clutch Transmission) clutch tool is designed to allow the removal of the clutch housing complete with clutch plates from the Getrag 6 speed 6DCT450 automatic transmission. • Equivalent to OEM 9997435 & 308-763. 6661

OFFER PRICE

£ 94. 95

£ 15. 95

OFFER PRICE

Clutch Retaining Tools - for VAG

NEW

Drive Flange Locking Kit Designed to allow the drive flange to be locked preventing rotation when loosening or tightening inner drive shaft mounting bolts and hub nuts. Easily fitted utilising the vehicles own wheel bolts or nuts ensuring the specially designed plastic wheel wedges between the brake caliper and drive flange. 7591

7367

Used to assist in the removal and fitting of the multi-plate clutch pack when working on 6 and 7 speed transmissions used across the VAG ranges.

VIDEO

7591

7999

Part No. Applications

Offer Price

Transmission OEM Ref

£16.95 £18.95

T10303 T10524

7367 7999

VAG DSG 02E

6 speed

£ 44. 95

OFFER PRICE

0BH, 0DE, 0BT, 0DW 7 speed

autoclimate TM