WorkshopSolution_A3_Magazine_32p_January2020

LASER TOOLS

FRONT SUSPENSION BUSH TOOL VW T5 LAS7796 ■ Front suspension lower arm bush tool for VW T5 vans. ■ Application includes VW T5 vans from 2003, including Transporter, Caravelle & Multivan. ■ Patented design ensures both bushes are correctly aligned to each other. Laser tools advise replacement of both bushes on both sides at the same time.

INNER-DRIVESHAFT EXTRACTOR FORK LAS7876

£ 69 .08 SAVE LIST £203 .08 £ 134 .00 designed to allow the correct controlled force to be applied to the inner driveshaft to lever it out quickly and easily. No hammer is required. The driveshafts on many front wheel drives are held in the gearbox by a spring clip locking ring. To remove the driveshaft from the vehicle, the inner driveshaft requires levering out. Unless the correct tool is used that can provide the required leverage in exactly the right place, the gearbox casing, as well as the driveshaft joint, are at risk of being damaged. The 7876 Inner-Driveshaft Extractor Fork has been specifically

£ 100 .40 SAVE

REAR TRAILING ARM BUSH KIT VAUXHALL OPEL LAS7829 LIST £279 .40 £ 179 .00 Rear suspension trailing arm bush replacement kit.

REAR TRAILING ARM BUSH REMOVAL - VW T5 LAS7657 With this tool the bush can be extracted and installed without damage.

DUAL CLUTCH OIL SEAL REMOVER/INSTALLER SET - FORD LAS7821

Used to remove and install input shaft & differential seals on Ford 6 speed dry plate dual clutch gearboxes.

LIST £330 .20 £ 199 .00 £ 131 .20 SAVE

AIR POWERED DRIVE SHAFT CV BOOTS FITTING TOOL LAS7830 LIST £320 .86 £ 199 .00 £ 121 .86 SAVE

LIST £215 .90 £ 159 .95 £ 55 .95 SAVE

BRAKE CALIPER SOCKET SET - VAG LAS7809

BRAKE DISC LIP REMOVAL TOOL LAS7839

SPARE BLADE FOR BRAKE DISC LIP REMOVAL TOOL (LAS7839) LAS7840

Brake disc lip removal tool kit, for removal of the corrosion and ridge that builds up on brakes discs & hubs.

■ Brake Caliper Socket Set VAG ■ 1/2” drive brake caliper socket set for VAG.

Designed for stretching flexible CV Boots onto the drive shaft assemblies without the need to remove the CV joint.

LIST £40 .64 £ 29 .99 £ 10 .65 SAVE

EXTERNAL DEBURR/ CHAMFER TOOL 13-35MM LAS7856 LIST £152 .28 £ 99 .99 £ 52 .29 SAVE

EXTERNAL DEBURR/ CHAMFER TOOL 3-19MM LAS7510 LIST £71 .12 £ 49 .99 £ 21 .13 SAVE

£ 46 .99 SAVE

LIST £141 .98 £ 94 .99

BRAKE PIPE CORROSION TOOL 400MM LAS7777

ENGINE SUPPORT BRACKET FOR MINI COOPER LAS7797

Extended length brake pipe corrosion assessment tool, with 30° angled head for hard to reach areas.

Engine support bracket for MINI Cooper & Cooper S. Allows removal of the left hand engine mounting while maintaining engine position for access to the engine camshaft drive system etc.

External deburr/ chamfer tool fitted with tungsten blades for repairing damaged bolts.

Effective on stainless steel, hardened steel, mild steel, copper, brass, wood, fibreglass, hard plastic.

LIST £17 .78 £ 12 .99 £ 4 .79 SAVE

LIST £52 .08 £ 34 .99 £ 17 .09 SAVE

LIST £55 .88 £ 39 .95 £ 15 .93 SAVE

LIST £21 .60 £ 16 .95 £ 4 .65 SAVE

REAR SUSPENSION BUSH REMOVER & INSTALLER - FOR MERCEDES-BENZ LAS7791

WHEEL BEARING CIRCLIP REMOVAL & ASSEMBLY LEVER LAS7877

SUBFRAME ALIGNMENT PINS - FORD LAS7467 Application: C-Max, Cougar, Escort, Fiesta, Focus, Fusion, Galaxy, Kuga, Mondeo, Orion, Puma, S-Max, Tourneo Connect, Transit, Transit Connect, Transit Custom.

HOG RING PLIER SET LAS77164 Hog ring plier kit with 100 hog rings. Ideal for seat repairs to classic cars.

Specially designed lever that allows the easy removal and fitting of wheel bearing internal circlips.

Rear suspension control arm outer bush remover & installer for Mercedes-Benz.

LIST £88 .14 £ 58 .99 £ 29 .15 SAVE

LIST £37 .08 £ 24 .99 £ 12 .09 SAVE

LIST £59 .70 £ 39 .99 £ 19 .71 SAVE

LIST £54 .10 £ 39 .99 £ 14 .11 SAVE

01827 838 477 BRANCHES NATIONWIDE

4