AG publications ASAP supplies equipment catalogue

Ignition protected & CE approved For automatic on/off bilge pump control SUPER SWITCH FLOAT SWITCH

• • • • •

Ideal for all bilges including narrow bilge applications

Design prevents rapid on / off cycling

Mercury free

Part no. 504795

Model

Volts

Max. current

Height mm Width mm Depth mm

Cover

504795

37A 12V / 24V / 32V 20A

110

40

105

No

HIGH BILGE WATER LEVEL ALARMS These Rule bilge alarms automatically detect when bilges are filled with water. Consists of a non-mercury float switch (for more information, see below) and an in-dash gauge that features both a visual and an audible 85 dB alarm.

PUMPS

Part no. 710242 710244

Model

Volts

Max. Amps

Height mm Width mm Depth mm Gauge diameter mm

33ALA 12V 14A 32ALA 24V 14A

120 120

60 60

90 90

60 60

710242

AUTOMATIC BILGE PUMP FLOAT SWITCHES

These float switches provide the ultimate in reliability for your boat. The float switch can be installed with a SHURflo bilge pump to ensure that your bilge stays dry when in operation. SHURflo float switches can be used with any kind of pump and also with water bilge and other alarm systems. • Manufactured in corrosion resistant and explosion proof material • Contains no mercury • Remote or direct mounting • 0.9 metres (3ft) tinned wire assembly • Ignition protected • 3 year limited warranty

509600

Part no. 509600 509601

Model

Volts

Max. current

Height mm Width mm Depth mm

Cover

359-111-30 12V / 24V 12A 359-111-40 12V / 24V 12A

112 130

92

32 71

No Yes

102

509601

ROLLING BALL FLOAT SWITCH

• Designed to simply convert most bilge pumps into automatic operation • Easy attachment to Johnson bilge pumps • Ball bearing actuated • Contains no mercury • Switches on at 57mm (2-1/4”) and switches off at 20mm (3/4”) of water • 3 year limited warranty

508321

Part no. 508321

Model

Volts

Max. current

Height mm Width mm Depth mm

2601

12V / 24V

15A

100

80

50

Uses technology which can detect disruptions caused by water and fluids. The detector cells used never come into contact with the water and are corrosion resistant. • 8 second delay to ensure that water level is true • Two wire device • Fully submersible • Suitable for all pumps up to 20A draw • Supplied with 30” copper strand tin coated wire • Activation at 50mm, deactivation at 20mm of fluid ULTIMA ELECTRONIC BILGE PUMP SWITCH

508324

Part no. 508324

Model

Volts

Max. amps

Height mm Width mm Depth mm

36303-10-1901

12V / 24V

20A

62

85

29

230

info@asap-supplies.com

www.asap-supplies.com

01502 716993