AG publications ASAP supplies equipment catalogue

REPAIR KITS AND ACCESSORIES

Part no. 506218 506219 506290 506338 506390 506393 Part no. 506586 506587 506588

Repair kit for Whale model

Construction

Chimp 2 Chimp 2

Nitrile

506218

Neoprene Neoprene Neoprene Neoprene

Chimp MK1 Gusher 30 Gusher 8 Gusher 25

Nitrile

PUMPS

506338

Description

Plastic compact 90° elbow for 25mm (1”) hose Plastic compact 90° elbow for 38mm (1-1/2”) hose

Y-piece plastic for 38mm (1-1/2”) hose

506587

PLASTIC STRUM BOXES

Whale plastic strum boxes with debris gauze. These Whale strum boxes come complete with an integral non-return valve.

Part no. 505708 505718

For hose I.D. mm (inch) 25 + 38 (1” + 1-1/2”)

Entry

Grating dimensions mm (w x h)

Non-return valve

Top

146 x 56

Yes Yes

25 + 38 (1” + 1-1/2”)

Side

100 x 100

505718

MACERATOR WASTE PUMPS

Can be used for emptying marine holding tanks when not in a discharge restricted area. Duty cycle of the pump is 15 minutes continuous which means a 680 litre (180 US gallons) tank can be emptied in a single operation. It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build-up of sediment in the tank which could cause a potential blockage. The Jabsco macerator pumps are the ideal pump for the emptying of fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also its grinding properties. • Triple sealed motor to prevent both internal and external motor corrosion • New four-bladed chopper to reduce clogging • Detects the absence of fluid to automatically shut-off pump before the impeller is damaged • Sensor provides adequate run-dry period to allow initial priming of the pump • Self-priming to 1.2 metres (4ft) vertical lift • Complies with USCG 183.410 and ISO 8846 Marine (Ignition Protection)

507512

Part no.

Model no.

Volts

Amps

Flow rate lpm

Inlet barb mm (inch)

Outlet mm (inch)

Dimensions mm (l x w x h) 290 x 120 x 90 290 x 120 x 90

Service kit

507512 507524

507519 507519

18590-2092 12V 16A 43

38 (1-1/2”) 38 (1-1/2”)

25 (1”) 25 (1”)

18590-2094 24V 8A

43

MACERATOR WASTE PUMPS

SHURflo’s unique dual blade and housing construction ensures problem free pumping, providing superior performance in harsh marine environments. • Specifically designed for sanitation waste and fish box evacuations • Seamless sealed design • Run dry capability • Sealed manual turn key • Thermally protected • Ignition protected • Premium impeller technology • CE Listed

509550

Part no.

Model no. Volts

Max. amps

Flow rate lpm

Inlet barb mm (inch)

Outlet barb mm (inch)

Dimensions mm (l x w x h) 274 x 125 x 97 274 x 125 x 97

509550 509551

3200-001 12V 15A 49

38 (1-1/2”) 38 (1-1/2”)

25 (1”) 25 (1”)

3200-011 24V 7A

49

235

info@asap-supplies.com

www.asap-supplies.com

01502 716993