AG publications ASAP supplies equipment catalogue

SOUNDPROOFING

Type

2 Quiet 45 The best for older engines and low frequency sound, twin barrier

Type

Super 58 Excellent for turbo charged engines and higher frequencies

Sheet thickness mm

Sheet thickness mm

45

58

Sheets per pack

Sheets per pack

2

2

Sheet size (approx.) mm

Sheet size (approx.) mm

1000 x 600

1000 x 600

Coverage per box Typical sound reduction @ 500hz

Coverage per box Typical sound reduction @ 500hz

1.2m 2 / 12.91ft 2

1.2m 2 / 12.91ft 2

29dB

26dB

With Lead Loaded Barrier

With Lead Loaded Barrier

Type

Box of 2 801534 801537

Single sheet

Type

Box of 2 801634 801737

Single sheet

Silver ‘O’ foil

801534-1 801537-1

Silver ‘O’ foil

801634-1

White glass cloth

White glass cloth

-

SOUNDPROOFING ACCESSORIES

ADHESIVE SPRAY

FOIL TAPE

801002 •

801014 • Self-adhesive ‘O’ foil tape for covering joints and edges • 50mm wide • Sold per 45 metre roll

500ml of Quietlife spray on neoprene based adhesive, sufficient for one four sheet box, 2.40m 2 Always test on a small area first to ensure suitability of the adhesive Please note: Carrier restrictions may apply

•

•

FIXING WASHERS

HATCH TAPE

801018 • Self-adhesive foam tape • Reduce noise from hatches and bulkhead doors

801022 • These can be screwed through the sheet to the panel • Recommended for under floor and vertical bulkheads

• 24mm wide x 3mm thick • For sealing hatch joints • Sold per 10 metre roll

• 4mm fixing hole • 50mm diameter

We recommend mechanical fixings are used where heavy weight soundproofing is fixed to vertical or upside down surfaces (ceilings etc). Especially where higher ambient temperatures exist, such as engine room applications.

ROCKWOOL MARINE FIREBATT 2000

Certain regulating certification authorities insist on the use of non-foam products for fire barriers. For these applications, we supply Quietlife FireBatt Marine 2000 rockwool products. 801124 • 40mm thick • Has a fire rating of 60 minutes • An ‘O’ foil face. The ‘O’ foil fireproof facing has a light reflective, reinforced silver finish • Sold per sheet • Approximate sheet size: 1000 x 600 x 40mm

801124

For sound absorption we would recommend this lead damper layer. 801093 • 5kg polymeric damper sheet • 3mm thick • Sold per 1250 x 1050mm roll • Also, ideal for use on floors under carpet to provide additional damping of low frequency sound

801025 A self-adhesive pad that secures the spike to the bulkhead. Comes with a fixing square which secures the FireBatt sheet to the spike.

801093

801025

Soundproofing is only part of the sound reduction process, there are many other products you can use to reduce noise, such as flexible shaft couplings, exhaust mufflers / silencers and flexible engine mounts.

263

info@asap-supplies.com

www.asap-supplies.com

01502 716993