example

PRE-MADE FUEL HOSE

• Specifically manufactured to meet ISO 7840 requirements, meaning it is fire resistant for at least 2 minutes • Pressure tested to 1500psi • Plain spigot hose end For more information on the below hoses and our full range of hose, please see Hose section, page 190. Other sizes available at www.asap-supplies.com

FUEL SYSTEMS

Spigot size 1/4”

Spigot size 5/16”

Spigot size 3/8”

Length

302811 302813 302814 302815 302816 302817

302821 302823 302824 302825 302826 302827

302831 302833 302834 302835 302836 302837

12” 18” 24” 30” 36” 42”

302811

The Seaflow annealed soft copper piping (20 SWG) is manufactured to BS EN 12735-1:2001 standards. This copper pipe is supplied in a 10 metre coil. 30 metre coils are available online at www.asap-supplies.com COPPER TUBING

Part no. 302250 302350 302450 302550 302650 302750

O.D. inch Working pressure

Part no. 302111 302113 302114 302115 302116

O.D. mm

Working pressure

1/8”

3026 PSI 1978 PSI 1891 PSI 1513 PSI 1261 PSI 945 PSI

4 6 8

1993 PSI 2211 PSI 1658 PSI 1324 PSI 1091 PSI

3/16”

1/4”

5/16”

10 12

302650

3/8” 1/2”

PIPE CLIPS AND COPPER SADDLES

FUEL FILLERS

ANTI-THEFT DEVICE

V-FUELSAFE With ever increasing fuel prices, the theft of fuel from boats is becoming a far more common occurrence. The Vetus fuel safe device allows fuel in, but doesn’t allow siphon hoses in. Simply insert into the deck filler, where it lodges itself in and cannot be removed. • Slips inside 38mm (1 1/2”) or 51mm (2”) flexible filler hose and locks to prevent fuel theft by siphoning

304672

413759

305001

304981

• • • •

55mm x 72mm

Suitable for both diesel and petrol Not for use with steel or rigid fuel pipes

V-FUELSAFE

For pipe clips and copper saddles, please see Hose section, page 202.

For fuel deck fillers, please see our Deck section, pages 24-26.

No dismantling is required

REFUELLING PUMPS

FUEL TRANSFER PUMPS

EASYBAILER PORTABLE PUMP

306702

306555

Must not be used with petrol or other flammable liquids.

The Rule submersible and inline pump is suitable for diesel, fresh water and salt water transfer with no spillage. Connections: 13mm (1/2”) Hose

Self priming light duty pumps for transfer of diesel and light oils. Some of the nitrile impeller pumps on pages 243-244 can also be used for transfer. Part no. Volts Flow rate Fuse size 306702 12 35 lpm 20 306704 24 35 lpm 10 306712 12 50 lpm 20 306714 24 50 lpm 10

506371

Length: 165mm Diameter: 38mm

506371 Suitable for bilge water or diesel transfer. This hand held pump provides easy bail out on board small boats and the flexible hose allows you to pump out from hard to reach places.

Part no. 306555 306557

Volts

Flow rate lpm

Amps

12 24

18 18

4.5 2.5

161

info@asap-supplies.com

www.asap-supplies.com

01502 716993