example

BOW FENDERS Crescent shaped fender designed to protect the bow or stern of the boat.

DECK FITTINGS & HARDWARE

Body Diameter mm Width mm Depth mm White

Navy blue

895035 895036

895135 895136

102 130

330 400

340 410

895035

895136

PONTOON FENDERS This dock fender has a 90° angled corner to prevent boats from getting scratched by pontoons, wharfs, jetties and other areas that protrude into the waterways. The fender is easy to mount by screwing directly into the woodwork, and then provides long lasting protection

Length mm Width mm Depth mm Height mm White

Navy blue

895050

895150

250

250

60

100

895050

895150

MULTI DOCK FENDERS Multi Dock Fenders can be used in many different ways to prevent boats from getting scratched by pontoons, wharfs, jetties and other areas that protrude into the waterways. Short - can be used as a straight fender or converted for use as an inside or outside corner fender Standard - can be used as a straight fender, with or without an added Dan-Fender 520L ( 895003 , 895103 ), or can be converted for use as an inside or outside corner fender. Mini - can be used as a straight fender, however this fender can also be cut in half for use as 2 separate fenders.

895052

895054

Type Short

Width mm Depth mm Height mm White

Navy Blue

895052 895054 895056

895152 895154 895156

400 900 950

180 180

181 181 120

Standard

Mini

52

895056

FENDER HAND PUMP

INFLATION ADAPTOR

895991

895995

895991 Specially designed for use with Dan-Fender products with metal valves. It is suitable for use on board to top up marine fenders and buoys with air when required.

895995 Dan-Fender inflation adaptor for use with the heavy duty range of fenders and buoys. This adaptor can be used to remove the valve plug from the fenders, before being screwed into the valve. The other threaded end can then be mated to your means of inflation, such as a compressor, to easily inflate the fender or buoy.

It is very important that these products are not over inflated. You should be able to press your finger into the fender or buoy and make a small dent, they should not be harder than this. The reason for this is that air expands in warmer weather which can enlarge and deform the body of the fender or buoy, weakening the materials and reducing its lifespan.

FENDER LOCK

LIFE RINGS

• •

Pair of Perko 1299 fender locks Made from chrome plated zinc

These life rings feature four reflective tapes which go around the ring to aid visibility in poor conditions.

• Comes with eyes for permanent attachment to fender line

827170

890101

Part no.

Flange Outside Diameter mm (inch)

Eye Inside Diameter mm (inch)

Part no.

Type

Outside Diameter mm

Approved for use with

827170

890101

38 (1-1/2”)

9.5 (3/8”)

Compact

600

Pleasure boats (Ministerial order 385/99) Commercial boats, R.I.N.A. approved.

Eye plates also available on page 21.

890103 890105

Classical

750

Super compact 640

17

info@asap-supplies.com

www.asap-supplies.com

01502 716993