example

SUPERFLEX MARINE EXHAUST HOSE

•

Suitable for wet exhaust systems only

• Not only tough, but also extremely flexible to help make the installation as easy as possible • Approved to R.I.N.A. and Lloyd’s register specification • Black corrugated cover is resistant to abrasion, oils and marine agents • Self-extinguishing CB / NBR rubber • The reinforcement is by double wire helix and textile plies • Inside is finished smooth NBR rubber • Temperature range: -25°C to +120°C • Working pressure: 43.5 PSI (3 bar) • Burst pressure: 130 PSI (9 bar) • Available per metre cut from a coil or receive extra discount when ordering full coil lengths Other sizes available, please contact us or visit our website at www.asap-supplies.com

HOSE

Per metre

Per coil 10 metres

Per coil 20 metres 412519-20 412525-20 412530-20

I.D. mm (inch) 19 (3/4”)

O.D. mm

Inner bend radius mm

Stainless steel 316 superclamp to suit

412519 412525 412530 412532 412538 412540 412545 412551 412555 412560 412563 412570 412576 412589 412591 412592 412594 412593 412595 412597

- - -

416803 416805 416806 416807 416808 416809 416810 416811 416813 416814 416815 416816 416816 416819 416820 416822 416822 416823 416826 416830

29 34 38 40 46 48 53 60 65 70 74 80 86

80

25 (1”)

100 120 130 150 160 180 200 220 240 250 280 300 360 400 440 460 500 825

30 (1-3/16”) 32 (1-1/4”) 38 (1-1/2”) 40 (1-9/16”) 45 (1-3/4”) 55 (2-1/6”) 60 (2-3/8”) 63 (2-1/2”) 70 (2-3/4”) 51 (2”)

412532-10 412532-20 412538-10 412538-20 412540-10 412540-20 412545-10 412545-20 412551-10 412551-20 412555-10 412555-20 412560-10 412560-20 412563-10 412563-20

412591

412570-10 -

412576-10 412576-20

76 (3”)

412589-10 - 412591-10 - 412592-10 - 412594-10 - 412593-10 - 412595-10 - 412597-10 -

89 (3-1/2”)

102 114 122 126 139 165 219

102 (4”)

Use this to work out how much water is in your exhaust hose when engine is running. We advise at the very maximum, you should have 50% water in the hose. Inner radius (cm) x inner radius (cm) x length (cm) x Pi (3.14159), divided by 2, divided by 1000 = capacity (litres) of water in exhaust hose when engine is running.

110 (4-3/8”) 114 (4-1/2”)

127 (5”) 152 (6”) 203 (8”)

1200

HOT WATER HOSE & STEAM HOSE

Seaflow hot water and steam hose is suitable for the delivery of hot water mixed with steam and non-corrosive hot liquids. The hot water hose is also suitable for delivery of hot water with very light chemical content, and meets ISO 1307 for rubber and plastic hoses. • This coolant hose can replace Volvo Penta 952968 marine rubber tube • Hot water and steam hose structure • Inner tube: Smooth black EPDM rubber • Reinforcement: High tensile synthetic textile • Cover: Smooth black EPDM rubber resistant to abrasion, heat, ozone and weather • Surface: Smooth with fabric impression • Available per metre cut from a coil or receive extra discount when ordering full coil lengths

Per metre

-100= 100 metres -50 = 50 metres

I.D. mm (inch)

O.D. mm

Burst pressure bar (psi)

Working pressure bar (psi)

Bend radius mm

Stainless steel 316 superclamp to suit

206016

206013 206013-100 206016 206016-50 206019 206019-50 206022 206022-50 206025 206025-50

416204 416204 416206 416206 416207

13 (1/2”) 19 (3/4”) 16 (5/8”) 21 (0.8”) 19 (3/4”) 26 (1”)

30 30 30

10 10 10 10 10

130 150 190 220 250

22 (7/8”) 30 (1-3/16”) 30

25 (1”)

33 (1.3”)

30

HOT WATER HOSE • Seaflow hot water (radiator) hose for the delivery of air, hot water and engine coolant • Rated to ISO 1307 • Typical applications include: engine coolant to the expansion tank • Temperature range: -30°C to +100°C with maximum peaks of up to 120°C • Sold per metre Part no. I.D. mm (inch) O.D. mm Working pressure bar (psi) Bend radius mm Burst pressure bar (psi)

Stainless steel 316 hose clip to suit

206058

416201

8 (5/16”)

15

10 (145)

80

30 (435)

206058

191

info@asap-supplies.com

www.asap-supplies.com

01502 716993