example

NYLON STEERING HOSE Seaflow nylon steering hose suitable for use in a hydraulic steering system. This tube is recommended for short runs of up to 30m (100 ft.). Available per metre cut from a coil or receive extra discount when ordering full coil lengths. Per metre 30 metre coil O.D. mm (inch) Working pressure bar (PSI) 603589 603589-30 10 (3/8”) 25 (370)

603589

REUSABLE END FITTINGS Hose end fittings with end spigot, designed for use in marine hydraulic steering systems.

HOSE

Part no. 603511 603512

For hose size mm

Spigot size mm

Angle

8 8

10 10

Straight

603511

90°

HYDRAULIC OIL COOLER PIPES

HYDRAULIC HOSES

We offer made to order, high quality, bespoke Parker hydraulic hose. See the Engine & Gearbox section, page 93 or visit www.asap-supplies.com for more information.

Crimped pipes for oil coolers with pre fitted end connections. See the Engine & Gearbox section, page 93 for more information.

PRE-MADE FUEL HOSE

• Specially developed to meet the stringent standards laid out in ISO 7840, and the Recreational Craft Directive • Fire resistant and fully meets the standards and requirements, and in some cases exceeds them • Features spigot hose ends • Special nitrile rubber construction which has an inner metal support • Spigots on the end are heavy copper and swaged in brass, featuring a hexagonal collar for securing to a compression fitting • Pressure tested to 1500psi (103 bar) • Burst pressure 1800-2500 PSI (124-172 bar) • Fire test performance at 750°C - 205-220 seconds • Fuel permeation: 1.23-1.95 m 2 h

Spigot size 1/4” O.D.

Spigot size 5/16” O.D.

Spigot size 3/8” O.D.

Hose length inch

302811

302811 302813 302814 302815 302816 302817

302821 302823 302824 302825 302826 302827

302831 302833 302834 302835 302836 302837

12” 18” 24” 30” 36” 42”

A1 FUEL HOSE

• Seaflow marine fuel delivery hose suitable for diesel, biodiesel and unleaded fuel • Can be used in fuel supply and return lines, fuel tank vents and fuel tank filling, as well as other applications that are in fire risk areas • Approved to R.I.N.A. and Lloyd’s register specification • Specifically manufactured to meet ISO 7840 requirements, meaning it is fire resistant for at least 2 minutes • Features a textile reinforced black, synthetic rubber cover, which is resistant to abrasions, weather, heat and oil • The inner tube is also a synthetic rubber which encloses up to 50% of fuel odours • Temperature range: -35°C to +80°C • Available per metre cut from a coil or receive extra discount when ordering full coil lengths

Per metre 10 metre coil

40 metre coil

I.D. mm (inch) 6 (1/4”) 8 (5/16”) 10 (3/8”) 13 (1/2”) 16 (5/8”) 19 (3/4”)

O.D. mm

Bend radius mm

Burst pressure bar (psi)

Stainless steel 316 hose clip to suit

305906 305908 305910 305913 305916 305919

305906-10 305906-40 305908-10 305908-40

416201 416202 416202 416203 416205 416205

16 60 17 80 19 100 22 120 26 160 30 190

14 (203) 14 (203) 14 (203) 10 (145) 10 (145) 10 (145)

305913

305910-10 305913-10

305910-40 305913-40

305916-10 305916-40 305919-10 305919-40

193

info@asap-supplies.com

www.asap-supplies.com

01502 716993