example

NYLON PIPING

• • • • • •

Nylon tubing suitable for use as a small marine fuel line

Construction is a natural colour

Extremely flexible to fit in any confined area For low pressure applications only

Sold per metre

Temperature range: -10°C to +80°

Per metre

O.D. inch Working pressure bar (PSI)

Per metre

O.D. mm

Working pressure bar (PSI)

302371 302471 302571 302671

3/16”

31 (450)

302153 302154 302155

6 8

24 (350) 23 (335) 22 (320)

302371

1/4”

25.5 (370) 25.5 (370) 27.5 (400)

5/16”

10

3/8”

HOSE

COPPER TUBING

• Annealed soft copper piping manufactured to BS EN 12735-1:2001 standards • Fuel line installations are subject to regulation • Depending on the vessel type and area of use, almost all fuel systems will need to meet certain standards • We strongly advise you to check with your local boating inspector or certifying authority before purchasing / installing fuel system items, to ensure that you have the correct type for your intended use • Sold in 10 metre lengths • Some are also available in 30 metre coils, visit w ww.asap-supplies.com

Part no. 302250 302350 302450 302550 302650 302750

O.D. inch Working pressure bar (PSI)

Part no. 302111 302113 302114 302115 302116

O.D. mm

Working pressure bar (PSI)

1/8”

208.5 (3026) 136 (1978) 130 (1891) 104 (1513) 86.5 (1261)

4 6 8

137 (1993) 152 (2211) 114 (1658) 91 (1324) 75 (1091)

3/16”

302650

1/4”

5/16”

10 12

3/8” 1/2”

65 (945)

PIPE REPAIR KITS

• Complete kit for making emergency repairs to a wide variety of pipe materials, including exhausts • Do not set sail without it, damage to some hoses can be catastrophic • Consists of a patented fibreglass cloth, impregnated with water activated resin that sets in minutes, with no measuring, mixing, or messy clean-up • Approved and used by the US Navy and Coast Guard • Each kit contains a roll of CanFix cloth, a “two part epoxy” for filling and sealing, a pair of latex gloves, and instructions More information online at www.asap-supplies.com

CanFix applications include: • Riser exhaust • Leaking hydraulic lines •

Part no.

Repair kit size mm 50 x 1200 75 x 2743 100 x 3657

For pipe size mm (inch)

425002

425002 425003 425004

13 - 25 (1/2” to 1”) 25 - 50 (1” to 2”) 50 (2”) and above

Water cooling hoses and fluid lines Leaking steam lines and fittings Corrosion protection coating Repair broken tool handles etc. Emergency repairs to fuel lines

• • • •

CLAMP AIDS

• Designed to offer increased protection when working in small environments with hose clips and clamps • Slides easily over the sharp clip end of the hose clamp band to help protect against the sharp edges • Available in a wide range of colours to help provide a quick visual identification of fluid circuits when needed • If something goes wrong with a fluid line, problems can be solved quickly by using basic colour codes to identify and take action without delay • For people who don’t work on engines all the time, the simple visual identification of the different fluid circuits on the engine would be very useful, as most engines are painted all over, including the hoses • No need to remove any hoses to fit Clamp-Aids, they can be fitted in seconds by the operator or engineer • Supplied in packs of 20 • These only fit standard Jubilee hose clips, see page 201

Part no. 413191 413192 413193 413194

Colour Orange

Suggested use:

Part no. 413195 413196 413197

Colour Blue Black Green

Suggested use: Fresh water Sewage lines

Gas lines

Red

Petrol lines Diesel lines Grey water

Yellow

Raw water

Grey

200

info@asap-supplies.com

www.asap-supplies.com

01502 716993