example

ROPE CUTTERS

The shaft driven rope cutter rotates with the shaft, which in turn instantly cuts any rope, weed or debris picked up or snagged by the propeller.

• Simple to fit • Made in the UK • Made from 316 stainless steel • Suitable for all types of working or leisure vessels

DRIVETRAIN

More sizes available online, see www.asap-supplies.com.

CLAMP ON

SLIDE ON

810128

810107

• • • • • •

Supplied in two halves

• • • • • •

A single piece unit

Easier to fit as no need to remove propeller Sizes up to 2-1/2” / 55mm shafts All supplied with allen keys, fittings and instructions

Requires removal of the propeller to install

Sizes up to 2” / 50mm shafts

All supplied with allen keys, fittings and instructions

Secure with grub screw

Secure with grub screw

No moving parts to service or fail

No moving parts to service or fail

Clamp On - Imperial

Slide On - Imperial

Part no.

Shaft Size inch

Blade Diameter inch

Unit Width inch

Minimum Gap inch

Part no.

Shaft Size mm

Blade Diameter inch

Unit Width mm

Minimum Gap mm

810121 810123 810124 810125 810126 810127 810128 810129 810130 810131 810132

810103 810104 810105 810106 810107 810108 810109 810110

3/4”

3.15” 3.15” 3.55” 3.55” 3.74” 3.74” 3.74” 4.13” 4.13” 4.57” 4.57”

0.67” 0.67” 0.67” 0.67” 0.67” 0.67” 0.67” 0.67” 0.67” 0.87” 0.87”

0.9” 0.9” 0.9” 0.9” 0.9” 0.9” 0.9” 0.9” 0.9”

1”

3.15” 3.15” 3.15” 3.94” 3.94” 3.15” 4.72” 4.72”

0.47” 0.47” 0.47” 0.47” 0.47” 0.47” 0.47” 0.47”

0.7” 0.7” 0.7” 0.7” 0.7” 0.7” 0.7” 0.7”

1”

1-1/8” 1-1/4” 1-3/8” 1-1/2” 1-1/4” 1-3/4”

1-1/8” 1-1/4” 1-3/8” 1-1/2” 1-5/8” 1-3/4”

2”

2”

Slide On - Metric

2-1/4” 2-1/2”

1.26” 1.26”

Part no.

Shaft Size mm

Blade Diameter mm

Unit Width mm

Minimum Gap mm

810153 810155 810156 810157 810158 810159

25 30 35 40 45 50

80 80

12 12 12 12 12 12

18 18 18 18 18 18

Clamp On - Metric

Part no.

Shaft Size mm

Blade Diameter mm

Unit Width mm

Minimum Gap mm

100 100 120 120

810173 810175 810176 810177 810178 810179 810180

25 30 35 40 45 50 55

80 85 95 95

17 17 17 17 17 17 22

23 23 23 23 23 23 32

105 105 116

Minimum gap = The minimum gap required to fit Prop Protector, as it needs to be sufficient to allow water to circulate in the shaft bearing.

ANODES AND ELIMINATORS FOR PROPELLER SHAFTS Protect your stern equipment by using anodes. As a general rule, we supply zinc anodes for salt water, magnesium anodes for fresh water and aluminium anodes for brackish water. However, you should ensure you select the correct anodes for your hull and location. For propeller shaft and stern gear applications we offer: • Shaft anodes

• Shaft collar anodes • Propeller nut anodes

• Max prop anodes • Prop nut anodes • Electro eliminator brush sets See Anode section, page 2.

43

info@asap-supplies.com

www.asap-supplies.com

01502 716993