example

COAXIAL CABLE

Radio guide specification coaxial cable from the ASAP Electrical range. These cables are designed for transmitting radio communication signal, making them suitable for use on board boats. The cables features a centre core surrounded by a dielectric insulator, which is then protected by a metallic shield and a plastic jacket. The design does not permit electric and magnetic fields from outside the cable from interfering, and at the same time allows minimal leakage from inside the cable. The dielectric insulators in these cables are made from solid polyethylene, which results in a time delay of 1.54 nano-seconds per foot. The cable features a single, braided shield to protect the signal carrying core. • Characteristic impedance: 50 ohms • Max attenuation: 13.104 @ 750 MHz dB/100 ft

ELECTRICAL

716501

25 metres

100 metres

Model

Core size mm Cable O.D. mm Dielectric

Insulator size mm

716500 716500-100 716501 716501-100

RG-58 0.81

5

2.9 7.2

RG-213 7 x 0.75

10.3

SOLDERLESS CONNECTORS

SOLDER CONNECTORS

No solder connection, install in seconds using only pliers and wire cutters.

Solder connection required.

716504

Part no. 716502

Model

Description

Part no. 716504

Model

Description

716502

PL-259-CP-G Centre pin connector for RG-8/X and RG-58 cable PL-258-CP-G Centre pin connector, used to join (splice) two lengths of RG-8/X and RG-58

PL-259-G Centre pin connector for RG-8AU and RG-213 cable NM-8-213-G Male N connector for RG-8AU and RG-213 cable

716503

716505

716503

716505

TERMINATION KIT

716597 Shakespeare solderless cable termination kit. All the spare parts used for solderless terminations for Whipflex ( 716530 ), Hawk ( 716514 ) and Raider ( 716532 ) antennas. Full fitting instructions included.

716597

DECK PLUGS AND SOCKETS

Shakespeare deck plug and sockets are designed for use with coax cables listed above with ‘N’ type connectors. They are supplied with a shroud and relevant mounting screws, as well as 2 protective caps.

Part no. 716506 716507

Model ACC105 ACC106

For coaxial cable 716500 (RG-58) 716501 (RG-213)

716507

AERIAL AND ANTENNA BASES

All have a standard 1”- 14 thread.

Part no.

Material

Description

Suitable for antennas up to metres

716591 716592 716594 716595

Stainless steel

4 way ratchet 4 way ratchet

2.7 1.0 1.5 1.4

716591

716594

716592

Nylon

Stainless steel

Fixed

Nylon

Mounts 22-25mm rail

716596 Heavy duty vertical antenna base Stainless steel construction antenna mount. Base comes complete with U-bolts and nuts. This base is 120mm high with a 90mm x 90mm backing plate.

716596

716595

53

info@asap-supplies.com

www.asap-supplies.com

01502 716993