example

PHOENIX SINE WAVE INVERTERS

The Victron Phoenix inverter is a power inverter designed with high efficiency and performance in mind. It uses true sine wave Alternating Current to exactly replicate domestic current, allowing the use of 230V appliances off a 12 volt leisure battery. • Features a VE.Direct communication port (part number VC ASS030536011 ), which can be used to connect the inverter to a PC or laptop, or to an Apple or Android smart phone • Protects against overheating and are short circuit proof • Operating temperature: -40°C to +65°C • High start up power to support high load at start up

VC PIN245010400

ELECTRICAL

12V

24V

VA (Watts) Height mm Width mm Depth mm

VC PIN122510400 VC PIN242510400

250 375 500 800

86 86 86

165 165 165 216 232 255 258

260 260 260 305 327 125 218

VC PIN123750400

-

VC CIN122200000

VC PIN125010400 VC PIN245010400 VC PIN121800400 VC PIN241800400 VC PIN121220400 VC PIN242120400 VC CIN122000000* VC CIN242200000* VC PIN123020000* VC PIN243020000*

105 117 520 362

1200 2000 3000

*Hard wired, compact versions which are bulkhead mounted

VC PIN123020000

PHOENIX CONTROL VE.DIRECT

VC REC040010210 Suitable for all Phoenix VE.Direct inverter models. The inverter control panel is designed to be a remote on / off control for Victron Phoenix inverters.

VC REC040010210

PHOENIX INVERTER CONTROL PANEL VC REC030001210

Suitable for Phoenix inverter models: 12/1200, 12/1600, 12/2000, 12/3000, 12/5000, 24/1200, 24/1600, 24/2000, 24/3000, 24/5000, 48/3000 and 48/5000. The control panel features a UTP remote monitoring and control socket. The panel’s LEDs automatically reduce in brightness during night time. It can also be used on a Victron MultiPlus Inverter Charger when an automatic transfer switch is required, but no charger function. The Victron Blue Smart Battery Charger features a six-step adaptive charging algorithm to maintain health, life and performance of batteries. It will also attempt to recharge a ‘dead’ battery by feeding it a low current, before raising the current when there is sufficient voltage across the battery terminals. The charger will also charge Li-ion batteries using a different setting. • Features built in bluetooth, meaning they can be controlled and monitored remotely from smartphones, tablets and laptops • IP22 protection rating • Protects against overheating, reverse polarity and short circuits • Offers Night and Low modes to reduce output current and make the charger totally silent • Operating temperature: -20°C to +50°C • Input frequency: 45 - 65Hz BATTERY CHARGERS

VC REC030001210

VC BPC121542022

One Output

Three Outputs

Volts

Amps

Height mm Width mm Depth mm

VC BPC121542022 VC BPC121544022 VC BPC122042022 VC BPC122043022 VC BPC123042022 VC BPC123044022 VC BPC241642022 VC BPC241644022

12V 12V 12V 24V

15A 20A 30A 16A

235 235 235 235

108 108 108 108

65 65 65 65

• •

IP67 protection rating

Operating temperature: -30°C to +50°C

Part no.

Volts

Amps

Height mm Width mm

Depth mm

VC BPC120731024

12V

7A

60

105

190

VC BPC120731024

55

info@asap-supplies.com

www.asap-supplies.com

01502 716993