example
TINNED MINI CABLE
NON-TINNED MINI CABLE
• •
Red (add -K) or black (add -A) sheath available
• •
Red (add -K) or black (add -A) sheath available Available in 5, 8 or 15 metre lengths
Available in 5 or 10 metre lengths
748711-A
748725-K
Part no.
Size mm 2
Inner colours Conductor
Cable cores
Cable length
Crimp colour
Part no.
Size mm 2
Conductor specifications mm
Cable cores
Cable length
Crimp colour
ELECTRICAL
specifications mm
734811- 734838- 734935-
1 2 2
- -
32/0.2 28/0.3
1 1
15 metres Red 8 metres Blue
748711- 748725-
1.5 21/0.3 2.5 35/0.3
1 1
10 metres 5 metres
Red or blue
Blue
Black and red 2 x 28/0.3
2 (flat) 5 metres Blue
STANDARD BATTERY STARTER / WINCH CABLE • Flexible
TWIN CORE FLAT CABLE - AWG UL approved twin core flat cable designed for boats and the marine environment. The outer jacket is extruded onto the tinned copper wire conductors, filling the voids to make the wiring cable robust and durable, yet easy to strip. • Colour: White • Inner colours: black and red • 30 metre coil
• Red (add -K) or black (add-A) sheath available • Tinned copper temperature rating -30˚C to +70˚C • Non-tinned -15˚C to +70˚C
mm 2
Conductor size mm 203/0.30 322/0.30 455/0.30 315/0.40 637/0.30 475/0.40 912/0.30 684/0.40
Tinned Non-tinned 10 metre Per metre 10 metre 30 metre
748901- 748911- 748921-
-
-
-
16 25 35 40 50 60 70 95
712911-A
733223-L
712910-
712911-
712913
-
-
-
Part no.
AWG
Size mm 2
Conductor specifications mm
-
712920-
712921-
712923
733213-L 733223-L 733243-L 733263-L
16 14 12 10
1.31 2.08 3.31 5.26
65/0.10 41/0.10 65/0.10 105/0.10
748931-
-
-
-
-
712930-
712931- 712941- 712951-
712933
748941-
- -
- -
-
748941-K
CABLE STRIPPER, CUTTER & TERMINAL CRIMPING TOOL
FOUR CORE TINNED CABLE 733411-E • Can be used with Lectrotab units • 4 core • UL listed • 14 AWG • 10 metre coil • For Lectrotab trim tabs, see page 277.
The cable stripper is suitable for use with cables between 0.5mm² and 6mm² and also doubles up as a crimping tool for non insulated and pre insulated crimp terminals.
712015
733413-E
HEAVY DUTY COPPER CABLE CUTTERS
NON-TINNED CABLE STANDARD REFERENCE TABLE
These cable cutters are suitable for cutting through copper cables up to 70mm² in size. The tool measures 235mm in length.
Conductor cross section mm 2
Conductor specification mm 2
Nominal current rating amps
Maximum overall diameter of cable mm
Maximum resistance per metre at 20 ˚ C ohms
712017
0.5
16/0.2 32/0.2 21/0.3 28/0.3 35/0.3 44/0.3 56/0.3 65/0.3 84/0.3 97/0.3 120/0.3 80/0.4 196/0.4 315/0.4 475/0.4
11
1.7 2.1 2.4 2.8 3.4 3.8 4.1 4.3 5.1 5.6 3
0.0371 0.0185 0.0127 0.00942 0.00760 0.00600 0.00471 0.00406 0.00314 0.00279 0.00220 0.00182 0.0008 0.0005 0.0003
TINNED CABLE STANDARD REFERENCE TABLE
1
16.5
Conductor cross section mm 2
Conductor specification mm 2
Nominal current rating amps
Maximum overall diameter of cable mm
Maximum resistance per metre at 20 ˚ C ohms
1.5
21 25 29 33 39 42 50 57 63 70
2
2.5
1.5 2.5
21/0.3 35/0.3 56/0.3 84/0.3 80/0.4 203/0.3 322/0.3 455/0.3 637/0.3 912/0.3
21 29 39 50 70
2.4
0.013
3 4
3
0.00782 0.00485 0.00323 0.00185 0.00126 0.000792 0.000564 0.000403 0.000281
4 6
3.7 4.3
4.5
6 7
10 16 25 35 50 70
6
110 170 240 345 485
8.3
8.5
10.1 11.8 13.3 15.5
10 25 40 60
6
170 300 415
9.8
12.2 14.6
73
info@asap-supplies.com
www.asap-supplies.com
01502 716993
Made with FlippingBook - Online Brochure Maker