example

BUSBARS, POWER POSTS AND CONNECTORS

From simple connector strips to power posts and busbars, we’re certain you will find the power distribution product you need to complete your electrical installation. Products in our range use a combination of metallic materials, such as nickel plated copper, tin plated brass and stainless steel. TYPICAL CONSTRUCTION

Stainless steel screws and star washers

Stainless steel post

These highly conductive materials form the electrical path, whilst stainless steel is used where extra mechanical strength is required (e.g. the last securing nut which holds the complete assembly together). They are available colour coded to match your circuit; red for positive and black for negative.

Stainless steel nut

Tin plated copper busbar

Plated brass conductive nut

Anti-vibration stainless steel washer

POWER DISTRIBUTION POSTS Supplied with insulating cover and disk to comply with ISO regulations regarding continuously energised terminals. • Stainless steel connection post • Glass filled nylon base • 8 screw distribution plate Negative Positive Connection post mm 729211 729212 6 729213 729214 8 729215 729216 10 • Features 12 x 15 amp screw connection points and 1 x 1/4” post • Stainless steel posts, screws and hex nuts • Nickel plated brass base connection plate • Glass filled black nylon base • Supplied with a plastic cover and insulation boot to meet ISO standards for protection of continuously energised terminals Part no. Type Maximum current Posts Connection points Mounting hole centres mm 729261 Negative 240A 1 x 1/4” 12 x 15A 118.4 729262 Positive 240A 1 x 1/4” 12 x 15A 118.4 These “push-on” terminal busbar / power distribution points greatly increase production speed and reduce labour costs. They provide a neat and simple solution for negative or positive cable distribution. • Maximum amperage: 55A @ 12V per tier, 20A per connection • Maximum voltage: 48V DC • Glass filled nylon base • Single 1/4” (6mm) stainless steel connection post with nuts • Single nickel plated brass tab plate features 10, 20 or 30 6.3mm male spade tabs Order cover kit to meet ISO standards for protection of continuously energised terminals POWER DISTRIBUTION BUSBARS WITH COVER AND BOOTS TAB TYPE BUSBARS

ELECTRICAL

729215

729261

729286

10 point 729281 729282

20 point 729283 729284

30 point 729285 729286

Type

Post size 1 x 1/4” 1 x 1/4”

Cover

Yellow cover

729287 729288

729289 729289

Negative Positive

729289

10 POINT BUSBAR

• Busbar / distribution point for DC systems up to 48V DC. • 10 x 15amp (max) screw connection points and 2 x 1/4” posts • Nickel plated brass contact plates • Stainless posts, screws and hex nuts • Glass filled black nylon base Order cover to meet ISO standards for protection of continuously energised terminals

729251

Part no.

Type

Maximum load amps

Intermittent amps

Posts

Mounting hole centres mm

Yellow cover

729251 729252

729259 729259

Negative Positive

150A 150A

20A 20A

2 x 1/4” 2 x 1/4”

131.8 131.8

729259

78

info@asap-supplies.com

www.asap-supplies.com

01502 716993