example

GEARBOX ADAPTOR PLATES We offer a range of SAE bell housing gearbox adaptor plates that will bolt to the engine and gearbox. We cater for many of today’s most popular gearboxes and also offer a range of drive plates to suit, see pages 86-88.

ENGINE SPARES & GEARBOXES

ENGINE BELL HOUSING TO SAE STANDARDS

Below are the details you will need to determine the size of bell housing fitted to your engine.

P C D

208542

208527

208543

Part no. 208551 208580 208543 208532 208542 208585 208586 208552 208526 208536 208546

Model

Description

MT4901S/A MT8083S/A MT4902S/A MT854S/A MT1210S/A MT1426S/A MT1563S/A MT1209S/A MT1212S/A MT1211S/A MT1216S/A MT5030-KIT MT4587S/A MT4588S/A MT4891S-A

Plate adapts SAE 5 to PRM 60, 80, 90, 120, 125 and 150 Plate adapts PRM 60, 80, 90, 120, 125 and 150 to BorgWarner Plate adapts SAE 4 to PRM 80, 90, 120, 125 and 150

Inside Register

Plate adapts SAE 3 to PRM 260 and 280 Plate adapts SAE 4 to PRM 260 and 280 Plate adapts PRM 260 to BorgWarner and 280 Plate adapts BorgWarner to PRM 500 & 750

* PCD = Pitch Circle Diameter. This is determined as shown above.

Plate adapts SAE 5 to PRM 260 Plate adapts SAE 2 to PRM 500, 750 Plate adapts SAE 3 to PRM 500, 750 Plate adapts SAE 4 to PRM 500, 750

SAE number

ID register mm

PCD of bolts

Number of bolts

Bolt size mm (inch) 10 (3/8”) 10 (3/8”) 10 (3/8”) 10 (3/8”)

PRM-MT5030-KIT

2 3 4 5

Plate adapts PRM 750 to BorgWarner Velvet Drive Plate adapts SAE 2 to PRM 1000 (except PRM-1000D4) Plate adapts SAE 3 to PRM 1000 (except PRM-1000D4)

447 409 362 314

466 12 428 12 381 12 333 8

208527 208537

PRM-MT4891S-A

Plate adapts SAE 3 to PRM-1000D4

PRM GEARBOX OIL COOLERS These oil coolers are designed for transmission oil cooling using fresh or sea water as the coolant. The low pressure associated with transmission allows polyamide end caps to be used in place of the more expensive gunmetal end caps or the frail rubber caps normally found on traditional brass tube coolers.

Part no.

Oil circuit port size BSP

Water circuit connections mm

Dimensions mm l x w x h (without bracket)

For PRM gearbox models (Maximum power)

GEARBOX MODELS 150, 260 & 280

PRM-GB50-SSN PRM-GB50-SLN PRM-GB50-LSN PRM-GB50-LLN PRM-GB60-LSN PRM-GB60-LLN PRM-GB60-SSN PRM-GB60-SLN

3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 3/8” 3/8”

28 34 28 34 28 34 28 34

242 x 80 x 86 242 x 80 x 86 242 x 80 x 86

PRM 150D (58kW) PRM 260C / D (92kW) PRM 280 (replaces 260)

242 x 80 x 86 GEARBOX MODELS 500 & 750

271 x 80 x 86 271 x 80 x 86 271 x 80 x 86

PRM 500A / D (130kW) PRM 750A / C / D (130kW)

PRM-GB60-SLN

271 x 80 x 86 GEARBOX MODELS 500, 750 &1000

PRM-GB120-LSN PRM-GB120-LLN

1/2”

28

433 x 80 x 86

PRM 500A / D (130-170kW) PRM 750A / C / D (130-258kW) PRM 1000A / D (Up to 180kW)

1/2”

34

433 x 80 x 86

MOUNTING BRACKET FOR PRM OIL COOLERS

PRESSURE GAUGE FOR PRM GEARBOXES

PRM-D16302210 Mounting bracket designed for the range of PRM GB series oil coolers. Sold singularly. Please note: 2 brackets required to mount each cooler.

PRM-MT5036 Manual pressure gauge for direct fitting to any PRM gearbox.

PRM-D16302210

PRM-MT5036

83

info@asap-supplies.com

www.asap-supplies.com

01502 716993