example

Most replacement moulded rubber end caps are made of neoprene. Usually the part number of the cap you are replacing is embossed on the outer edge to make replacement identification easier. HEAT EXCHANGER & OIL COOLER RUBBER END CAPS

A

FOR KEEL COOLED MANIFOLDS

Part no.

Diameter A mm

Diameter B mm

Description

I.D.

O.D.

I.D.

O.D.

BOW-3419NP BOW-3421NP BOW-2981NP POL-A3-703

51 68

60 80

70 90 45 72

80

Bowman blank end cap Bowman blank end cap Bowman blank end cap Polar blank end cap

103

- -

- -

55 80

B

BOW-3419NP

FOR HEAT EXCHANGER MANIFOLDS

Part no.

Diameter A mm

Diameter B mm

Description

I.D.

O.D.

I.D.

O.D.

BOW-3365NP BOW-3366NP BOW-3367NP BOW-2680NP BOW-3716NP BOW-3187NP

22 28 32 22 32 28 22 28 28 28 50

32 38 42 32 42 38 32 38 42 42 60

51 51 51 51 50 51 53 53 62 78 70

60 60 60 60 60 60 61 61 76 93 80

Bowman straight Bowman straight

A

Bowman straight

Bowman 90˚ Bowman 90˚ Bowman 90˚

ENGINE SPARES & GEARBOXES POL-A3-727 POL-A3-728 B

Bowman straight Bowman straight Bowman straight Bowman straight Bowman straight

BOW-3365NP

POL-A4-670 POL-A3-635 BOW-2736NP

FOR HEAT EXCHANGER MANIFOLDS

A

Part no.

Diameter A mm Diameter B mm Diameter C mm Description I.D. O.D. I.D. O.D. I.D. O.D.

B

BOW-2679NP BOW-3186NP BOW-3251NP BOW-3667NP BOW-3192NP POL-A3-783 POL-A3-636

22 28 22 28 28 22 28

32 38 32 38 42 32 39

51 51 51 51 68 55 63

60 60

70 70 70 70 90 74 85

80 80 80 80

Bowman 90˚ Bowman 90˚

60

Bowman straight Bowman straight

60 80 66 76

103

Bowman 90˚

C

85

Polar 90˚ Polar 90˚

BOW-3667NP

103

MANICOOLER FILLER CAP

MANICOOLER REPLACEMENT ANODE

226923

226920

226920 Seaflow manicooler replacement filler cap. Also known as a pressure cap or radiator cap, this pressure cap is set at 95KPa.

226923 Replacement zinc pencil anode for the Seaflow exhaust manicoolers. You will need one anode per manicooler.

ENGINE EXPANSION TANK

ENGINE EXPANSION TANK

• • • •

Suitable for temperatures up to 100°C

Suitable for use in engine coolant header tank applications and pressurised heating system applications. Supplied without a pressure cap. Construction: Plastic

Construction: Plastic

UV resistant

Supplied with expansion tank bracket

Part no.

For pressure up to

Capacity (litres)

Part no.

For pressure up to Dimensions H x W x D mm

201810

TT-011

0.5 bar

1.7

15 PSI

299 x 210 x 90

201810

TT-011

92

info@asap-supplies.com

www.asap-supplies.com

01502 716993