AG Publications Aquafax Equipment Catalogue

PAINT & VARNISH

www.aquafax.co.uk

MAIN HEADING INTERNATIONAL TOPSIDE FINISHES & UNDERCOATS

SUPER GLOSS 1 Pack Gloss

Area : Above the waterline Finish: High gloss Practical coverage: 12m 2 /lt No of Coats: 1-2 Substrates: GRP, wood, steel aluminium Application: Brush, roller Thinner: No. 1

One-part high gloss yacht finish optimised for roller application • Easy to apply by roller or brush; apply by roller without tipping off to achieve a durable, high gloss topside finish without the hassle. High solid resin technology; low VOC formulation • More paint and less solvent, resulting in reduced odour, reduced emissions and a high solid content that delivers full opacity in just 1-2 coats. Excellent temperature tolerance • Great application characteristics, even at lower temperatures.

COLOUR

750ML

White

5-61080 5-61081 5-61016 5-61019 5-61082 5-61083 5-61028 5-61084 5-61085 5-61037

Black

Whale Grey Ocean Blue

Lighthouse Red Thames Green Bahama Beige

Arctic White Pearl White Atlantic Blue

White

Black

Whale Grey Ocean Blue Lighthouse Red

Thames Green Bahama Beige Arctic White Pearl White Atlantic Blue

MATTING ADDITIVES Matting additives can be added to both International finishes and varnishes; and depending on the mix ratio between the product and the additive, a variety of gloss, satin or matt effects can be achieved. International produces two types of matting additive, suitable for use with either the one-part or two-part products in the range. Area: Above the waterline Thinner: No.1 Application: Brush, Roller, Conventional Spray (professional spray application only)

INTERNATIONAL ONE UP One UP from International is a single-pack primer/undercoat for use above the waterline with all International one-pack finishes and deck paints. Easy to apply by brush and roller, One UP can be used on all substrates and provides an extra smooth finish reducing the amount of sanding and time required. Thinner: Thinner No.1

255

Number of coats: 2-4 coats of 100μm (WFT) Practical coverage: By brush/roller 9.0m2/L Application method: Brush and roller Typical shelf life: 2 years Substrate compatibility: Suitable for all substrates

COLOUR

PART NO. 5-60428 5-60427 5-60425 5-60426

DESCRIPTION

PART NO.

White 375ml White 750ml

5-60524 5-60501

One Pack Matting Additive 750ml Two Pack Matting Additive 750ml

White 2.5L

Blue/Grey 750ml

PAINT & NON-SLIP COATINGS

INTERDECK ® Non-Slip Coating • Slip resistant polyurethane deck paint. • Contains fine mineral additive for hard wearing, non-slip surface. • Suitable for all substrates. • Low sheen finish prevents sunlight dazzle. • Apply straight from the can with brush or roller. Area: Above the waterline. Finish: Low Sheen Practical Coverage (m²/Lt): 9.5 No. of coats: 1 - 2 Substrates: GRP, Wood*, Steel*, Aluminium* (*over suitable primers) Application: Brush, Roller Thinners: No.1

DANBOLINE BILGE & LOCKER PAINT • Hard wearing coating for bilges, lockers and bulkheads. • Chemical resistance to fumes, fuel and oil.

• High opacity for thorough coverage. • Cleans easily for reduced maintenance. Area: Above and below the waterline. Finish: High Sheen Practical Coverage (m²/Lt): 11.0 No. of coats: 1 - 2 Substrates: GRP, Wood*, Steel*, Aluminium*

White 5-60272 Squall Blue 5-60273 Cream 5-60274 Grey 5-60275 Sand Beige 5-60275 COLOUR 750ML

(*over suitable primers) Application: Brush, Roller Thinners: No.1

Grey 5-60525 5-60526 White 5-60527 5-60528 COLOUR 750ML 2.5 LITRE

Grey

White

White Squall Blue Cream Grey Sand Beige

NON-SLIP ADDITIVE

Silica sand non-slip aggregate for a range of coating schemes. To be added to the top coat to give a non-slip surface profile. 500g Part No. 5-60555 NON-SLIP AGGREGATE

A synthetic, granular material that can be added to topside finishes prior to application or sprinkled onto wet paint as an aid to providing a more slip-resistant finish. As with the matting additives, the final result is determined by the amount of material added into the finish. 20g Part No. 5-60550