AG Publications Aquafax Equipment Catalogue

PAINT & VARNISH

www.aquafax.co.uk

MAIN HEADING INTERNATIONAL VARNISHES

PERFECTION PLUS Two-Pack Polyurethane Varnish • Ultimate performance, clear, two-part polyurethane varnish. • Chemical cure for the hardest finish and highest abrasion resistance. • Superior gloss lasts four times longer than conventional one-part varnishes. • Professional quality results made easy. • 2:1 mix ratio: Easy to measure and mix. Finish: High Gloss No. of coats: 2 - 5 Practical Coverage (m²/Lt): 12.0 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush, Roller Thinners: No.9 UV Protection/Gloss Retention: For a satin finish add 5-60501 Matting Additive

GOLDSPAR ® SATIN One-Pack Varnish • A satin finish polyurethane varnish for interior use. • Resistant to hot water, mild acids and alkalis. • Fast-dry formulation minimises dust contamination. Finish: Satin No. of coats: 3 Practical Coverage (m²/Lt): 10.30 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush, Roller Thinners: No. 1 (Brush/Roller) No. 3 (Spray) UV Protection/Gloss Retention: For interior use only

5-60283 5-60284 5-60285 375ML 750ML 2.5 LITRE

5-60701 5-60702 750ML 2.5 LITRE

COMPASS

One-Pack Varnish • Fast-dry, high durability, polyurethane high gloss varnish. • Excellent resistance to abrasion, oils and chemicals. • Fast-drying, apply 2 coats per day, sand

SCHOONER ® One-Pack Varnish

• Premium quality, traditional tung oil varnish with excellent UV protection. • Rich golden colour and deep gloss. • Good flow-out and self-levelling characteristics for easier application. Finish: High Gloss No. of Coats: 4 - 6

only after 2-3 coats. • Light amber colour.

• Contains HALS and UV absorbers. Finish: High Gloss No. of coats: 3 - 5 Practical Coverage (m²/Lt): 12.9 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush, Roller, Spray Thinners: No. 1 (Brush/Roller) No. 3 (Spray) UV Protection/Gloss Retention: For a satin finish add 5-60500 Matting Additive WOODSKIN A flexible wood oil/varnish hybrid that acts like a skin for your wood. Microporous properties allow Woodskin to breathe with your wood; tiny holes let the paint film expand and contract but are small enough to repel water; the cause of mould and mildew. • Easy to apply; no need to thin or sand between coats. • Good flow and levelling. • Dries to a subtle, translucent sheen. • Penetrates deep into your wood, leaving a thin surface film that will not crack or flake. • Minimal maintenance; simply clean and reapply season after season. • The natural teak colour compliments any wood type. Finish: Satin No. of coats: 3 Theoretical Coverage (m²/Lt): 10 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush Thinners: Do not thin UV Protection/Gloss Retention: 5-60290 750ML 5-60286 5-60287 5-60288 5-60289 375ML 750ML 2.5 LITRE 5 LITRE

256

Practical Coverage (m²/Lt): 14.3 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush, Roller, Spray Thinners: No. 1 (Brush/Roller) No. 3 (Spray) UV Protection/Gloss Retention: For a satin finish add 5-60500 Matting Additive • Traditional, general purpose gloss varnish. • Good flow, flexibility and gloss retention. • High clarity finish for light colour woods. • Interior, exterior and over existing varnish. Finish: Full Gloss No. of coats: 3 Practical Coverage (m²/Lt): 11.7 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush, Roller, Spray Thinners: No. 1 (Brush/Roller) No. 3 (Spray) UV Protection/Gloss Retention: For a satin finish add 5-60500 Matting Additive ORIGINAL One-Pack Varnish

5-60277 5-60278 5-60279 375ML 750ML 2.5 LITRE

5-60280 5-60281 5-60282 375ML 750ML 2.5 LITRE

UV Protection/Gloss Retention Ratings: Good Outstanding

Visit www.international-yacht.com for data sheets. Other pack sizes may also be available for some products.