AG Publications Nova Leisure Catalogue 2021

- Electrical, Lighting & TV

Inverters & Chargers - Victron

Victron BMV-702 Battery Monitor (Black / 9V to 90V) The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account. Next to the basic display options,

Victron BMV-700 Battery Monitor (Dashboard Mount) The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account. Next to the basic display options,

such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts. The BMV-702 features an additional input which can be programmed to measure the voltage (of a second battery), battery temperature or midpoint voltage. Easy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting. Midpoint voltage monitoring (BMV-702 only) This feature, which is often used in industry to monitor large and expensive battery banks, is now for the first time made available at a low cost, to monitor any battery bank. A battery bank consists of a string of series connected cells. The midpoint voltage is the voltage halfway along the string. Ideally, the midpoint voltage would be exactly half of the total voltage. In practice, however, deviations will be seen, that depend on many factors such as a different state of charge for new batteries or cells, different temperatures, internal leakage currents, capacities and much more. Large or increasing deviation of the midpoint voltage, points to improper battery care or a failed battery or cell. Corrective action following a midpoint voltage alarm can prevent severe damage to an expensive battery. VV-024

such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts. Easy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting. VV-032

Victron Smart Bluetooth Dongle for VE.Direct

Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the Victron Connect app. View information wirelessly such as battery status and solar panel power, plus other useful data. The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers. VV-113

Victron Patch Lead 5m (Network Cable)

Victron BMV-712 Smart Battery Monitor (9-90V)

Use this to connect your Victron Phoenix Multi or Multi Plus to the remote control panel. 5 Metre lead. VV-017

With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance. Can be used with the Victron Bluetooth app on your smartphone or other device to customise settings and monitor data. VV-112

Victron Patch Lead 10m Cat5e UTP (Network Cable)

VV-018

Victron Battery Protect BP220 (220 Amp / M8 Stud)

Victron Wall Bracket for BMV & MPPT Control Genuine Victron wall mount enclosure for BMV-70x and MPPT controllers. Allows the displays for these items to be surface mounted. VV-114

This unit disconnects the battery from non-essential loads before it becomes completely discharged. It can be set to disconnect at several different voltages and a digital display is built in to indicate what setting has been selected. An alarm signal is also built in that can be used for an external buzzer/

warning light, this alarm is triggered 90 seconds before disconnect. The unit automatically detects the system voltage (12V/24V) and has over-voltage protection built in. Continuous load rating 220A. NOTE: The battery protect can be used with all types of battery technology. VV-130

Tel: +44 (0)2476 390112

Fax: +44 (0)2476 390110

www.novaleisure.com Nova Leisure

119