AG Publications Specialist Vehicle V2

Specialist Vehicle & Van Conversion Catalogue Issue 2

Batteries / Batteries & Accessories

Albion DC27MF Dual Purpose Battery 90Ah Sealed Lead Acid

Albion MF31-850(L) Dual Purpose Battery 105Ah Sealed Lead Acid

Albion MF60038(L) Dual Purpose Battery 100Ah Sealed Lead Acid

Product Code: AR-DC27MF

Product Code: AR-MF31-850

Product Code: AR-MF60038

Albion DC27MF Maintenance free battery, 12V. Suitable for general purpose domestic/leisure applications, can also be used for engine starting. No maintenance to electrolyte levels required. • 90Ah C20 • 680A CCA (EN) • Terminal: Tapered post, positive left, negative right plus M8 stud • 2 year warranty • Weight: 21Kg • H x W x D (mm): 220 x 302 x 172

Albion MF31-850(L) maintenance free battery, 12V. Suitable for light duty domestic/leisure applications, can also be used for engine starting. No maintenance to electrolyte levels required. • 105Ah C20 • 720A CCA (EN) • Terminal: Tapered post, positive left, negative right • 2 year warranty • Weight: 25Kg • H x W x D (mm): 245 x 332 x 174

Albion MF60038(L) maintenance free battery, 12V. Suitable for light duty domestic/leisure applications, can also be used for engine starting. No maintenance to electrolyte levels required. • 100Ah C20 • 750A CCA (EN) • Terminal: Tapered post, positive right, negative left • 2 year warranty • Weight: 23Kg • H x W x D (mm): 190 x 354 x 174

4/15/30/45 pallet quantities available

4/12/24/36 pallet quantities available

4/12/24/36 pallet quantities available

Victron VE.Bus BMS Battery Management System

Victron BMS 12-200 Battery Balancer

Product Code: VV-160

Product Code: VV-162

This unit is a protective device acts as the hub and safety net for your Victron lithium battery system. Connects to Victron’s lithium batteries and enables the entire battery bank to be protected against over/under voltage and over temperature. It connects to the daisy-chain connectors on the batteries which enables it to monitor each cell individually. It also connects to a Victron Multiplus, Quattro, Phoenix inverter or Phoenix charger via an RJ45 data cable. It is also used to control a Cyrix Li-ct or a Cyrix Li-charge relay to disconnect the charger/load in the event of under/over-voltage and over-temperature. In a deep discharge situation the VE Bus connection enables loads to be disconnected via Victrons “Battery Protect” before the battery becomes discharged so deeply that the BMS needs to disconnect it, that level can be set with a BMV.

This unit is a protective device that connects to Victron’s lithium batteries and enables the entire battery bank to be protected against over/under voltage and over temperature. It connects to the daisy-chain connectors on the batteries, and between the starter and domestic battery where an alternator is being used for charging. The device’s purpose is to protect the Li-ion batteries in the event of under/over-voltage and over-temperature by electronically disconnecting them when the charge voltage is too high or the battery voltage becomes too low. It limits the charge power from the alternator to prevent overheating, particularly while running on lower rpm and will also prevent the Li-ion battery discharging into the starter battery to prevent excessive discharge. It also prevents the load from taking power from the starter battery.

NOTE: This product is specific to lithium installs.

NOTE: This product is specific to lithium installs.

126

Browse our full range online novaleisure.com