AG Publications Specialist Vehicle V2

Specialist Vehicle & Van Conversion Catalogue Issue 2

Batteries / Accessories

Victron Battery Protect BP220 (220 Amp / M8 Stud)

Victron Cyrix Li-CT 120 Amp Battery Combiner Relay (VSR)

Victron Cyrix Li-CT 230 Amp Battery Combiner Relay (VSR)

Product Code: VV-130

Product Code: VV-164

Product Code: VV-165

This unit disconnects the battery from non-essential loads before it becomes completely discharged. It can be set to disconnect at several different voltages and a digital display is built in to indicate what setting has been selected. An alarm signal is also built in that can be used for an external buzzer/warning light, this alarm is triggered 90 seconds before disconnect. The unit automatically detects the system voltage (12V/24V) and has over voltage protection built in. Continuous load rating 220A. NOTE: The battery protect can be used with all types of battery technology.

This is a voltage sensitive relay that connects a LiFePO4 battery to the starter battery when the alternator is charging. It communicates with a BUS BMS unit and will disconnect the LiFePO4 battery from charging if the BMS unit senses over/ under voltage or temperature, and/or the starter battery voltage drops below 13.2V, i.e. the alternator is no longer charging. Current rating 120A. NOTE: This product is specific to lithium installs.

This is a voltage sensitive relay that connects a LiFePO4 battery to the starter battery when the alternator is charging. It communicates with a BUS BMS unit and will disconnect the LiFePO4 battery from charging if the BMS unit senses over/ under voltage or temperature, and/or the starter battery is no longer being charged, i.e. the alternator is no longer charging. Current rating 230A. NOTE: This product is specific to lithium installs.

Victron Cyrix Li-charge 120 Li-ion Battery Combiner (VSR)

Victron Cyrix Li-charge 230 Li-ion Battery Combiner (VSR)

Sterling Digital Battery Tester

Product Code: VS-410

Product Code: VV-167

Product Code: VV-168

12V digital battery tester with LCD display. Suitable for all lead acid variants including AGM, GEL and Carbon. 6 operation languages, English, German, French, Spanish, Italian and Polish. Ten testing standards (CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB). Test results provide “state of health”, “state of charge”, “voltage”, “CCA”, “internal resistance”, battery rating and a user battery review. Three test modes, “in vehicle”, “out of vehicle”, “quick test”. Also includes a cranking and charging test. Data can be downloaded to a PC via a mini USB cable (not supplied). Each battery can be tested individually without disconnecting it from the bank.

This is a voltage sensitive relay that connects a LiFePO4 battery to a battery charger when it senses charging is active. It communicates with a BUS BMS unit and will disconnect the LiFePO4 battery from charging if the BMS unit senses over/ under voltage or temperature. It will also disconnect the charger (such as a solar regulator) if the voltage drops below 13.5V i.e. the charger is no longer charging. Current rating 120A. NOTE: This product is specific to lithium installs.

This is a voltage sensitive relay that connects a LiFePO4 battery to a battery charger when it senses charging is active. It communicates with a BUS BMS unit and will disconnect the LiFePO4 battery from charging if the BMS unit senses over/ under voltage or temperature. It will also disconnect the charger (such as a solar regulator) if the voltage drops below 13.5V i.e. the charger is no longer charging. Current rating 230A. NOTE: This product is specific to lithium installs.

127

tel: 02476 390112 email: sales@novaleisure.com