BodyshopSolution_Magazine-3_ROI_A4_June2023-2 Flipping Book

First page 1 Next page Last page

Bodyshop Equipment Trade only 1 st August – 31 st October 2023

Unlock your body repair potential with paintless dent repair bundles

2 3 6 8

Pre-Inspection

Dismantling

• Cold Glue Dent Pulling Kit PDR • PDR Line Board – Flexi 800mm • Glue Gun – Butane • Slide Hammer with 12 Glue Pads • Solvent Spray for Hotmelt Glue • Rainbow Pack of Multipads 4pc • Glue Sticks 15pc • Mini Precision Hammer Set • Lift & Pull Dent Kit Platinum Glue PDR Kit 17pc LAS92682 • Pulling Shaft – 180mm • Heavy DutyToolbag 18” • Mini Plastic Scraper Chisel • Hot Air Gun • Paintless Dent Puller Tool Set • Digital InfraredThermometer • Tap Down Tool Kit, Aluminium • Plastic Razor Blades 100pc.

Preparation

Dent Pullers

10 11 12 13 14 15 16 17 21

Pulling Towers

Plastic Repair

Spot Welders / Welders

Riveters / Weld Fume Protection Spray Gun Cleaning / Anti Static

Recycling

Spray Guns / Finishing Tools

Take control of your energy consumption

Exclusive to LKQ customers

UV Paint Curing / I.R. Paint Curing

Karcher Cleaning 22 Milwaukee Power Tools 26 Air Conditioning 28 Garage Equipment 30 Wheel and Tyre 32 Car Lifts 33 Compressors 34 Diagnostics 35 Intelligent Repair 40 Wheel Refurb 44 Windscreen Repair / Spray Booth 45 Alignment 46 ADAS 47 Training 48

€ 818 .00

Find more on page 47

Sustainability Heroes

Pneumatic Aerosol Crusher 279770140

• 4 aerosol capacity (2 or 4 at a time) • Pierces aerosol • Gases absorbed by filtration

• Up to 80% compaction • Cans can be recycled as non-hazardous waste!

• Safety interlock • Max aerosol size 260mm height • Reduced hazardous waste storage.

€ 1,985 .00

Find more on page 15

Prices in this catalogue are subject to change and subject to stock availability. Branches nationwide

autoclimate TM

Pre-Inspection

Lighting

Scangrip Sunmatch 4 Colour Match/ Inspection Lamp 597995330

Scangrip Multimatch R Colour Match/ Inspection Lamp 274770359

3 YEAR WARRANTY WARM COLD

3 YEAR WARRANTY

2500K

6500K

ALL DAYLIGHT – 5 STEP

• Rechargeable colour- matching/inspection light • 4th generation • NewCCT scan function • 500 lumen • Inspection spotlight.

• Handy and powerful work light for inspection and detailing providing up to 1200 lumen • MULTIMATCH R features

WARM COLD

2500K

6500K

ALL DAYLIGHT – 5 STEP

CCT SCAN – STEPLESS

the outstanding ALL DAYLIGHT function, providing you with the option to choose

between 5 different colour temperatures depending on the job • The lamp is easy to carry and is ergonomically designed for a good grip on the handle.

CCT SCAN – STEPLESS

€ 132 .39

€ 119 .54

Scangrip Nova-R Inspection/Detailing Kit 281775041

Scangrip Bonnet C+R Detailing Lamp 274770320 • Line Light providing extremely powerful illumination

3 YEAR WARRANTY

The ULTIMATE kit is your go-to-kit for effective detailing and colour matching. The Ultimate kit includes: • Matchpen R • I-Match 2

Under- bonnet, Interior

• 1400 lumen of a vehicle interior or recessed area • Supplied with an adjustable telescopic holder with soft- padded hook ends providing a firm and scratch-free grip • Detach the power cable and use as an inspection light.

• Sunmatch 3 • Multimatch 3 • The bag.

€ 433 .22

€ 142 .30

Price, availability and specification may change without prior notice. Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded. Order parts online, head to www.omnipart.com. Offers valid 1st August – 31st October 2023. Prices correct at time of going to press: July 2023.

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Dismantling

Plasma Cutters

Easycut 40 Plasma Cutter with Consumables Pack 597772931 • Flameless cutting of steel, stainless steel, aluminium, brass and copper • Clean cut steel 15mm – aluminium 12mm • Max cut steel 20mm – aluminium 15mm • 240v – 13amp supply • Supplied with 4m torch and 2m earth clamp • Comes with free consumable pack.

Cut all types of metal easily and with precision

€ 745 .00

Infinium Air Plasma Cutter 40 DV 597995370 • Featuring built-in compressor – take it wherever the job is! • Non-HF Pilot Start • Dual voltage • 12mm clean cut.

5 YEAR WARRANTY

€ 1,499 .00

3 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Dismantling GYSDuction Proliner 597771240 Induction Heaters

GYS Powerduction 37LG Supplied with Coolant 597773141 • Fast direct heat to the heat of the metal • Liquid cooled for regular use within the workshop • Heats M10 bolt in 1 second • High power 3700W– from a 240v 13A plug • Suitable for heating steel, aluminium, copper. Regular use in busy shops

Ideal package for car body repair, supplied with accessories to carry out the full range of tasks. • Body Inductor – easily remove adhesive and strips, side mouldings etc. • Glass Inductor – peel off welded metal sheets, burn off stoneguard protoction with the scraper. • Bolt Inductor – release mechanical parts. • Dent Pulling inductor – repair small dents. • Spiral Inductor – release mechanical parts.

€ 2,549 .00

GYS Powerduction 37LG With Trolley 597993180

€ 2,199 .00

€ 3,099 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Dismantling

Induction Heaters

GYS Powerduction 10R 590777030 • Lightweight but robust induction heater for everyday use • Just 3.5 kg – no need for a trolley • Quick and easy to use – select and install the inductor, connect, and you're ready to go • 1200W output power with high duty cycle – will stand up to daily use in the workshop • Supplied with 5 inductors.

Telwin Smart Inductor 5000 Deluxe Package 597775841

Occasional use in smaller shops

Safe alternative to heating with a naked flame Releases seized bolts, glow plugs, steering joints, etc

• Intelligent solution for speeding up and simplifying the removal of glued (windows, rear windows, plastic parts, stickers, glass roofs, interior and exterior trims, etc.) or blocked (bolts, bearings, gears, etc.) parts from vehicles as well as for repairing hail dent • It adjusts its intensity in an intelligent and completely automatic manner (Smart Power) using an innovative AutoCheck microprocessor system.

Heats up A M10 bolt in 10 seconds!

€ 679 .00

€ 2,399 .00

Stanner i4-S Induction Heater With Trolley 597993150

GYS Powerducton 39LG With Trolley 597990300

High quality portable induction heater for heating of seized parts on vehicles of all sizes. • Works on all steels, aluminium & copper • Easy controls allow power control from 5 – 100%, from a 240V 13A plug • Non contact heat source, heating only the required area protecting surrounding areas and/or parts • Water cooled to give excellent duty cycle.

• Larger 7 litre coolant tank for regular use within a workshop, fast fit centre or body shop • Wide frequency range makes it ideal for heating both thin and thicker material • High power 3700W– from a 240v 13A plug • Suitable for heating steel, aluminium, copper.

Constant use large shops

€ 3,699 .00

€ 3,799 .00

5 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Preparation

Rotating Mobile Panel Stand STR.ROTATESTAND

Panel Stand STR.PANELSTAND25

Wheelmaster – Holds Four Wheel for Repair STR.WHEELMASTER

Call for a quote

Wall Bumper Stand STR.WALLBUMPERSTAND

Floor Bumper Stand STR.FLOORBUMPERSTAND

Call for a quote

9 Piece Sanding Block Kit With Case STR.SANDBLOCKKIT

Aluminium Dust Extractor 597995310

• Designed for aluminium repairs • Suitable with all types of pneumatic commercial sanders • ATEX Rated Category 3 Group II • Supplied with earth lead to dust bag and 5m hose.

Call for a quote

Professional Spraygun Cleaning Kit 21 Piece STR.SCK-22

€ 1,249 .00

Call for a quote

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Preparation Mobi-Lift Mk2 Vehicle Lift LAS92340

Mobi-Lift Total Lift LAS92200

Fits over the existing forks on a Mobi-Lift and allows for lifting on the sill as it spreads the weight over a bigger area, minimising the risk of damage. • For use with Mobi-Lift (Part No. LAS92340) • Slides over existing wheel forks • Dissipates the force applied so that it can be used to lift a vehicle by the sill as opposed to the jacking point.

The Mobi-Lift is designed for lifting a vehicle sideways, allowing for mechanical repairs, bodywork or repainting. The compact design with a single movable column including various fittings to suit different types of work makes this an ideal lifting solution, especially where space is limited. • Max vehicle weight 2500kg; safe lifting capacity 1250kg (one side of vehicle). Overall size: 900 x 600mm • Handlebar for easymanoeuvrability into required position • Maximum lift height: 980mm • Max wheel diameter: 18” • 240V, 3 pin UK plug • CE compliant • Made in Germany.

€ 1,512 .00

€ 247 .00

Axle Stands 2 Tonne Pair LAS5073

Hy-Jacks Pair LAS92438

• Pair of hydraulic vehicle positioning jacks easily fit around tyres lifting the car in seconds, allowing vehicles to be easilymoved into required position • Due to their size, these Hy-Jacks are a great mobility solution for use in tight areas or for immobilised vehicles.

A pair of axle stands rated at 2 tonne each and constructed of strong steel with steel welded feet and safety locking pin to prevent accidental release. • Capacity: 2 tonne each • Min/max height: 265 – 415mm • Angled teeth for safety • Safety locking pin to prevent

accidental release • Steel welded feet.

€ 46 .00

€ 316 .00

7 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop Dent Pullers Combi Steel/Alu Dent Puller Package 278770490

Steel and Aluminium

Complete Steel and Aluminum Dent Pulling System. Includes Digital Steel Welding, Aluminium Stud discharge welder, and all dent pulling accessories on a professional easy to manage trolley. Designed to give many years of professional use.

• Professional trolley • Steel welder • Alumintum welder • Double foot pull sot • Strong-arm puller • Quick pull system • Mini Pull System • Extra Long Pull-bar

• Accessories Kit • Slide Hammer.

€ 4,849 .00

Alu Arc Pull Dent Puller Add-on 278770480 Easily expand into aluminium dent pulling with an Alu Arc add-on to your existing steel package. • Micropocessor-controlled aluminium dent repair system • Arc technology enables welding to hook washers and studs quickly and precisely • Welding current can be adjusted • Supplied with 50 flat hook washers for alu dent pulling.

€ 1,549 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop Dent Pullers Propull 2 Steel Dent Puller Package 597779430

Steel

• Professional Dent Stantion for steel – 240V • Touch-senstivie welder with Auto settings • Contact welding – gives quick and precise control • Bright, easy-to-read display • Comes complete with everything for professional panel repair.

€ 3,399 .00

T-Spot 110 2.5kVA Digital Multi Function Dent Puller 278770470

Trolley for T-Spot Dent Puller 281770651

• LCD Graphic Display • Multifuctional Gun • Earth Lead

• Slide Hammer • Accesorries Kit.

€ 1,199 .00

€ 214 .00

9 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop Pulling Tower Pulling Tower LAS92657 A fast, easy to install pulling tower with a height adjustable mechanical hoist (extension pole available to raise height for commercial vehicles 92659). Ideal for use on steel and aluminium panel repair. Designed to reach a pulling traction force up to 550kg, it is counterbalanced by an anchoring plate / suction pad, which features a vulcanised rubber pad and is held onto the ground using the workshop air supply, allowing it to be used anywhere on the workshop floor without the need to drill in any anchor points or fixings. It is supplied with a claw hook for use with weld on squiggly wire, Miracle System bits, glue pads, weld-on tack & pull plates and various other applications.

Pole Exension For PullingTower LAS92659

A steel extension pole specifically for use with the Power-TEC PullingTower (Part No. 92657), which adds an additional 700mm with 7adjustable height positions and allows the tower to be used on truck and van roof panel repairs.

Vertical Pull Kit For PullingTower LAS92660 € 253 .00

An additional anchoring plate / suction pad specifically for use with the Power- TEC PullingTower to allow for the tower to be used in a vertical position such as pulling down on damaged floor pans or sills.

€ 1,150 .00

Excalibur Tower Puller 278770430 € 356 .00 Ask for Demo

T-Raction 250 Tower Puller 281770610

• Innovative traction tower with compressed air operation • Frees professionals from the risks and limitations of traditional systems • Using compressed air ensures perfect adhesion to the floor without the need for additional support or fixing points • Ensures versatility and speed, reducing process times • Pulling capacity.

• A chain pull system for body shop repairs that thanks to its pneumatic vacuum system anchors to the ground without the need for fixings • Under the support base there is a special seal rubber that adheres to any type of floor allowing tractions up to 2,500 kg and an operating pressure from 4 bar up • It is the ideal solution for spot repair interventions for bodybuilders who need to carry out rapid interventions on all types of panelling from the car sill to the uprights, from the doors to the wheel arches, etc. In short to all those who want to reduce repair times and thus avoid the delivery of courtesy vehicles.

€ 1,579 .00 Includes set-up and operator training

€ 1,449 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop

Plastic Repair

Plastic Repair Kit Rechargeable LAS92549

Mini Plastic Repair Welder LAS92517 Mini plastic welder suitable for almost every plastic type used in the automotive industry, can be used with compressed air or nitrogen. • Compatible with almost every plastic type used in the automotive industry • Compact entry level plastic welder can be used with compressed air or Nitrogen.

Cordless plastic repair kit, including welding tip hot stapling function, welding rods, wire mesh, stand and USB charging cable.

€ 103 .00

Airless Welder LAS92661 A mains powered airless plastic welder suitable for use on thermoset plastics such as polyurethane (PUR). Ideal for repairing vehicle bumpers etc, when used together with PUR plastic welding rods which are available separately.

€ 988 .00

€ 160 .00

Nitrogen Plastic Welder With Generator LAS92452

Stanners Plastic Fusion System 274770168

Plastic welder with its own Nitrogen generator, that eliminates the need for a nitrogen gas bottle. Workshop compressed air is used to maintain consistent temperature between welds — the nitrogen is only activated when pulling the trigger so that it’s not wasted between welds. Makes repairs that are stronger than any two-part epoxy or hot air weld. The plastics are melted together, with no oxidation, to form the strongest possible weld.

Ideal for repairing broken plastic parts, from splits in bumpers, broken tabs and mounting brackets, cracked motorcycle fairings and much more! With 2 torches, one for inserting hot staples for rebuilding and reinforcing broken plastic as well as a hot iron for melting larger cracks – the other torch for melting filler plastic to the cracked workpiece.

€ 3,737 .00 combustion and therefore without emitting fumes: • 230v, 50Hz, 1600w, 20-650°C • Made in Italy. • Compatible with almost every plastic type used in the automotive industry • Has it’s own nitrogen generator which eliminates the need for a gas bottle • Allows the welding of filler material by heating with nitrogen • The welder comes complete with a set of plastic consumables including a scraper and roller to finalise the repair • Heats plastic without

€ 2,299 .00

11 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop

Welders Weldstar Infinium Multiprocess Inverter 277771380

Jasic Mig/Mag MMA Multiprocess Inverter 277771390

5 YEAR WARRANTY

4-in-1 MultiprocessWelder (MIG/MAG Synergic, MIG/MAG Pulse, MIG/ MAG Standard, TIG AC/DC (HF/Lift), MMA AC/DC, MMA AC/DC Pulse) with user friendly 5” LCD interface. • Automatically detects input voltage 110V or 230V (PFC technology) • Easy to set up different welding modes, with auto-detection capabilities e.g. weld material thickness ensuring optimal performance save up to 10 stored programmes • Smart fan – reduces power consumption and intake of dust and fumes • Supplied with MIGTorch, TIGTorch, Regulator. 2-wheel Trolley available as optional extra. Trolley for Infinium Welder 281770641

High performance compact MIG/MAG/MMA 200A inverter with digital/AV display, ideal for general shop duties. • Use with 0.6, 0.8 and 1.0mm welding wire • Delivers consistently reliable performance for highly demanding and repetitive weld cycles • 1Phase (230V) input • Supplied with MIGTorch, Regulator, Work return lead and clamp.

€ 229 .00

€ 1,149 .00

Spot Welders Stanners Expert Spot Welder 597770720 • The Spot Expert has an easy to use operator panel and exceeds BSI0125 spec • The 5m lightweight cable gives increased reach and comes as standard with a 14,000A transformer X • Gun (other arm sets available), Suitable for Mild, High Strength, Ultra High Strength Steel, Boron, USIBOR • All the benefits of transformer gun • Simple to use and will incur less servicing costs over its lifetime technology without the expense of recordability • Simple to use and will incur less servicing costs over its lifetime. € 1,599 .00

Tecna Inverter Cable Spot Welding Station 277771410

5 YEAR WARRANTY

14000A output Spot Welder with silenced water cooled transformer. Comes with all major manufacturer approvals. • Runs on Tecna Smart Plus software for fully automatic welding, data is support is achieved with a balancer system for zero gravity operation • The EasyChange systemmakes swapping welding arms very quick and easy • Supplied with C-Type Fast Gun. downloadable via USB • Precision welding gun

Single side gun and arms kits available as optional extras, ask for details.

€ 10,699 .00

€ 13,949 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Panel Shop

Prospot PR8 Battery Operated Riveter 277770910 Riveters • Jaguar Land Rover approved • Set EXACT FORCE within the tool’s 20-80kN range • Data logging captures proof of quality work • Set warning tones to alert of incorrect rivet set • Supplied with standard die kit, other dies available.

Applications: • Self Piercing Rivets (SPR) • Flow Form Rivets (FFR) • Break-Stem Fastener (BSF) • Threaded Nut Rivets (TNR).

€ 9,349 .00

Weld Fume Protection

FEXP-230 MobileWeld Fume Extractor 597992810 • 180 m 3 /hr max airflow • Metal pre-filter to stop sparks • Automatic start/stop for maximum efficiency • Mounted on 360 degree

MINI90 PortableWeld Fume Extractor 597992860

Gysmatic 9/13 XL True Colour Air Fed Helmet 276770394 • Equipped with an air-purifying, respiratory-protection system to assist in air ventilation • 2-in-1 protection • Protects the eyes from IR/UV light during welding operations • Protects from weld fumes • Supplied with charger, shoulder harness and flowmeter.

Portable unit for extracting and filtering light welding or soldering fumes. Equipped with activated carbon filters and a hose and funnel. The ready-to-use solution for light-duty bench and precision work. • Comes with carry-handle • 20 Kg total weight • Portable, carry easily from job to job.

castors for easy manoeuvrability • Supplied with 2.5m hose and a nozzle with magnetic base.

€ 1,369 .00

€ 1,099 .00

€ 499 .00

13 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Paint Shop

Spray Gun Cleaning

Edition 35 597990340

Edition 35 Compact Solvent Based 279770010 Water Based 279770030

Celebrating 35 years of Unic International, the new Edition 35 range boasts advanced spray cleaning technology and a class leading build quality with a larger cleaning area in a smaller footprint. New ergonomic dynamics and superior filtration for gun-wash life extension. The Edition 35 range is your premium cleaner for any paint mixing room.

• Timed operation • Automatic wash • Mini blue filter • Cleaner fluid, cleaner spray guns • Up to 75% increased life in gun wash • Up 75% reduction in gun wash waste • 5 year pump warranty • Easy locate system • Air extraction (solvent model only) • Stainless steel wash tank • Superior inline filtration for gun wash life extension, Mini Little Blue Filter. Technical information: • Height : 1020mm • Width: 440mm • Depth: 350mm • Weight: 28kg • Air Input:50-100psi/ 3.45-6.8 bar • Air Connection: 1/4”BSP. € 1,249 .00 EACH

• High power cleaning up to 20ltrs per min • Patents pending • New ergonomic washing height • 5 year pump warranty • Superior inline filtration for gun wash life extension • Gas strut supported lid • Suitable for gravity and suction fed guns • Automatic, manual and clean rinse facilities • Other configurations available (LowVOC, single station).

€ 3,899 .00

* Installation and Training charged separately.

Anti Static

Ionstar 2022 Ionised Airgun ATEX Approved 597993310 • Neutralises static and cleans in one operation • Once connected to the compressed air system, it generates the necessary energy via an integrated turbine generator built into the air gun, creating a powerful stream of positive and negative ions • Requires no power cables or battery-packs.

Starfinish Ion-tech Anti-static Gun 597991950

• Attach to an air-hose and blow the vehicle down immediately before applying paints or primers – It’s that simple!

• Working on a car in a paint shop builds-up a static charge across the vehicle surface. Rubbing down, wiping down and even touching the car can cause static build-up • This static electricity can cause the metallic particles in automotive paint to settle unevenly while also attracting dust and other small particles which can impact the quality of your finish • The Star Finish Anti-Static gun neutralizes the ions which cause static electricity, allowing you to maximize the quality of your paint job.

€ 899 .00

€ 2,199 .00

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Paint Shop

Recycling

Solvent Recycler

Pneumatic Aerosol Crusher 279770140

For solvents that are neutral or close to neutral pH. Optional accessories also available:

• 4 aerosol capacity (2 or 4 at a time) • Pierces aerosol • Gases absorbed by filtration • Up to 80% compaction • Cans can be recycled as non- hazardous waste! • Safety interlock • Max aerosol size 260mm height • Reduced hazardous waste storage.

• 80 litre collection tank • Transfer loading pump • Spill tray – ask for details.

279770150 for larger aerosols and up to 8 capacity.

Copper Condenser 590010360 Suitable for neutral pH solvents

Stainless Steel Condenser 597779230 Suitable for strong acid or alkaline solvents

€ 5,649 .00 € 6,149 .00

Paper/Cardboard Compactor 597779410 € 1,985 .00 Reduce the cost of removing waste. By compacting and baling light cardboard and paper on site, you can reduce the volume up to 75% • Compaction up to 75% • Bale weighs only 35-45 lbs/20 kilos • Air operated 1900 lb/865 kilo ram • Completelymobile and manageable.

Pneumatic Can Crusher 597990950

• Crushes up to 30 Ltr cans • Air operated • Fully automatic • Compaction up to 80% • Double acting pneumatic cylinder • Door safety Interlock.

€ 1,929 .00

€ 2,349 .00

15 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Paint Shop

DeVilbiss DV1 Basecoat Spray Gun

DeVilbiss DV1 Clearcoat Spray Gun

DESCRIPTION

PART NUMBER

Gun and Cup Kit | Digital HVLP Plus Air Cap and 1.2mmTip HVLP Plus Air Cap and 1.3mmTip Gravity Gun Only | Digital 1.2mmTip Gun and Cup Kit | Classic HVLP Plus Air Cap and 1.2mmTip HVLP Plus Air Cap and 1.3mmTip Gun Only | Classic HVLP Plus Air Cap and 1.2mmTip HVLP Plus Air Cap and 1.3mmTip DV1 S HVLP Kit • Deliver ultimate Smart/Spot repair application performance • Atomizes effortlessly with a selection of finely tuned air cap and fluid nozzle setups. 1.3mmTip

DEV.DV1-C-BAR-12-B+ DEV.DV1-C-BAR-13-B+

DEV.DV1-U-BAR-12-B+ DEV.DV1-U-BAR-13-B+

DESCRIPTION

PART NUMBER

Gun and Cup Kit | Digital 1.2mmTip

DEV.DV1-C-BAR-12-C1+ DEV.DV1-C-BAR-13-C1+ DEV.DV1-C-BAR-12-C2+ DEV.DV1-C-BAR-13-C2+ DEV.DV1-U-BAR-12-C1+ DEV.DV1-U-BAR-12-C2+ DEV.DV1-U-BAR-13-C1+ DEV.DV1-U-BAR-13-C2+ DEV.DV1-C-000-12-C1+ DEV.DV1-C-000-12-C2+ DEV.DV1-C-000-13-C1+

DEV.DV1-C-000-12-B+ DEV.DV1-C-000-13-B+

1.3mmTip

1.2mmTip and C2 Aircap 1.3mmTip and C2 Aircap

DEV.DV1-U-000-12-B+ DEV.DV1-U-000-13-B+

Gravity Gun Only | Digital 1.2mmTip

1.2mmTip 1.3mmTip 1.3mmTip

Gun and Cup Kit | Classic 1.2mmTip

1.2mmTip 1.3mmTip

DESCRIPTION

PART NUMBER DEV.704531 DEV.704532 DEV.704533

Gun Only | Classic 1.2mmTip

0.7, 0.9, DV1-M1, Cupped 1.0, 1.2, DV1-S1, Cupped 1.0, 1.2, DV1-S2, Cupped

DEV.DV1-U-000-12-C1+ DEV.DV1-U-000-12-C2+

1.2mmTip

Finishing Tools

Farecla G-Plus Polisher With UK Plug 220V FAR.GPT003 • High torque makes it ideal for 6" and 8" pads • Lightweight to help reduce muscle fatigue • Very low vibration – Only 1.7 (3 axis, m/s 2 ),

Farecla G Plus Orbit Polisher Dual Action 15mm FAR.GPT203

Mini Cordless Polisher FAR.FG-MINIPOL/ADV

• 15mm throw – Balancing speed of paint correction with machine vibration • Precision engineered counterweight • Minimizes vibration and the associated user fatigue • Lightweight – Only 2.6kg, reducing muscle fatigue • Speed indicator – Lets you polish at the recommended OPM for optimal performance.

• 10.8V • 75mm • With 2 Batteries • Capable of 2800RPM • Lightweight at only0.88kg.

reducing hand-arm vibration • Supplied with a free G-Mop 6" flexible backing plate.

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Take control of your booth’s energy consumption With rising overheads, are you in control of how much energy your spraybooth is using?

When was the last time you reviewed your spraybooth’s energy consumption? Have you taken stock of the processes, equipment and behaviours in your Bodyshop recently, and what they’re actually costing you? Is it time to make some simple changes and take back control? It’s not uncommon to see spray booths switch on first thing in the morning and left on all day – whether or not they’re in use. Changing behaviours like this can deliver as much as 18% increase in efficiency – without costing you a penny. And if you’re prepared to invest a little upfront, you can achieve up to 70% increase in efficiency – making your money back in a matter of months. Read on for energy-saving ideas you can implement today.

Why not automate the painting process?

Do you want to harness all the available technology to monitor and minimize your booth’s energy use? In addition to using modern controls, why not upgrade your air handling and heating plant? In doing so, you can gain as much as 70% efficiency for a fraction of the cost of a new booth. Ultimate efficiency is achieved by dynamic interaction between the plant and the control system. Upgrading the mechanical systems and software controls is the most cost-effective way to achieve performance that rivals the most fuel-efficient new booths on the market today.

Even with the best intentions, it can be hard to ensure consistent behaviour when multiple team members are managing high work volumes. So why not automate the painting process? A modern booth control system can deliver up to 50% efficiency gains. You can tune the control system to make the painting process as efficient as possible. And if your control system is old or rather basic, with our help, you can retrofit a modern one. Our Workshop Solutions team can guide you through the process.

17 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Take control of your booth’s energy consumption A modern high-efficiency booth will come with mechanical and control system features that optimise job times and energy use. It’s important to make full use of these features, and to keep a close eye on your energy use per job.

If your booth is more than five years old, there’ a good chance you can improve its efficiency by upgrading the control system and/or the air movement and heating plant. And you’ll make your money back in a matter of months. It’s not just older booths that can benefit from efficiency upgrades. Many newer entry-level booths lack the full array of energy-efficiency features that higher-end models come with. Relevant upgrades make financial sense here too. Taking full control of your spraybooth’s energy use is easier than it sounds, and we can help you find the best way forward. Call your branch and ask for a consultation with your Workshop Solutions Equipment Manager.

What you can do as a behaviour change

• Turn the booth off when it’s not in use. • Adopt energy efficient paint repair processes (air-dry primers, UV primers etc). • Reduce the overall process time per job to the minimum. • Set the booth temperature correctly to requirement – if the paint scheme only needs 22°C, energy is being wasted if the booth temperature is going to 26°C. • Pre-set bake temperature profiles

and make sure they are used. • Switch to a low-temperature paint scheme.

What you can implement with a control software upgrade • Automatic ‘off’ if the booth is not in use • Automatic reduced air rate for idle periods • Automatic booth shut-off at the end of bake cycle • Control system tuning to make the painting process as efficient as possible.

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Take control of your booth’s energy consumption

What you can install as a full retrofit upgrade Auxiliary air movement system to allow lower airflows for flash off and bake, and lower temperatures through all cycles. Variable speed drives on the fan motors to automatically adjust the amount of air the booth produces to suit the mode/cycle. Automatic recirculation system for idle/load/clean and flash off cycles, so you’re not heating all the air from an external point (which could be below freezing in winter). Control system software to track the amount of gas and electricity being used by individual job number.

About us Our expert Workshop Solutions Specialists will provide tailored recommendations for your Bodyshop brought to life with CAD drawings to help you visualise your options – with no obligation to go ahead. As well as advising on workflow improvements and technology upgrades, we also supply an extensive range of brand new spraybooths, from entry-level and Intelligent Repair, for both Automotive and Commercial.

The range of booth’s we offer: • Internal/external booths

• Automotive • Commercial • Movable booths • Multibooths • Intelligent Repair

• Spraybooth upgrades • Spraybooth servicing

(including smoke clearance test, LEV test and certification, breathing air quality test, calibration).

Would you like to know your current energy cost per job? Scan our QR code, answer a few simple questions and one of our experts will get back to you.

* Including smoke clearance test, LEV test and certification, breathing air quality test, calibration.

19 Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Take control of your booth’s energy consumption

Q&A

2.H ow do you know savings figures are accurate?

3.W hat is involved in upgrading to higher efficiency control system and mechanical plant? Once a plan has been agreed and scheduled, the aim is to keep offline time to a minimum. A complete controls and plant overhaul can be done in as little as three days, and customers have told us the disruption is far less than they expected.

1. H ow do I calculate my spraybooth’s running costs?

Our Workshop Solutions team, working with our Supplier Partners can do that for you, all we need are copies of your gas and electricity bills, the approximate number of vehicles you process per week, and to carry out a quick survey on your existing equipment. We can guide you through current and future costs, and potential savings.

Live tests with independent gas and electric meters have been fitted to spraybooths in bodyshops across the UK to compare upgraded system costs to standard costs. Figures have been verified by independent energy experts.

Did you know?

The original government energy support scheme for commercial users ended 31st March 2023. It’s still unclear what support will be available next winter. Energy prices for the rest of this year and beyond are unknown but likely to be volatile.

Spraybooths and compressed air systems are the biggest consumers of energy in the bodyshop (for energy-saving compressors see page 25-27) . Any spraybooth can have the control system and/or mechanical system retro-fitted to deliver higher efficiency performance. Payback can be in months not years.

Call your local branch | Branches nationwide

omnipart.eurocarparts.com

Paint Shop UV Paint Curing