Toolsaver Issue 2025

Promotion valid 1st Oct – 31st Dec 2025 T oo lSaver OFFERS AVAILABLE THROUGH YOUR LOCAL SUPPLIER OF THE TOOL CONNECTION LTD BRANDED PRODUCTS

ISSUE 5

Edition! NEW 68 page

£129. 95

2:1 SHRINK RATIO

Braided Fabric Heat Shrink Sleeving - Master Kit 34327 The kit includes a butane gas-powered hot air gun and a selection of fabric heat-shrink sleeves ideal for use on wiring looms,

coolant pipes, fuel lines, and battery cabling. The flexible, abrasion-resistant material provides protection in both hot and cold environments (-40˚C to +125˚C), perfect for engine bays and vehicle undercarriages. It reduces vibration noise and minimises wear on wiring and pipes caused by friction.

Electric Vehicle Coolant Testers Enhances the appearance of engine bays - ideal for the professional and enthusiast.

Í Sleeves, Sizes: 12mm x 2m, 20mm x 2m, 40mm x 2m, 60mm x 2m & 80mm x 2m.

£59. 95

£59. 95

Antifreeze PH Meter 9193

EV cooling systems there is a need to measure the acidity of the coolant. Over time coolants decay and their acidity increases which increases the internal corrosion within the cooling system. The Laser 9193 PH tester has been introduced to allow the user to quickly check the acidity of the coolant.

Coolant Conductivity & TDS Tester 9204

Í Application: Suitable for measuring the acidity of antifreeze, coolants and water.

pm

Modern EV cooling systems use a special antifreeze that is not diluted and is manufactured to have a very low conductivity. Unfortunately, drivers and some less aware garages will top up with water which can result in conductive coolant coming into contact with live electrical systems with disastrous results. This conductivity tester has been introduced to allow the user to quickly check the conductivity of the coolant.

16 th October 2

r live

Join us fo demonstr

ations:

nstrate

am demo

r expert te

om Laser !

Watch ou

st tools fr

CIRCLE-ARROW-DOWN-RIGHT toolconnection.co.uk

the newe

www.lasertools.co.uk/LaserLive

A wide range of specialist automotive tools and consumables, Tool Connection is home to the worldwide recognised brands known for their quality and value for money, all supported by our sales, technical and service teams. Our service is second to none and our guarantee means what it says! bringing you the newest tools and best offers from across our vast range of automotive tools and accessories. PLUS-CIRCLE View the complete Laser Tools product range 24/7. PLUS-CIRCLE Access to over 10,000 products, with information, images, 360˚ views & videos. PLUS-CIRCLE Up-to-date product data. PLUS-CIRCLE Search OEM Data, Timing Tools and GEN2 Wheel Bearings with our TOOL POINT ® function. PLUS-CIRCLE Downloadable instructions, application & product information. Welcome to the latest even bigger issue of ToolSaver! Our quarterly promotional leaflet

Our leading automotive brand, offering premium hand tools and a growing range of specialist tools designed to handle challenging jobs with ease. Developed with input from working technicians, the range includes engine timing tools and insulated tools for electric and hybrid vehicles. SQUARE-ARROW-DOWN-RIGHT lasertools.co.uk A complete and inclusive range of workshop consumables designed to meet the needs of today’s tradespeople and technicians. Our ever-growing range brings together exceptional variety and quality, offering solutions not seen before in the UK market. Whether you're stocking a professional workshop or tackling day-to-day tasks, we’ve got the consumables you need - all in one place. SQUARE-ARROW-DOWN-RIGHT connect-consumables.co.uk Offering a large range of tools and equipment developed to make the professional body repairer's job faster and more efficient, at the heart of the range is the renowned cost-saving Miracle System, which also promotes the sustainable ethos of ‘ repair over replace ’, reducing waste and helping preserve valuable vehicle components. We're also leading the way with innovative tools for working on hybrid and electric vehicles and support the industry’s transition to more sustainable repair practices. SQUARE-ARROW-DOWN-RIGHT power-tec.co.uk

Visit Online:

CONTENTS Tech Talk HEAD-SIDE-VIRUS

p.3

NEWLINES

p.4-5 p.6-7

Steering & Suspension GEN2 Wheel Bearings

p.8 p.9

Hub/CV Joint Wheels & Tyres

p.10-11 p.12-15 p.16-19 p.20-21 p.22-23 p.26-27 p.28-29 p.30-31 p.32-35 p.24 p.25

Bodyshop Hybrid / EV Electrical

lasertools.co.uk

Airtools Clutch

Follow us:

Timing Tools

Commercial Vehicle Lifting Equipment

Don’t forget to follow us on Facebook, Instagram, LinkedIn, Threads and TikTok, to keep up-to-date with our latest product releases and news. Scan the QR to join us today!

Lighting

CLEARANCE STOCK

Braking

p.36 p.37 p.40 p.41 p.42 p.43 p.44 p.45 p.50 p.51 p.54 p.55 p.56 p.57 p.58 p.59 p.60 p.61 p.62 p.63 p.66 p.68

Cooling Systems

Diesel Petrol Ignition Exhaust

p.38-39

Scan our QR codes throughout to watch our videos

Our in-house videography team bring our latest tools to life! Watch product demos and tutorials that highlight the features and applications of our newest products. Make sure to like, subscribe, and click the bell button to get notified when new videos are uploaded.

Watch us:

Engine Block

Oil

Hose Clips

Visit our multiple channels:

Don’t miss out on LASER LIVE - featuring live demonstrations, expert insights and Q&As.

Connect Consumables

p.46-49

ARROW-SQUARE-RIGHT www.youtube.com/@TheToolconnection ARROW-SQUARE-RIGHT www.youtube.com/@Laser-Tools ARROW-SQUARE-RIGHT www.youtube.com/@Power_TEC

Pliers

Bits & Screwdrivers

Powertools

p.52-53

Torque Wrenches Torque Accessories

Technical & Aftersales Support

Spanner Sets

Our dedicated aftersales team are always happy to assist with enquiries, ensuring a smooth and reliable customer experience. Integrated within our aftersales department is our renowned technical team, delivering expert support and product knowledge.

Spanner Accessories Impact Socket Sets Impact Accessories Ratchets & Accessories Socket Accessories

They provide expert advice, hands-on product support, and in-depth knowledge across a wide range of automotive tools and technologies. Whether you need guidance on engine timing kits or fully insulated tools for EV and hybrid systems, they’re here to help. Our technical team is officially recognised as a Certified Data Supplier for TecDoc, a mark of excellence that reflects the accuracy, depth, and professionalism of the data and support we provide. Our aftersales and technical team deliver confidence and expertise you can count on - before and after your purchase.

Socket Sets

Socket Rails/ Accessories

Storage Tool Kits

p.64-65

Oil Draining

TECH TALK HEAD-SIDE-VIRUS

PAUL SHEPHERD TECHNICAL SALES SUPPORT Bringing more than 26 years of hands on workshop experience as a fully qualified vehicle technician, Shep joined us at The Tool Connection in 2011. He started as a Laser Tech Van Operative, a role he held for 11 years before moving into his current position as Tech Centre Demonstrator in 2022.

Over the years, he has come to appreciate the kind of tools that really get you out of trouble. His experience has given him a sharp eye for practical, reliable tools that not only do the job but also make a real difference to everyday efficiency. Shep has picked three products from the Laser Tools range that he wouldn't be without!

£269. 95

5931 Internal Coil Spring Compressor

£269. 95

A coil spring compressor which is designed for independent springs, where access is available through the hole in the wish bone. A very popular tool widely used on Fords and Audi's where seized suspension bolts are most common. The coil spring can be safely compressed in position and replaced without the need to remove any bolts, not only cutting down on repair times but also in some cases the need to adjust the alignment.

£219. 95

37199 Fuel Line Repair Kit

Over time, I’ve found that the plastic fixings on fuel lines become brittle. You can be doing something as routine as changing a fuel filter, or just working away, when you suddenly hear that dreaded SNAP - a broken or fractured fuel line fixing. With the 37199, I can confidently carry out an O/E-style repair, knowing it’s going to last for years to come. This expertly designed kit allows you to easily install the ribbed connectors securely into the plastic hard fuel lines. This kind of repair can be carried out on any vehicle so there is no need to contact a main dealer for a new pipe costing hundreds of pounds. The other beauty of this kit and any kit from Connect Workshop Consumables is that every part can be easily replenished when used.

Run off the 12V car battery

8831 Diagnostic Smoke Leak Detector Kit

This is one of those tools that I wish was around many years ago when I was on the tools. Trying to find boost leaks or vacuum leaks while the engine was running and idling unevenly was always a headache, not forgetting breather pipe leaks causing a smell. The smoke leak detector kit takes all of the guesswork away, complete with a range of adapters and an inflatable bung, and the ability to generate up to 18psi makes it a great companion for the workshop when carrying out diagnostic work. And because it runs off a 12v supply, it means it’s also a very portable piece of kit!

3 ToolSaver

Hurry Exclusive, limited time offers on new & best selling tools & equipment!

Xxxx New & innovative tools from New Lines

Increased weight produces increase in effective torque

Weighted Socket Set 1/2"D 6pc 9172 Set featuring six 1/2"D sockets with increased weight designed into these sockets reduces impact losses, increasing the effective torque delivered by the impact gun. Í Designed specifically for stubborn and high torque crankshaft pulley fixings.

£119. 95

Í Sizes: 17, 18, 19, 21, 22 & 24mm x 1/2 " D. Single Hex (6pt) profile. Length: 97mm.

£59. 95

£59. 95

Double Ended Trim Clip Set - 2pc 9182

£24. 95

A set of 2 doubled ended chrome finished trim tools, suitable for gently easing apart push-fit plastic components and removing both interior/exterior trim clips. Í U notched ends are curved, angled & tapered to ensure ease of use. Í Overall length: 173mm; width: 15mm; jaw width: 5 & 7mm.

Coolant Conductivity & TDS Tester 9204 Modern EV cooling systems use a special antifreeze that is not diluted and is manufactured to have a very low conductivity. This conductivity tester has been introduced to allow the user to quickly check the conductivity of the coolant.

Antifreeze PH Meter 9193

With EV cooling systems its important to measure the acidity of the coolant. Over time coolants decay and their acidity increases which increases the internal corrosion within the cooling system. The Laser 9193 PH tester has been introduced to allow the user to quickly check the acidity of the coolant.

Í Accuracy: Electrical Conductivity: ±2%F.S.TDS: ±2%F.S.Temp: ±0.5˚C.

Í Application: Suitable for measuring the acidity of antifreeze, coolants and water.

£24. 95

Compact Diagnostic Smoke Leak Detector Kit 9275 A compact and simple to use “plug and play” smoke machine used to test sealed systems for leaks. It produces smoke and allows it to be delivered, in a controlled manner, to pipe work such as inlet manifold pipe work, plenum tubes, turbo pipes, intercoolers & pipes, exhaust systems, EVAP systems, engine breather pipes and vehicle door seals* etc. to help in the identification of otherwise hard to find leaks. Í Designed to be powered by 12V vehicle battery. 65W. Max: 5.5 amps draw. Í Supplied with smoke pipe, cone adaptor, pipe adaptor, hanging hook & oil dispensing bottle.

Low Profile Square Drive Adaptor Set - 5pc 9232

A selection of low-profile square drive convertors, comprising female to male square drive adaptors. Í Step up adaptors: 1/4 " D (F) to 3/8 " D (M), 3/8 " D (F) to 1/2 " D (M), 1/2 " D (F) to 3/4 " D (M). Í Step down adaptors: 3/8 " D (F) to 1/4 " D (M), 1/2 " D (F) to 3/8 " D (M).

£139. 95

£29. 95

£49. 95

Adjustable Pulley Puller - Ribbed Belt Pulleys 9231

32mm Damaged Wheel Nut Socket 3/4 " D - HGV 9256

Designed to enable the removal of auxiliary drive belt pulleys that use ribbed belts. With left and right-hand threaded clamping mechanism it ensures the toothed clamps close equally onto the pulley ensuring the force screw stays central mounted on the pulley shaft. Í Applications include: water pump pulley, alternator pulley, air conditioning pulleys

A special profile that grips the socket designed specifically for removing damaged nuts and bolts. This twin drive socket also features an 36mm outer hex drive, allowing it to also be used with any 36mm impact socket. Í Applications include: HGV truck & trailer wheel nuts.

& crankshaft pulleys, etc. commonly used across many makes & models.

4 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY

New Lines New & innovative tools from

PROMOTIONS VALID FROM 1st Oct – 31st Dec 2025

£19. 95

Unique serrated jaws are good for gripping rounded off fixings

600mm Length

£34. 95

Double Headed Adjustable Wrench - 8 to 32mm 9257 An adjustable wrench with spring-loaded jaw and serrated teeth. Its simple pull back action allows a quick and firm grip on fixings from 8mm to 32mm in diameter. Particularly good on damaged or rounded-off fasteners, pipe fitting, flare nuts and nuts on long threaded bars (cable adjuster for example). Also ideal for plumbing. A must have in any toolbox. Í Overall length: 265mm. Range: 8 - 32mm across 2 heads. Í For use on all types of bolts, including Single Hex (6pt), Bi-Hex (12pt), Star*/TORX, Spline, Square, metric & imperial equivalents, etc.

Power Bar 1/2 " D - 600mm 9254

A 600mm 1/2 " D breaker bar for extra leverage when working on tight fixings such as wheel nuts and cylinder head bolts etc. Í Length: 600mm (24 " ) x 1/2 " D. Í Exceeds DIN 3122 (512Nm), the breaking point of this tool is 637Nm.

Extends 415mm to 750mm

£32. 95

Air Blow Gun - Extendable with Side Holes 9229 An extendable side hole air blow gun with a plated steel extension tube that can extend from 415 to 750mm. Ideal for cleaning out air filters, intercoolers and radiators on HGV and larger agricultural machinery or anywhere access

requires a long blow tube. Í Working pressure: 90psi; Max pressure: 140psi.

Difficult Access Sensor Wrench Set - 5pc 9230 Designed specifically to work with the Laser 4590 Hand Impact Wrench. The set has been introduced to the Laser range as a result of customer requests for more sizes to work with 4590 for the removal of difficult to reach exhaust sensors. Í Super slim fit for access; 14mm, 17mm, 19mm, 22mm & 24mm across the flats, 6-point crows foot style wrench with 1/2”D. Í Can be used with 1/2 " D socketry & torque wrench applications.

£39. 95

Extra Long Series Colour Coded Hex & Star Key Set - 27pc 9244

Extra-long series metric & imperial hex and Star* keys, colour coded to help with size identification. Hex keys all have ball ends to help with access issues. Each set are supplied with handy plastic clips to keep them tidy. Í Sizes include: Hex: 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm; Imperial Hex: 1/16 " , 5/64 " , 3/32 " , 1/8 " , 5/32 " , 3/16 " , 1/4 " , 5/16 " & 3/8 " ; Star sizes: T10, T15, T20, T25, T27, T30, T40, T45 & T50. Í Supplied in EVA foam tool box tray.

CODE DESCRIPTION

PRICE

£19.95 £19.95 £79.95

9190 Individual 19mm Wrench 9191 Individual 24mm Wrench

Designed to help reach difficult access exhaust sensors

9230 5pc Set. Sizes: 14, 17, 19, 22 & 24mm

5 ToolSaver

Hurry Exclusive, limited time offers on new & best selling tools & equipment!

Suspension Repair

£19. 95

Ball Joint Wrench Set - for Mercedes-Benz 8459

Offset ball joint wrenches designed for the removal and installation of both the upper and lower ball joint nuts on Mercedes models fitted with double wishbone suspension set ups. From 2015 onwards. Í Applications: C class (2015 to 2021), E class (2015 to 2021), GL (2016 to 2021) and AMG GT (2019 to 2021).

Ideal for loosening stuck wheels, no need to resort to wooden blocks & hammers.

£339. 95

£12. 95

Suspension Play Tester 9174

Ball Joint Socket 1/2"D - for Renault 8098 Allows removal of the screw in type lower joint from the bottom arm. Application: Renault Twingo II Sport 133 (2007 - 2014).

Designed to easily and quickly attach to a vehicle wheel, allowing the user to simply move the wheel up and down or left to right to feel and look for play in the suspension & steering system. Ideal for detecting movement in worn joints, wheel bearings and top strut mounts. Designed for use with the vehicle on the floor or ramp. Í Fits tyre diameters from 550 - 800mm. Í Mounts horizontally to check steering joints & tie rods. Í Can be used on front & rear wheels.

Air Suspension Strut Leak Tester Kit 8976

Designed for testing air suspension struts for leaks. Allows the strut or any pneumatic system to be pressurised from workshop air and then isolated using the built-in tap. Any pressure drop can then be monitored over time. Í BMW, Mercedes-Benz, Audi, Porsche Cayenne, Land Rover vehicles fitted with air suspension struts. Í Adaptors included in kit: 1/8 " NPT, M8 x 1.0mm, M9 x 1.0mm, M10 x 1.0mm. Í Can be used on-vehicle depending on access.

£69. 95

£17. 95

FROM

£17. 95

Suspension Split Hub Knuckle Spreader Bit Set - Oval Shape 3pc 9263 A set of 3 compact hub clamp spreader sockets designed to allow the suspension split hub to be held open to make the removal and fitting of the suspension strut easier. Suitable for use on various BMW, Citroen, Ford, Peugeot and VW Group models. Specially shaped oval bits give a smoother more progressive action. Í Simple to use. Slide the oval shaped

Track Rod Adjusting Wrench Track rod adjusting wrench suitable for adjusting track rods, as well as for general use. Í Pipe wrench type design with quick fit spring loaded jaw. Í Serrated jaws help prevent slippage & damage to track rods. CODE SIZE JAW RANGE PRICE 8828 690mm 10mm - 42mm £21.95 8038 457mm 10mm - 35mm £17.95

Spring loaded drop-forged jaw for strength

bit into the hub slot & turn through 90 degrees to open the joint. For use with a 1/2" drive wrench.

6 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY

PROMOTIONS VALID FROM 1st Oct – 31st Dec 2025

Bush Removal/Fitting

Rear Hub Bush Tool Kit - for BMW 5, X5 & 7 Series 9209

£169. 95

Designed to remove and fit the lower rear suspension hub rose joint (ball joint) on the BMW 5, X5, 6 & 7 Series, without having to remove suspension arms, subframes, etc from the vehicle. Designed to be used in-situ. Í Applications include:

Rear Axle Carrier (Sub-frame) Bush Tool – for BMW X5 & Range Rover 8739 Designed to remove and fit the 4 rear sub-frame bushes found on the BMW X5 (E53 chassis). Can also be used on the L322 Range Rovers that utilise the same BMW sub-frame assemblies. Í Applications include: BMW X5 (E53 chassis 1999 - 2006) & Range Rover L322 (2001 - 2011). Í Used without dropping the sub-frame from the vehicle. Í BMW OEM bush number 33 31 6 770 454.

Transmission Rubber Mounting Bush Installer/Remover - for BMW 9084 Designed to enable the removal and fitting of the bush with the BMW 5 Series (1996 - 2017), X5 (1999 - 2015), 6 Series (2003 - 2011) & 7 series (1994 - 2015). Í Chassis codes covered: E38, E39, E53, E60, E61, E63, E64, E65, E66, E67, E70, F01, F02, F04, F07, F10, F11 & F18.

£89. 95

£199. 95

transmission still in the vehicle and the minimum of disassembly. Í BMW 4-wheel drive (xDrive) transmission mounting kit. Í Applications include: BMW 3 series 2005 - 2014. 5 Series 2003 - 2017. 7 Series 2008 - 2015. X1 2009 - 2015. Í Gearbox applications include: ATC300, ATC350, ATC35L & ATC450 (all 4x4).

Differential Bush Removal & Installation Tool Kit - for BMW 8406

Designed to allow the user to quickly and easily remove both the old bushes and fit new front and rear bushes on the rear differential, while the subframe remains in the car. Í Applications include: BMW 1 Series (2004 - 2014), 3 Series (2005 - 2014) and Z4 (2003 - 2009). Í BMW chassis references: E81, E82, E83, E84, E85, E86, E87, E88, E90, E91, E92 and E93.

£229. 95

£349. 95

£99. 95

Bush Removal & Fitting Tool - for BMW Rear Differential Mounting (front bushes) 8860 The late model F chassis

Rear Trailing Arm Bush Tool - for Ford Focus 7960

BMW models have 3 mountings on the rear differential, 2 front and 1 rear. The 8860 is designed to allow for

Designed to be used on vehicle, the 7960 rear trailing arm bush tool allows the user to removes and fit the front bush on the rear arm of the Ford Focus from 2012.

Í Applications include: Ford C-Max, Focus and Kuga II (from 2012); fits OE bush number 1 692 849. Volvo V40 (from 2015) OE bush 31360092 Í Includes bush fitting and extraction cups for both bush sizes from 2012.

the safe removal and fitting of the front mounting bushes on the rear differential. See website for full applications list: www.lasertools.co.uk/product/8860 Bush Removal & Fitting Tool - for BMW Rear Differential Mounting (rear bushes) 8857 The rear differential on the late model F chassis BMW's have 3 mounting bushes, 2 front and 1 rear. The 8857 is designed to allow for the safe removal and fitting of the rear differential mounting bush. See website for full applications list: www.lasertools.co.uk/product/8857

Front Suspension Bush Tool - for VW T5, T6 7796 Í Applications includes: VW T5, T6 vans (from 2003),

£149. 95

including Transporter, Caravelle & Multivan. Í Specifically for OEM

bush numbers 7H0 407 183 & 7H0 407 182 and aftermarket direct equivalents. Í Patented design ensures both bushes are correctly aligned to each other.

£99. 95

7 ToolSaver

Hurry Exclusive, limited time offers on new & best selling tools & equipment!

GEN2 Wheel Bearing Kits Individual kits for various sized bearing removal & refitting

£999. 95

GEN2 Master Kit 3704 For the removal and fitting of new bearings.

Gen2 wheel bearing kit complete with additional insertion and extraction clamshells, plus force plate and pin sets. Master kit contains: Í Laser 5587 - GEN2 Wheel Bearing Kit 62, 66, 72, 85mm - for VAG Í Laser 5944 - GEN2 Extraction Clamshell 78mm Í Laser 5947 - GEN2 Insertion Clamshell 82mm Í Laser 5946 - GEN2 Extraction Clamshell 82mm Í Laser 5945 - GEN2 Insertion Clamshell 78mm Í Laser 5949 - GEN2 Force Plate & Pins - 75, 78, 82mm

£249. 95

£249. 95

£219. 95

GEN2 Wheel Bearing Kit 78mm - for Ford 5568 Applications: Ford Focus II, C-Max; Mazda 3 and Volvo C30, C70, S40 and V50.

GEN2 Wheel Bearing Kit 72mm - for VAG 5473 Applications (vehicles equipped with PAS): Audi A2; Seat Ibiza; Skoda Fabia and Roomster; Volkswagen Fox and Polo.

GEN2 Wheel Bearing Kit 62, 66mm - for VAG 5576 Applications : Audi A2; Seat Arosa, Cordoba and Ibiza and Volkswagen Lupo. FIND THE RIGHT GEN2 WHEEL BEARING KIT

£599. 95

£279. 95

GEN2 TOOL POINT

GEN2 Wheel Bearing Kit 62, 66, 72, 85mm - for VAG 5587 Applications: Audi A2; Seat Cordoba & Ibiza; Skoda Fabia & Roomster; Volkswagen Fox, Lupo, Multivan, Polo, Touareg & Transporter.

GEN2 Wheel Bearing Kit - for Smart Forfour/ Mitsubishi Colt 6 5823 Application: Smart Forfour and Mitsubishi Colt MK6 front GEN 2 Wheel bearings from 2004.

www.lasertools.co.uk/gen2

VISIT OUR WEBSITE TO USE OUR SEARCH ENGINE!

8 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY

PROMOTIONS VALID FROM 1st Oct – 31st Dec 2025

Effortlessly stretch CV boot over drive shaft!

CV Bootgun 4806

The quickest and most effective way to install flexible CV boots with diameters up to 115mm. Designed and made in the UK,

Hub/CV Joint Tools

the bootgun uses a compressed air supply to stretch the CV boot onto the drive shaft with the

minimum of effort. Í For use with an air

compressor. Works at 58 - 101psi (4 - 7 bar). Standard 1/4" BSP connection.

£59. 95

£129. 95

CV Joint Puller 4719 For removing CV joints on front wheel drive cars without removing the drive shaft. Í Can accept CV joints up to 102mm in diameter. Í Adjustable clamping positions for drive shaft.

Assorted Oetiker Dual Hook & Universal CV Boot Clamps 30268 A comprehensive set of industry standard metal band clamps suitable for use on constant velocity joint (CVJ) rubber boots. Kit contains: Í Oetiker dual hook adjustable ear clamps. Sizes: 29-30.7mm (Part No. 32293), 32.1-37.3mm (32294), 67.3-93.1mm (32295).

TOP UP PACKS

AVAILABLE

£19. 95

CV Boot Tool 2971

Designed to make quick, easy work of installing a new CV boot without disassembly. Simple to use, put the boot on the greased cone inside out, slide into place and secure the boot with a clip. Í Cone taper: 34 - 101mm; cone length: 320mm; total tool length: 405mm.

Í Oetiker universal CV boot clamps. Sizes: 25-40mm (Part No. 32297), 50-110mm. (32298). Í Box size: 470 x 373 x 80mm.

£89. 95

CV Boot Pliers

£59. 95

CV Boot Clamp Pliers 3/8"D 7316 For fitting stainless steel bands on drive shafts where a torque setting is specified. Í Two way jaws offer a choice of clamping positions at 90° to each other, ideal for use in restricted areas. Í Applications include: Ford, VAG, Vauxhall, Opel. Equivalent to VAG 1682A.

CV Boot Hose Clamp Cutter 7092 Long-reach, angled tool handles for more leverage & cutting power. Í Max jaw opening: 10mm; jaw size: 0.5 x 0.7mm; Total tool length: 215mm.

£19. 95

£19. 95

£13. 95

£29. 95

CV Boot Clip Pliers - for VAG 6155 A specialist tool for securing the clips on outer CV boots across a range of VW Group vehicles. Í Applications include: Audi, Mercedes-Benz, Skoda, Toyota, Volkswagen. Í For 108mm drive shaft diameters.

CV Boot Clamp Pliers – for VW Group 8703 A pair of CV boot clamp pliers designed for tightening the earless type CV boot clamps used on various Volkswagen group vehicles. Í Applications include: Audi, Skoda, Volkswagen. Also various Mercedes-Benz & Toyota vehicles.

CV Boot Clamp Pliers 4136

Heavy duty pliers for use on ear type metal CV boot clips. The jaws crimping action prevents damage and correctly tensions the clip. Í Handles have a 1/2" square hole for use with a power bar when extra tension is required

9 ToolSaver

Hurry Exclusive, limited time offers on new & best selling tools & equipment!

WHEEL & TYRE

Stud & Locking Wheel Nut

£59. 95

Wheel Stud Installer Kit - 10pc 9185 Vehicle wheel studs wear over time, every time the wheels come off the car the studs are subjected to the potential for damage due to dirt or over-torquing. The Laser 9185 is a 10-piece kit made up of 4-wheel stud fitting tools including 2 friction reduction washers and 4 thread chasers. Í Sizes supplied: M14 x

Wheel Stud Extraction & Fitting Tool Set - Car & Van 9119 A simple and fast-to-use set of threaded sockets, extraction punch and fitting bearing. Í Applications include: BMW, Chrysler, Ford (including Transit), Hyundai, Kia, Mazda, Mercedes Benz (including sprinter), Mitsubishi, PSA & VW Group models. Í Stud sizes covered: M12 x 1.25, M12 x 1.5, M14 x 1.5.

£69. 95

2.0mm, M14 x 1.5mm, M12 x 1.5mm, M12 x 1.25mm.

£43. 95

Universal Stud & Hub Cleaning Kit 7pc 8908

A universal stud and hub cleaning tool kit suitable for use on wheel studs up to 28mm in diameter, to remove corrosion and dirt in preparation of refitting the wheels to the vehicle. Í Includes 6x abrasive discs, sizes: 50 x 12, 50 x 13, 50 x 14, 60 x 16, 60 x 22 & 60 x 28mm. Í Use with a 1/2"D impact gun or power tools.

Twin Drive Impact Wheel Sockets - 4pc 9173

£49. 95

3/4" drive quick fit adaptor designed to lock on to the supplied 1/2" drive impact sockets. Designed for use on more powerful 3/4" impact guns, ideal for light commercial vehicles. Í Protective outer sleeves & internal covers to prevent damage to plated wheel nuts. Í Sizes: 17, 19, 21mm single Hex (6pt).

3/4"D adaptor included

£159. 95

Í Includes: 1x 27mm single Hex (6pt) x 3/4"D x 52mm long adaptor with quick-lock facility & rotating sleeve.

Locking Wheel Nut Removal Kit 8842

8 internally threaded, tapered 1/2"D sockets supplied with wheel nut removal discs and a force screw for removing locking wheel nuts from the socket.

Í The additional disc inserts allow the locking wheel nut to be pushed out of the socket after removal from the wheel without causing further damage to the locking wheel nut or socket.

Í Air hammer adaptor allows use of the Laser air hammer (Part No. 6031) if required. Driven using a power bar such as Laser Part No. 1343.

REGISTERED D E S I G N UK

10 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY

WHEEL & TYRE Tyre Repair

PROMOTIONS VALID FROM 1st Oct – 31st Dec 2025

£6. 95

Lever out screw

Fast Repair Tyre Plug 9203 Possibly the fastest tyre repair device yet! The Laser fast repair plug is designed to screw in to the hole in the tyre and then break off flush. Ideal for a temporary repair to get the vehicle moving to the tyre fitting centre. Í Lever manufactured from steel with a powder coated finish. Í The tyre plug handles also feature a built-in tread depth gauge.

Screw in plug and snap off handle

£15. 95

Emergency Tyre Repair Kit - 18pc 9146

A comprehensive rope style emergency tyre repair kit. Includes spare valves, caps and a tyre pressure gauge. Designed to allow temporary "side of the road" repair. Í Kit contains: Rasp & insert tool, both equipped with strong heavy-duty handles. Í Combined tyre valve removal/fitting tool. Pencil style tyre pressure gauge. Í Supplied with 4x tyre valves & caps.

Emergency Tyre Repair Kit with T-Handle & Drill Driver 9147 A comprehensive rope style emergency tyre repair kit that includes both hand and drill driver fitting adaptors. Kit includes spare valves, caps and a tyre pressure gauge. Ideal on vehicle kit. Not recommended as a permanent repair for road vehicles. Í Kit contains: Heavy-duty T-handled rasp & insert tool, drill driver rasp & insert tool. Í Combined tyre valve removal/

fitting tool. Pencil style tyre pressure gauge. Rubber glue solution. 4x tyre valves & caps.

£14. 95 £15. 95

Compressed Air Tyre Bead Seater - 6L 8771 6L air inflator tank, blasts air into the gap between tyre & rim forcing the bead to seat against the rim. For best results use in conjunction with a tyre inflator via the tyre valve. Í Working pressure: 60 - 116psi (4 – 8 bar). Í Maximum pressure: 145psi (10 bar). Í Features: Automatic safety valve, trigger for air release, easy to read pressure gauge & supplied with a 1/4" BSP male standard airline adaptor.

Tyre Valve Tool Set 3pc 5540 Used to remove and replace leaking rubber body tyre valves without removing the tyre. Í Kit contains a valve hook tool, screw tool, and tapered tube. Used with Laser Part Nos. 4220 or 5436 valve core tool. Í Not suitable for tyres with TPMS.

£169. 95

Dial Type Inflator Gauge 5448 A robust tyre pressure gauge with large easy to read 3" dial in psi and bar.

£29. 95

£24. 95

Tyre Pressure & Tread Gauge with Flexi Hose 6273

Reads up to 170psi (12 bar) in increments of 2psi (0.1 bar). Psi/bar (1bar = 100kPa).

Garage Tyre Inflator 5444 Garage tyre inflator for use with pre-set forecourt air supply units, up to 150psi max pressure. Í Twin head with bleed valve. Í Features air release valve and 300mm hose.

A handy 2-in-1 tyre pressure and tread gauge with a protective rubber body and long flexible reinforced hose. Suitable for car and commercial vehicles. Í 50mm diameter dual faced gauge. Í Measuring range: 0 - 130psi (0 - 800kPa), 1 bar = 100kPa.

£49. 95

11 ToolSaver

Hurry Exclusive, limited time offers on new & best selling tools & equipment!

Power-TEC - For those finishing touches

91455

Overspray and Fallout Clay Dark and Metallic 91455

Tungsten Denibbing Tool 92665

Light and Straight 91454

For the removal of overspray and other contaminates such as industrial fallout, jet fuel residue, tar and other general airborne pollution from paintwork in preparation for polishing or waxing.

CODE PRICE 91455 £24.95 91454 £24.95

The Power-TEC Denibbing Tool is a fast and effective way to remove paint and clear coat imperfections, without the need for respraying.

91454

£42. 95

Overspray & Fine Detailing Clay Sheet 92747

£24. 95

The Power-TEC 92747 is a new way to detail and clean paint work prior to final polishing. Simple and faster to use than a clay bar. Í Sheet size: 120 x 80 x 2mm thick.

Shim-Masks 3pc 92439 Used by professional painters and varnishers, SMART and spot repairers, and vehicle refinishers.

Run Razor 91433

This unique tool is used to eliminate runs and sags in fresh paintwork. Normal methods will result in the repair area becoming enlarged causing extra re-work. Í Simply dial the blade until it touches the run & gently pass over the surface.

Protects surrounding paint while runs or imperfections are removed with either a razor blade or sanding block. Í Chemical etching of shapes

£6. 95

£19. 95

means no burring of edges giving a perfectly flat finish.

Stripe Off Discs & Eraser Pads Ideal for the quick removal of pinstriping, decals, stickers, adhesive tape, and residue from car bodywork without damaging the surface. Also suitable to use on glass, metal and wood.

Nib File – Coarse 91449 Í Removes sags & runs on primer or top coat. Í Use in one direction and use on dry paint only. Nib File – Fine 91450 This ingenious tool fixes paint imperfections without the need for re-spraying. Í Easily removes dirt & paint runs from finished paint surfaces. Í Fine pattern removes tiny imperfections. Í Precision ground file gives uniform results.

Stripe Off Disc 2pc 92623 Í Size: 88mm diameter x 15mm deep. Í Shank: 5/16 " x 24T shank; includes adaptor for drill use. Í Max 4000 rpm. Stripe Off Eraser Pad Set with Drill Adaptor – Cone Shaped 9276 Í Sizes: 70 x 60 x 25mm long. 50 x 35 x 45mm long. Í Maximum speed: 4000rpm.

Stripe Off Disc – 5/16" x 24 Thread Shank 92448 Í Rubber erasure wheel, 90 x 15mm. Í With 5/16” x 24tpi thread shank. Í Max 4000 rpm. Fluted Stripe Off Disc 92554 Í Special heat dissipating pattern, helps to prevent overheating & smearing. Í Size: 90mm x 20mm. Í Supplied with an adaptor for drill use. Max 4000rpm. Fluted Stripe Off Disc with Adaptor 92429 Í Fluted design helps to prevent overheating & smearing. Í Size: 100mm x 25mm. Í Max 4000rpm.

£22. 95

£15. 95

£6. 95

£6. 95

£11. 95

£9. 95

Razor Scrapers 5pc 92586 A pack of 5 razor scrapers, for removing

Stripe Off Disc with Shank 91488 Í With 6mm shank. 90mm x 15mm Í Max 4000 rpm.

dried on paint and adhesives. Part of the bodyshop range

of consumables. Í Plastic Body. Í Non retractable.

£4. 95

£5. 95

£2. 95

12 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY

PROMOTIONS VALID FROM 1st Oct – 31st Dec 2025

Trim & Panel Removal Master Kit 11pc 92263 A comprehensive set of 11 impact resistant trim tools for the safe removal and installation of interior and exterior trim, door panels, dash and upholstery panels, body mouldings and emblems. Í Supplied in a handy wallet.

Trim Remover Kit 4pc 7396 Trim clip removal kit in high chromed finish with soft grip handles and packed in a sturdy wallet. Í Ideal for door panels, trim and trim clip removal. Í Contents: Large U-shaped clip remover, small U-shaped clip remover, large V-shaped clip remover, round trim remover. Í Stainless steel heat treated shafts.

£29. 95

£29. 95

Double Ended Trim Clip Set – 2pc 9182 A set of 2 doubled ended trim tools, suitable for gently easing apart push-fit plastic components and removing both interior/ exterior trim clips. Í U notched ends are Í Overall length: 173mm; width: 15mm; jaw width: 5 & 7mm. £24. 95 curved, angled & tapered to ensure ease of use.

Windscreen Washer Pipe Repair Kit 36757 A one stop box, offering the most common components found in windscreen, headlamp and rear window washer systems allowing the technician to replace broken and degraded hoses, as well as stuck or leaking one-way valves. Í Contents: 3/16” (4.7mm) 90° elbow joints (x5), straight joints (x5), T-piece connectors (x5), one way valves (x2), 4m clear PVC tube.

£24.

95

Double Sided Tape 1pc Í Double-sided foam tape Í Colour: Olive Green Í Industrial standard general purpose tape.

Badge Tape 10pc 91464

Sticking badges and emblems back onto a vehicle after repair can be a bit time consuming. Place badge or trim onto the double-sided tape, and when it’s lifted back up any unwanted adhesive remains on the backing meaning that there is no need to trim around the outside. Í Unwanted adhesive simply peels away leaving emblem immediately ready for fixing. Í Pack of 10 strips 50 x 300mm.

CODE DIMENSIONS

PRICE £7.95 £5.95 £4.95 £3.95

35310 50mm x 10m 35309 25mm x 10m 35308 18mm x 10m 35307 12mm x 10m

£13. 95

Number Plate Screws – 100pc Number Plate Screw 10 x 1 " White, Yellow or Black Polytop 31546 Í Size: 4.8 x 24mm.

Number Plate Screw 10 x 3/4 " White, Yellow or Black Polytop 31542 Í Size: 4.8 x 18mm.

£15. 95

£15. 95

13 ToolSaver

Hurry Exclusive, limited time offers on new & best selling tools & equipment!

PDR Glue Pulling Repair

Adhesion Pro GP System with Pulling Tower 92739

A comprehensive set of GP (Glue Pull) repair tools and consumables, designed to reduce/remove dents in vehicle bodywork whilst minimising damage to the paintwork, supplied in a 4-drawer cart with foam inlays. Í Contents: Top shelf: Mini plastic scraper chisel, T-Bar puller, plastic razor blades, cold glue dent pulling kit PDR, multi-head telescopic body hammer. Middle shelf: Dent puller kit with pads, hand-operated dent puller kit 34pc. Í Drawer 1: Digital infrared thermometer, butane hot air blow gun. Drawer 2: Blue multipads, assorted puller pad set. Drawer 3: Solvent spray for hotmelt glue, glue sticks. Drawer 4: Use for sundries & consumables.

92739 Product Video

£1,949. 95

Trolley contents:

92748 Product Video

£999. 95

Adhesion Pro GP System (without pulling Tower) 92748

A comprehensive set of GP (Glue Pull) repair tools and consumables, designed to reduce/remove dents in vehicle bodywork whilst minimising damage to the paintwork, supplied in a 4-drawer cart with foam inlays.

14 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY

PROMOTIONS VALID FROM 1st Oct – 31st Dec 2025

Sanding and surface preparation

Electric Random Orbital Sander – 150mm 92696

A compact mains powered electric sander, with a random orbital action, designed for use with 150mm (6 " ) hook and loop sanding discs with dust extraction holes. It features a composite housing with a soft rubber grip, to help reduce vibration, and a rear facing exhaust for use with a dust extraction system. Í Variable speed electric sander, with hook & loop backing pad, for use with centralised dust extraction systems. Í Sanding pad: 150mm (6 " ) diameter. Í Features a 350W brushless motor with 9 preset speeds, 2,000 – 10,000 RPM. Vibration measurement: 4.79m/s2. Í Supplied with a 4m power cable fitted with a 240V 13 amp 3 pin BS plug, backing pad wrench & central vacuum adaptor. CE & RoHS compliant.

£349. 95

£179. 95

Pneumatic Spot Repair Sander Kit 7683 Ideal for spot refinishing and smart repair. Supplied with a selection of discs, pads and polishing pads. Uses workshop air. Í 90° angled head, dual action and 1pc balancer for reduced vibration. Also includes velcro pads: 2”, 1.2”; triangular mini and airline connector. Í Specification of sander: pneumatic sander with alloy steel spiral bevel gears, precision teeth 13,000rpm, 1/4” inlet, 3/8” (10mm) mini hose, 2.6ft³/min, 155mm long x 75mm deep, 0.5kg weight.

£399. 95

Surface Prep Pro 92331

An easy to use air-powered surface preparation tool suitable for use on a variety of substrates including metals, rubber and plastics. Excellent on steel and softer metals; will remove contaminants, rust, etc, and leave a bright metal surface. With the included stripe off eraser perfect for removing pinstripes, vinyl stickers, stripes, decals, etc, on painted metal surfaces, plate glass, aluminium and glassfibre. Í Features an air hose connection for dust and material extraction. Í 180° head movement allows left or right handed use. Í Hand transmitted vibration rating: 0.8m/s2.

Mini Air Sander 50mm 92607

With 50mm diameter sanding face and silencer. Suitable for most panel repair jobs, its smaller dimensions mean it is ideal for intricate, more delicate sanding. It features a safety trigger lock to prevent accidental use and has variable speed adjustment, with a maximum operating speed of 25,000rpm. Í Sanding pad: 50mm diameter. Í Fitted with a noise silencer, max 84DB. Includes safety trigger lock.

Air Belt Sander 92712 With a rotating rubber coated handle, featuring variable speed control, designed for use with 10mm x 330mm sanding belts. Perfect for working in confined spaces and ideal for sanding bodywork, alloy wheel spokes, metalwork fabrication and filing and Sanding. Í Air powered belt sander with rotating handle & rubber grip. NOTE: Oil daily. Í Designed for use with standard 10 x 330mm (3/8 x 13”) sanding belts. Í Noise level: 80dB. Vibration: 0.59m/s2. Weight: 0.77Kg.

£99. 95

Abracs Quick Lock Accessory Pack 25pc 32109 A mixed set of Abracs 50mm diameter quick-lock products, used for cleaning, stripping, polishing and finishing all using the same simple system.

£129. 95

£39. 95

15 ToolSaver

Hurry Exclusive, limited time offers on new & best selling tools & equipment!

Hybrid & EV Tool Kits

£419. 95

Insulated Power Bar 3/8 " D 430mm 8772

A fully insulated power bar, designed to loosen stubborn or corroded fixings. It features a durable rubber boot covering the flexible head, together with a large ergonomic handle. Í Max torque: 202Nm. Í Manufactured to IEC60900 standards, for safe operator use

Insulated Tool Kit 3/8"D 50pc 7383 This fully insulated tool kit is suitable for use on hybrid and electrical vehicles and are encased to prevent touching any exposed metal whilst working, reducing the risk of electrocution from live circuits up to 1000V AC or 1500V DC. Í Kit contains: 22pc 3/8"D socket set complete with extension bars, spline bits and ratchet, an 11pc screwdriver set, 6pc plier set,

£44. 95

on live voltages up to 1000V AC / 1500V DC.

1000V

Spark Resistant Fully Insulated Tool Kit 24pc 8509 Essential for working on any live high voltage applications where flammable gases may also be present. Manufactured from hard wearing Beryllium Copper which, unlike steel tools, will not spark if struck or dropped. Í Set includes open end wrenches

plus 10 protective sleeves and a cable stripping knife.

1000V

£229. 95

Insulated Tool Kit 3/8"D 25pc 6150 Í 9 x 3/8"D sockets: 7, 8, 10, 12, 14, 15, 17, 19 and 22mm. Length: 71mm. Í Accessories: Combination pliers 175mm; side cutter 150mm; 3/8"D 72 teeth ratchet; extension bar 100mm; T-handle. Cable knife. Í 6 x open end spanners: 7, 8, 10, 12, 14 and 17mm. Í 4 x screwdrivers: Phillips: Ph1

10-19mm, 1/2"D sockets 10 19mm, 1/2"D T-handle, 8 inch pliers, 6 inch side cutters and 7 assorted screwdrivers.

£1459. 95

For use on Hydrogen fuel cell vehicles

1000V

£229. 95

x 100mm, Ph2 x 100mm; Flat: 5.5 x 125mm and 4 x 100mm.

1000V

Insulated Open Ended Spanner Set 18pc 8558 A comprehensive set of fully insulated, open end spanners for use on modern hybrid and electric vehicles, including sizes from 7mm to 24mm, suitable for live working up to 1000V AC/ 1500V DC. Í Sizes: 7, 8, 9, 10, 11, 12,

Robust design can be used as a step

13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 & 24mm.

Insulated Tool Kit 3 Drawer Toolbox 27pc 8328 Robust 3 drawer

Insulated Tool Kit 3/8"D 22pc 6146

tool box containing a selection of fully insulated tools to suit the needs of any mechanic working on hybrid and electric vehicles, or by electricians. Í Combination pliers & side cutters.

Í 3/8"D ratchet with 55 teeth and quick release function; 15 x 3/8"D sockets; 2 x extension bars (75mm and 150mm long). Í Socket: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 and 20mm. Length: 46mm. Í 2 x screwdrivers: Flat 3mm, Ph1; long nose pliers; side cutters.

£229. 95

Í 2 x screwdrivers. 5 x insulated open ended spanners: 8 - 17mm. Í 3/8"D ratchet & sockets: 7 - 22mm & 100mm extension bar. Í Cable knife & 420mm long flexible magnetic pick up tool. Í CAT IV 1000V voltage tester to check for the existence &/ or absence of high-voltage on hybrid & electric vehicles.

£249. 95

1000V

1000V

16 ToolSaver

ALL OFFERS ARE AVAILABLE THROUGH YOUR LOCAL SUPPLIER ONLY

PROMOTIONS VALID FROM 1st Oct – 31st Dec 2025

£2,199. 95

£1,699. 95

Hybrid EV Cabinet Master Kit - 66pc 61724

Hybrid & EV Cabinet Comprehensive Kit - 100pc 61725

The set provides a wide range of specialist tools including insulated sets of screwdrivers, pliers, hex keys, star keys, wrenches as well as high-voltage test instruments (CAT III and CAT IV), probes and leads. The kit comes in a 7 drawer hybrid/EV roller cabinet complete with customised external supports for storing safety barrier posts and bases, together with a bracket for the rescue pole.

Part No. Description 8248 Complete set of insulated high-voltage hand tools, test instruments, vehicle and personal safety equipment designed for use on hybrid/EV vehicles. Supplied in a heavy duty 7 drawer lockable tool cabinet on castors with a 6 drawer top chest to keep tools organised and secure. With external supports for storing safety barrier posts and bases, together with a bracket for the included insulated rescue pole. Part No. Description 6048 Insulated Wrench Set 7pc 5515 Insulated Hex Key Set 6pc 5516 Insulated Star Key Set 9pc 6146 Insulated Tool Kit 3/8"D 22pc 5986 Insulated Screwdriver Set 7612 Insulated Precision Screwdriver Set 6pc 7448 Insulated Star Driver Set 7483 Insulated Combination Pliers 180mm 7570 Insulated Bent Nose Pliers 200mm 7423 Insulated Wire Stripping Pliers 7211 Insulated Magnetic Pick-Up Tool 7551 Insulated Trim Clip Tool Set 4pc 7885 Insulated Inspection Mirror 50mm 6843 Cat 1V Voltage Tester 6549 Cat 111 High-Voltage Insulation Tester 7917 Cat 111 Test Probe Set - slim fit 6543 Cat 111 Test Leads (pair) 6705 Insulated Gloves Set - Large 6632 Cotton Underliner Gloves - pack 10 6636 Arc Flash Face Shield Hybrid & EV Tool Cabinet 7dr Top Chest 6dr Plastic Posts, Bases, Chain - set of 4 Insulated Rescue Pole Electric Shock First Aid Poster Lockout Tags - pack of 10 Hybrid/EV Warning Tags - pack of 10 Safety Lockout Padlock - long hasp Nylon Lockout Hasp Disconnect Shutdown Timer Steering Wheel Cover 50cm Insulated Floor Matting Insulated Transparent Shrouding Insulated Safety Clamps x 2 Insulated Shrouds for Cables/Terminals (10) High-Voltage/No Admittance Sign Danger High-Voltage Sign High-Voltage Vehicle Roof Sign Insulated Tool Kit 3/8"D 50pc Insulated Nut Driver Set 7pc

Part No.

Description

Part No.

Description

8248 6700 8740 7941 8049 7942 7943 8246 7477 6676 6622 7550 6618 7577 7576 7574 6048 5516 5515 6146 5986

7448 7483 7570 7423 7211 7551 6843 6549 7917 6543 6705 6632

Hybrid & EV Tool Cabinet 7dr

Insulated Star Driver Set

5082 6700 8740 7575 7941 8049 7943 7942 7477 8246 6622 6676 6618 7550 7576 7577 7574 7383 7482 5481

Plastic Posts, Bases, Chain - set of 4

Insulated Combination Pliers 180mm Insulated Bent Nose Pliers 200mm Insulated Wire Stripping Pliers Insulated Magnetic Pick-Up Tool Insulated Trim Clip Tool Set 4pc Cat 111 High-Voltage Insulation Tester Cat 111 Test Probe Set - slim fit Cat 111 Test Leads (pair) Insulated Gloves Set - Large Cotton Underliner Gloves - pack 10 Cat 1V Voltage Tester

Insulated Rescue Pole Lockout Tags - pack of 10

Hybrid/EV Warning Tags - pack of 10

Nylon Lockout Hasp

Safety Lockout Padlock - long hasp Steering Wheel Cover 50cm Disconnect Shutdown Timer Insulated Transparent Shrouding

Insulated Floor Matting

Insulated Shrouds for Cables/Terminals (10)

Insulated Safety Clamps x 2 Danger High-Voltage Sign

High-Voltage/No Admittance Sign High-Voltage Vehicle Roof Sign Insulated Wrench Set 7pc Insulated Star Key Set 9pc Insulated Hex Key Set 6pc Insulated Tool Kit 3/8"D 22pc Insulated Screwdriver Set

1000V

Insulated Torque Wrench 3/8"D 5 - 25Nm

£499. 95

£999. 95

£649. 95

EV Tool Kit in Storage Bag 9051

EV Technicians Pro Kit in Storage Bag 9052 An EV safety and tools kit, supplied in a Laser EV tools storage bag, containing all of the essential requirements for EV emergency service/repair work, along with selected high voltage diagnostic testing.

EV Recovery Operators Safety Kit 9053 An EV safety and tools kit, supplied in a Laser EV tools storage bag, specifically created for roadside recovery operators, to ensure safety of the operator, and minimise high voltage risk.

An EV safety equipment and tools kit, supplied in a Laser EV tools storage bag, containing all of the essential requirements for emergency EV service/ repair work.

17 ToolSaver

Hurry Exclusive, limited time offers on new & best selling tools & equipment!